Hardware (page 3)

Nachi MZ12-01MZ12-01The MZ12-01 is a six-axis articulated industrial robot from Nachi with a 12 kg payload and a 1454 mm maximum reach. It uses AC servo drives and has a point-to-point repeatability of ±0.04 mm. The arm is IP67 compliant and can be mounted on the floor, tilted, or inverted/ceiling for machine tending, material handling, palletizing and dispensing work.
Nachi MZ35FMZ35FThe Nachi MZ35F is a six-axis articulated industrial robot driven by AC servo motors, intended for machine tending, material handling, palletizing and dispensing. It has a 35 kg wrist payload and a 2102 mm maximum reach, with a hollow wrist that allows cables to be routed inside the arm. The body is rated IP67 equivalent and is supplied with anti-corrosion treatment and anti-coolant coating for wet or dirty work areas.
Nachi MZ50FMZ50FThe Nachi MZ50F is a six-axis articulated industrial robot with a hollow wrist for internal cable routing. It is intended for machine tending, material handling, palletizing, and dispensing, and is rated IP67 equivalent for harsh environments. Its position repeatability is ±0.06 mm, with a stated payload of 50 kg and reach of 2102 mm.
Nachi MZ70FMZ70FThe Nachi MZ70F is a six-axis articulated industrial robot with a 70 kg payload and 2,102 mm maximum reach. It is intended for machine tending, material handling, palletizing, and dispensing. The robot has a hollow wrist for internal cable routing, IP67-equivalent protection, and a repeatability of ±0.06 mm.
Nachi NB04LNB04LThe Nachi NB04L is a six-axis vertical articulated robot intended for arc welding, with a 4 kg payload, a 2008 mm reach and 277 kg mass. The welding cable runs coaxially through the arm in an enclosed cable design, which the document states improves wire feeding and prevents snags. It can be mounted on the floor, wall or ceiling, and positional repeatability is ±0.08 mm at the tool centre point.
Nachi Robotics LP210-01LP210-01The Nachi Robotics LP210-01 is a four-axis articulated palletizing robot with a 210 kg wrist payload and 3210 mm maximum reach. It is floor-mounted, uses an AC servo drive system, and has a 1150 kg robot mass. The LP series includes palletizing software for teaching stacking routines and generating program paths.
Nachi Robotics MC20MC20The Nachi MC20 is a six-axis articulated industrial robot. It has a 20 kg payload, a 1722 mm horizontal reach, and a position repeatability of ±0.05 mm. The arm is IP65 rated and can be mounted on the floor or ceiling.
Nachi Robotics MC280LMC280LThe MC280L is a six-axis articulated industrial robot from Nachi Robotics for heavy lifting and extended-reach tasks. It has a 280 kg payload and a 3101 mm maximum reach, with ±0.2 mm position repeatability. It is listed for machine tending, material handling, palletizing, and spot welding, and mounts on the floor.
Nachi Robotics MC350MC350The MC350 is an industrial robot designed for heavy and repetitive lifting tasks with a payload capacity of 350 kg. It provides a 2771 mm working envelope, allowing work on several products or machines at once. It is intended for large-scale lifting operations such as car bodies, engines, and foundry components.
Nachi Robotics MC400LMC400LThe Nachi MC400L is a six-axis articulated industrial robot with a 400 kg wrist payload and a 3756 mm reach. It is floor-mounted and has a position repeatability of ±0.3 mm. It is used for machine tending, material handling, palletizing, and spot welding.
Nachi Robotics MC470PMC470PThe MC470P is a six-axis articulated industrial robot from Nachi Robotics. It has a 470 kg payload and a 2,771 mm maximum reach, with ±0.2 mm position repeatability. It is floor-mounted and intended for material handling and palletizing.
Nachi Robotics MC600MC600The Nachi MC600 is a floor-mounted articulated robot with six axes. It is intended for lifting, transferring, and handling large industrial parts, with a 2,890 mm working envelope and ±0.3 mm position repeatability. Listed applications include machine tending, material handling, and spot welding.
Nachi Robotics MR20MR20The MR20 is a seven-axis articulated robot for machine tending and material handling. It has a 20 kg payload and 1260 mm reach, with repeatability of ±0.06 mm. It supports floor and invert/ceiling mounting.
Nachi Robotics MR35MR35The MR35 is a seven-axis industrial robot with a 35 kg payload and 2050 mm reach. It repeats to ±0.07 mm and has an IP67 rating for harsh manufacturing environments. It is intended for machine tending and material handling and can be mounted on the floor, wall, or ceiling/inverted.
Nachi Robotics MR50MR50The MR50 is a 7-axis industrial robot from Nachi Robotics with a 50 kg payload and 2050 mm reach. It is intended for machine tending and material handling, and its IP67 rating supports use in harsh manufacturing environments. The robot can be mounted on the floor, wall, angled surfaces, or inverted ceiling.
Nachi Robotics MZ01MZ01The Nachi MZ01 is a 6-axis articulated industrial robot with a 350 mm maximum reach and a 1 kg rated payload. It weighs 10 kg and has ±0.02 mm position repeatability. The specifications identify robot type MZ01-02 and list assembly, dispensing, machine tending, material handling and palletizing applications.
Nachi Robotics MZ03EL-02MZ03EL-02The MZ03EL-02 is a six-axis articulated robot arm driven by AC servo motors, with a 1102 mm maximum reach and a 3.5 kg wrist payload. It is built with through-arm routing for hoses and cables, two φ6 air tubes and ten application signal wires. It can be floor, wall, tilted or inverted mounted and is rated IP67 equivalent for dust and drip protection.
Nachi Robotics MZ07-01MZ07-01The MZ07-01 is a 6-axis articulated industrial robot with a 7 kg wrist payload and 723 mm maximum reach. It uses AC servo motors, has ±0.02 mm position repeatability, and is rated IP67 equivalent for dust and drip protection. It can be mounted on the floor, wall, angle, or ceiling and is intended for material handling, assembly, vision, and other applications.
Nachi Robotics MZ07FMZ07FThe MZ07F is a six-axis articulated industrial robot with a hollow wrist for routing tool cables and hoses. It has a 7 kg payload and 723 mm reach, with ±0.015 mm position repeatability. It is intended for machine tending, material handling, palletizing, and dispensing.
Nachi Robotics MZ12WMZ12WThe Nachi MZ12W is a six-axis vertically articulated industrial robot built for wall, floor, tilted or inverted mounting, so it can be installed where floor space is limited. It carries a 12 kg wrist payload with a maximum reach of 1564 mm and repeats positions to within ±0.04 mm using AC servo motors on all six axes. Applications listed are machine tending, material handling, palletizing, dispensing, board transport, assembly and precision inspection.
Nachi Robotics MZ35SMZ35SThe MZ35S is a 6-axis articulated industrial robot with a 35 kg wrist payload and 1882 mm maximum reach. It has a hollow wrist with internally routed cables, IP67-equivalent wrist protection, and a 250 kg robot mass. It is intended for machine tending, material handling, palletizing, and dispensing.
Nachi Robotics MZ50LFMZ50LFThe Nachi MZ50LF is a six-axis articulated industrial robot with a 50 kg wrist payload and 2502 mm maximum reach. It uses AC servo motors and routes wiring through a hollow wrist. It is rated IP67 equivalent and intended for floor or inverted installation.
Nachi Robotics SRA100BSRA100BThe Nachi Robotics SRA100B is a six-axis articulated industrial robot driven by AC servo motors, intended for spot welding and other handling applications. It has a 100 kg wrist payload, a reach of 2,071 mm, and ±0.1 mm position repeatability. The robot weighs 690 kg and is floor-mounted.
Nachi Robotics SRA100J-01SRA100J-01The SRA100J-01 is a six-axis articulated industrial robot from Nachi's SRA series, driven by AC servo motors and intended for spot welding and other material-handling tasks. It has a 100 kg payload, a 1,634 mm reach, and ±0.1 mm repeatability, with floor mounting and an operating temperature range of 0 to 45 °C.
Nachi Robotics SRA120EL-01SRA120EL-01The Nachi SRA120EL-01 is a six-axis articulated industrial robot in the SRA series, configured as a long-arm spot-welding robot. It has a 120 kg payload, a 3,099 mm reach and ±0.15 mm position repeatability, and is floor mounted.
Nachi Robotics SRA133HSRA133HThe Nachi SRA133H is a six-axis articulated industrial robot intended for spot welding, machine tending, material handling, and palletizing. It has a 133 kg wrist payload, a 2654 mm reach, and ±0.1 mm position repeatability. The robot is floor-mounted and uses an AC servo drive system.
Nachi Robotics SRA133HL-01SRA133HL-01The Nachi Robotics SRA133HL-01 is a six-axis articulated industrial robot for spot welding, machine tending, material handling, palletizing, and dispensing. It has a 133 kg payload and ±0.15 mm position repeatability. The hollow arm routes pneumatic, power, and servomotor cables internally, and the SRA series is paired with FD controllers.
Nachi Robotics SRA166SRA166The Nachi Robotics SRA166 is a floor-mounted industrial robot in the SRA series, intended for spot welding and other material-handling tasks. It has a 166 kg payload and a 2,654 mm reach. Nachi lists the robot weight as 1,060 kg.
Nachi Robotics SRA166H-01SRA166H-01The Nachi SRA166H-01 is a six-axis articulated industrial robot with a 166 kg wrist payload and 2,654 mm reach. It is floor-mounted and uses an AC servo drive system, intended for spot welding, machine tending, material handling, and palletizing. It is paired with a Nachi FD controller for motion and servo-gun control.
Nachi Robotics SRA166LSRA166LThe Nachi SRA166L is a six-axis articulated industrial robot. It is intended for spot welding, machine tending, material handling, palletizing, and dispensing. The document lists a 166 kg payload, 2951 mm reach, ±0.15 mm position repeatability, and 980 kg robot mass.
Nachi Robotics SRA166TLSRA166TLThe Nachi SRA166TL is a six-axis articulated industrial robot. The document lists a 166 kg payload and 3383 mm reach, with floor or shelf mounting. It is intended for material handling and spot welding, and uses FD controllers for motion and servo gun control.
Nachi Robotics SRA210H-01SRA210H-01The Nachi Robotics SRA210H-01 is a six-axis articulated industrial robot in the SRA-H series, intended for spot welding and handling applications. It uses a hollow arm to route pneumatic, power, and servomotor cables internally, and it is floor mounted. The document lists a 210 kg wrist payload, 2,654 mm reach, and ±0.15 mm position repeatability.
Nachi SRA100SRA100The Nachi SRA100 is an industrial robot in the SRA series, intended for spot welding and other applications. It has a payload of 100 kg and a reach of 2654 mm, and weighs 960 kg. The robot is floor-mounted and supports machine tending, material handling, palletizing, spot welding, and dispensing.
Nachi SRA100H-01SRA100H-01The Nachi SRA100H-01 is a six-axis articulated industrial robot driven by AC servo motors. It is intended for spot welding and related automotive applications, with a 100 kg wrist payload and 2654 mm reach. The robot uses a hollow arm for internal routing of pneumatic, power and servomotor cables.
Nachi SRA100HB-01SRA100HB-01The Nachi SRA100HB-01 is a six-axis articulated industrial robot. It has a 100 kg payload, a 2044 mm reach, and floor mounting. Its hollow arm routes pneumatic, power, and servomotor cables internally for spot-welding installations.
Nachi SRA133L-01SRA133L-01The SRA133L-01 is a six-axis articulated AC servo robot in Nachi's SRA series, built for spot welding in automotive body assembly and also used for machine tending, material handling, palletizing and dispensing. It carries a 133 kg payload, reaches 2,951 mm and holds ±0.15 mm position repeatability, and is floor mounted. Motion is programmed through the Nachi FD controller, which also provides servo gun control for spot welding.
Nachi SRA166TSRA166TThe SRA166T is a six-axis articulated industrial robot built by Nachi for spot welding and material handling. It carries a 166 kg payload, reaches 3086 mm and weighs 1310 kg, and is driven by AC servo motors. It is normally paired with Nachi's FD controller, whose servo gun software controls electrode closing and weld pressure.
Nachi SRA210SRA210The Nachi SRA210 is a floor-mounted industrial robot with a 210 kg payload and 2,674 mm reach, intended for machine tending, material handling, palletizing, and spot welding. It weighs 1,090 kg and is paired with Nachi FD controllers for spot welding motion and servo gun control.
Nachi SRA210TSRA210TThe Nachi SRA210T is a six-axis articulated robot of the SRA series, built for spot welding and material handling with a 210 kg payload and a 3106 mm reach. It is driven by AC servo motors and is paired with a Nachi FD controller that provides servo gun control and an integrated spot weld timer. The robot mounts on the floor or on a shelf mount and can be fitted with the A-Trac cable management system.
Nachi SRA210VSRA210V-01The Nachi SRA210V is a six-axis articulated robot built as the ceiling (inverted) mount version of the SRA210, aimed at spot welding cells in automotive production. It uses AC servo motors on all six axes and carries a 210 kg wrist payload with a 2674 mm reach and ±0.15 mm position repeatability. The robot mass is 990 kg and it is driven by Nachi's FD controller with servo gun software for spot welding.
Nachi SRA240SRA240The Nachi SRA240 is a floor-mounted industrial robot in the SRA series. It has a 240 kg payload and a 2,674 mm reach, and is listed for machine tending, material handling, palletizing, and spot welding. The document names an FD controller for SRA series robots but gives no further controller model.
Nachi SRA250-01SRA250-01The Nachi SRA250-01 is a six-axis articulated industrial robot with a 250 kg wrist payload and a 2,792 mm reach. It is floor-mounted and uses AC servo motors, with applications listed as machine tending, material handling, palletizing, and spot welding. The document states that it is paired with a Nachi FD controller and servo-gun software for spot welding.
Yaskawa Motoman AR1440AR1440The Yaskawa Motoman AR1440 is a six-axis industrial robot for arc welding applications. It has a 12 kg payload, a 1440 mm horizontal reach, and a 2511 mm vertical reach. The arm includes a 50 mm thru-hole and a symmetric wrist for torch access to both sides of a part.
Yaskawa Motoman AR1440EAR1440EThe AR1440E is a seven-axis industrial robot from Yaskawa Motoman intended for arc welding. It has a 6.0 kg payload and a 1440 mm horizontal reach. An additional axis between the second and third axes allows the overall arm reach to be shortened or lengthened.
Yaskawa Motoman AR1730AR1730The Yaskawa Motoman AR1730 is a six-axis industrial robot for arc welding. It has a 25.0 kg payload, 1730 mm horizontal reach, 3089 mm vertical reach, a contoured arm, and a 50 mm thru-hole for cable routing.
Yaskawa Motoman AR2010AR2010The Yaskawa Motoman AR2010 is an industrial robot for arc welding applications. It has a 12.0 kg payload, a 2010 mm horizontal reach and a 3649 mm vertical reach, and it uses the YRC1000 controller. The arm has a 50 mm thru-hole and a feeder mounting area.
Yaskawa Motoman AR3120AR3120The Yaskawa Motoman AR3120 is a six-axis industrial robot for arc welding. It has a 20.0 kg payload, 3124 mm horizontal reach and 5622 mm vertical reach. The document names a YRC1000 controller and a 50 mm thru-hole for torch cabling, hoses and sensor wires.
Yaskawa Motoman AR700AR700The Yaskawa Motoman AR700 is an industrial robot intended for arc welding. It has an 8.0 kg payload and a horizontal reach of 727 mm; the document also gives a vertical reach of 1312 mm. It is listed with a YRC1000 controller and is described as compatible with a range of sensors and torches.
Yaskawa Motoman AR900AR900The Yaskawa Motoman AR900 is an industrial robot intended for arc welding applications. It has a 7.0 kg payload and a 927 mm horizontal reach, with a 1693 mm vertical reach. The document lists a YRC1000 controller for the robot.
Yaskawa Motoman GA50GA50The GA50 is a six-axis industrial robot with a 50.0 kg payload and 2038 mm horizontal reach. The document lists a 3161 mm vertical reach and applications in arc welding, dispensing, material removal, and material cutting/trimming. It states that the robot is controlled by a YRC1000 controller.
Yaskawa Motoman GP-SeriesGP-SeriesThe Yaskawa Motoman GP-Series is an industrial robot with a 12.0 kg payload, 2010 mm horizontal reach, and 3649 mm vertical reach. It is an extended-reach design intended for transferring large parts in workcells where multiple robots operate close together. The manipulator connects to a YRC1000 controller with a single cable.
Yaskawa Motoman GP110GP110The Yaskawa Motoman GP110 is a six-axis industrial robot with a 110 kg payload and 2236 mm horizontal reach. It is intended for die casting, dispensing, machine tending, material removal, material cutting/trimming and material handling. The robot is used with the YRC1000 controller and is pre-wired for a servo gripper.
Yaskawa Motoman GP110BGP110BThe Yaskawa Motoman GP110B is a 7-axis industrial robot intended for large and heavy handling applications. It has a 110 kg payload, 2236 mm horizontal reach and 3792 mm vertical reach, and is controlled by a YRC1000 controller. Its reduced-interference design supports high-density placement, and its motion range supports obstacle avoidance and reaching parts in challenging spaces.
Yaskawa Motoman GP12GP12The Yaskawa Motoman GP12 is an industrial robot with a 12 kg payload, 1440 mm horizontal reach, and 2511 mm vertical reach. It is controlled by a YRC1000 or YRC1000micro controller and is intended for assembly, material handling, part transfer, and pick-and-pack applications. The manipulator connects to the controller with a single cable.
Yaskawa Motoman GP165RGP165RThe Yaskawa Motoman GP165R is a six-axis industrial robot with a 165.0 kg payload. It has a horizontal reach of 3140 mm and a vertical reach of 4782 mm, and the document specifies a YRC1000 controller. The document lists die casting, machine tending, material removal, material cutting/trimming, material handling, part transfer, and press tending as applications.
Yaskawa Motoman GP180GP180The Yaskawa Motoman GP180 is a six-axis industrial robot with a 180 kg payload and 2,702 mm horizontal reach. It is intended for high-payload handling applications such as die casting, machine tending, material cutting/trimming, material handling and press tending. It has a streamlined upper arm and a wide wrist motion range for access to parts in confined spaces.
Yaskawa Motoman GP180-120GP180-120The Yaskawa Motoman GP180-120 is an industrial robot for large-part, high-payload handling applications. It has a 120 kg payload, 3058 mm horizontal reach, 4105 mm vertical reach, and uses a YRC1000 controller. The design eliminates the need for a linear track and uses a contoured upper arm and reduced-interference layout to access parts in tight areas.
Yaskawa Motoman GP200RGP200RThe GP200R is a shelf-mounted industrial robot with a 200 kg payload, a 3140 mm horizontal reach, and a 4782 mm vertical reach. It is intended for die casting, machine tending, material removal, cutting/trimming, material handling, part transfer, and press tending. The document lists a YRC1000 controller.
Yaskawa Motoman GP200SGP200SThe Yaskawa Motoman GP200S is a six-axis industrial robot with a 200 kg payload. It has a 1886 mm horizontal reach and a 2295 mm vertical reach, and is intended for tasks such as machine tending, material handling, part transfer, and press tending. The document lists a YRC1000 controller.
Yaskawa Motoman GP20HLGP20HLThe Yaskawa Motoman GP20HL is a six-axis industrial robot with a 20 kg payload, 3124 mm horizontal reach, and 5622 mm vertical reach. It has a hollow arm for cable routing and is intended for machine tending, material handling, and part transfer. The robot is used with a YRC1000 controller.
Yaskawa Motoman GP215GP215The Yaskawa Motoman GP215 is a six-axis industrial robot with a 215.0 kg payload. It has 2912 mm horizontal reach and 3894 mm vertical reach. The document lists die casting, machine tending, material handling, part transfer, and press tending as applications.
Yaskawa Motoman GP225GP225The Yaskawa Motoman GP225 is a six-axis industrial robot with a 225 kg payload and 2702 mm horizontal reach. It is intended for die casting, machine tending, material handling, press tending, material removal, cutting/trimming, and part transfer. The document names a YRC1000 controller.
Yaskawa Motoman GP25GP25The Yaskawa Motoman GP25 is an industrial robot with a 25 kg payload, 1730 mm horizontal reach and 3089 mm vertical reach. It uses a YRC1000 controller and can be programmed with either a standard teach pendant or a touchscreen Smart Pendant. The document lists it for handling, packaging and other material-transfer tasks.
Yaskawa Motoman GP250GP250The GP250 is a six-axis industrial robot from Yaskawa Motoman with a 250 kg payload. It has a horizontal reach of 2710 mm and a vertical reach of 3490 mm. The document lists die casting, machine tending, material handling, part transfer, and press tending as applications.
Yaskawa Motoman GP280GP280The GP280 is a six-axis industrial robot with a 280 kg payload and a 2446 mm horizontal reach. It is intended for heavy part processing, machine tending, material handling, and press tending. The document lists a 2962 mm vertical reach, a wide wrist motion range, and high moment and inertia ratings.
Yaskawa Motoman GP280LGP280LThe GP280L is a six-axis industrial robot from Yaskawa Motoman aimed at high-payload handling work. It carries a 280 kg payload with a 3114 mm horizontal reach and a 3552 mm vertical reach. The document lists dispensing, machine tending, material cutting/trimming, material handling and press tending as applications.
Yaskawa Motoman GP35LGP35LThe GP35L is a Yaskawa Motoman industrial robot with a 35.0 kg payload and 2538 mm horizontal reach. It is listed for dispensing, machine tending, material removal, material handling, part transfer and press tending applications. The document describes an extended reach and a wide wrist motion intended to reduce interference in confined areas.
Yaskawa Motoman GP4GP4The Yaskawa Motoman GP4 is a six-axis industrial robot with a 4.0 kg payload and 550 mm horizontal reach. It is compatible with YRC1000 and YRC1000micro controllers and has an IP67 rating. It is intended for assembly, machine tending, material handling, and pick-and-pack applications.
Yaskawa Motoman GP400GP400The Yaskawa Motoman GP400 is a six-axis industrial robot with a 400 kg payload. It has a 2942 mm horizontal reach and a 2898 mm vertical reach, and uses a YRC1000 controller. It is intended for heavy-payload tasks such as machine tending, press tending, material handling, cutting/trimming, material removal, and die casting.
Yaskawa Motoman GP400RGP400RThe Yaskawa Motoman GP400R is a shelf-mounted industrial robot with a 400 kg payload and 3518 mm horizontal reach. It is intended for machine tending, press tending, part transfer, material handling, material removal, and cutting or trimming; the document also lists a 4908 mm vertical reach.
Yaskawa Motoman GP50GP50The Yaskawa Motoman GP50 is a long-reach industrial robot with a 50 kg payload. It is intended for applications such as die casting, dispensing, machine tending, material handling and press tending. The document lists a YRC1000 controller, 2061 mm horizontal reach and 3578 mm vertical reach.
Yaskawa Motoman GP600GP600The GP600 is an industrial robot from Yaskawa Motoman with a 600 kg payload and a 2942 mm horizontal reach. It uses parallel-link arm construction and is listed for dispensing, machine tending, material removal, material cutting/trimming, material handling, part transfer, and press tending. The document lists a YRC1000 controller and IP65-67 protection.
Yaskawa Motoman GP7GP7The Yaskawa Motoman GP7 is a 7 kg payload industrial robot with a 927 mm horizontal reach and a 1693 mm vertical reach. It is controlled by the YRC1000 or YRC1000micro controller and can be programmed with the standard pendant or the Smart Pendant. It is intended for assembly, material handling, part transfer, pick and pack, and pick and place applications.
Yaskawa Motoman GP70LGP70LThe Yaskawa Motoman GP70L is a six-axis industrial robot with a 70.0 kg payload. It has a 2732 mm horizontal reach and a 4715 mm vertical reach and is controlled by a YRC1000 controller. The document lists applications including die casting, dispensing, machine tending, material removal, material cutting/trimming, material handling, part transfer, and press tending.
Yaskawa Motoman GP8GP8The Yaskawa Motoman GP8 is an industrial robot with an 8.0 kg payload, 727 mm horizontal reach, and 1312 mm vertical reach. It can be controlled by either the YRC1000 or YRC1000micro controller and is listed for assembly, machine tending, material handling, part transfer, pick and pack, and pick and place. A single cable connects the manipulator to the controller.
Yaskawa Motoman GP88GP88The Yaskawa Motoman GP88 is a six-axis industrial robot with an 88.0 kg payload, 2236 mm horizontal reach, and 3751 mm vertical reach. It is controlled by the YRC1000 controller and is intended for assembly, die cast, dispensing, machine tending, material removal, material cutting/trimming, material handling, part transfer, and press tending.
Yaskawa Motoman GP8LGP8LThe GP8L is a six-axis industrial robot from Yaskawa Motoman with an 8.0 kg payload, a 1636 mm horizontal reach and a 2894 mm vertical reach. It is intended for high-speed handling work such as bin picking, induction, packaging, assembly, dispensing, machine tending and part transfer. A long reach, reduced-interference arm and narrow wrist let it work in tight spaces and be placed close together in dense layouts.
Yaskawa Motoman MH900MH900The Yaskawa Motoman MH900 is a heavy-duty industrial robot for high payload handling tasks. It is used for machine tending and part transfer, and can move large weldments, car bodies, agricultural equipment, and pallet loads of bricks. It is paired with the DX2900 controller, which provides ease of programming and control-reliable software for guarding (FSU).
Yaskawa Motoman MHP45LMHP45LThe MHP45L is a six-axis handling robot from Yaskawa Motoman intended for painting applications. It has a 45.0 kg payload, 2850 mm horizontal reach and 5373 mm vertical reach, and uses the DX200-FM controller. It is available in left- and right-arm configurations.
Yaskawa Motoman MPX1150MPX1150The MPX1150 is a six-axis robot for painting contoured parts, including interior and exterior surfaces. It has a 5.0 kg payload, 727 mm horizontal reach and 1290 mm vertical reach. It can be floor, wall or ceiling mounted.
Yaskawa Motoman MPX1400MPX1400The MPX1400 is a six-axis Yaskawa Motoman robot for dispensing and painting applications. It has a 5 kg payload, 1256 mm horizontal reach, and 1852 mm vertical reach. The robot is controlled by the DX200-FM controller and is FM approved for Class I, Div. 1 hazardous environments.
Yaskawa Motoman MPX1950MPX1950The MPX1950 is a six-axis painting robot. It has a 7 kg payload, 1450 mm horizontal reach, and a hollow inline wrist. It can be mounted on the floor, wall, or ceiling and is controlled by the DX200-FM controller.
Yaskawa Motoman MPX2600MPX2600The MPX2600 is a six-axis industrial robot intended for painting and dispensing contoured parts such as interior and exterior surfaces. It has a 15.0 kg payload, a 2000 mm horizontal reach and a 3643 mm vertical reach. Its hollow wrist has a 70 mm inside diameter for mounting spray equipment applicators, and it can be floor, wall or ceiling mounted.
Yaskawa Motoman MPX3500MPX3500The MPX3500 is a six-axis painting robot with a 15.0 kg payload, 2700 mm horizontal reach and 5095 mm vertical reach. Its hollow wrist has a 70 mm inside diameter for mounting spray equipment applicators. It can be floor, wall or ceiling mounted and is operated by the DX200-FM paint robot controller.
Yaskawa Motoman MPXL2600MPXL2600The Yaskawa Motoman MPXL2600 is a six-axis industrial robot for painting and dispensing applications. It has a 10.0 kg payload, 2100 mm horizontal reach and 3844 mm vertical reach. It uses the DX200-FM controller and is approved for Class I, Division 1 hazardous environments.
Yaskawa Motoman MotoMiniMotoMiniThe Yaskawa Motoman MotoMini is a small robotic arm with a 0.5 kg payload, 350 mm horizontal reach, and 495 mm vertical reach. It is specified with a YRC1000micro controller and internal cabling and air lines. The document lists assembly, dispensing, machine tending, material handling, pick and pack, and pick and place as applications.
Yaskawa Motoman NEX20NEX20The Motoman NEXT NEX20 is an industrial robot with a 20 kg payload, 1,552 mm horizontal reach and 2,699 mm vertical reach. It uses the YNX1000 controller and an integrated Autonomous Control Unit based on NVIDIA Jetson Orin. The robot has 0.02 mm repeatability and an IP67 rating.
Yaskawa Motoman NEX35NEX35The Motoman NEXT NEX35 is an industrial robot with a 35 kg payload and 2,063 mm horizontal reach. It has 0.04 mm repeatability and an IP67 rating. It uses the YNX1000 controller and is listed for assembly, material handling, and pick-and-pack applications.
Yaskawa Motoman NEXT NEX7NEXT NEX7The Motoman NEXT NEX7 is an industrial robot with a 7 kg payload, 927 mm horizontal reach, and 1693 mm vertical reach. It has 0.01 mm repeatability and an IP67 rating, and uses the YNX1000 controller with an integrated Autonomous Control Unit. It is intended for assembly, material handling, and pick-and-pack tasks.
Yaskawa Motoman PH130RFPH130RFThe Yaskawa Motoman PH130RF is a six-axis shelf-mounted industrial robot with a 130 kg payload. It has a 3474 mm horizontal reach and is intended for material handling and press tending. The robot uses the YRC1000 controller.
Yaskawa Motoman PH200RFPH200RFThe PH200RF is a six-axis shelf-mounted industrial robot. It has a 200 kg payload, a 3505 mm horizontal reach, and a 2629 mm vertical reach. It is used for material handling and press tending and is controlled by a YRC1000 controller.
Yaskawa Motoman PL190PL190The Yaskawa Motoman PL190 is a 4-axis industrial robot with a 190 kg payload and 3159 mm horizontal reach. The document lists palletizing and pick-and-pack applications, a YRC1000 controller and an IP65-67 rating. It also notes internally routed cables and airlines and a 75 mm pass-through on the T-axis for end-of-arm tooling.
Yaskawa Motoman PL500PL500The Yaskawa Motoman PL500 is a 4-axis industrial robot for palletizing, order picking, and logistics tasks. It has a 500 kg payload, 3159 mm horizontal reach, and 3024 mm vertical reach, and uses a YRC1000 controller. Its parallel-link construction and internally routed airlines and cables support handling large unbalanced loads and connecting end-of-arm tooling.
Yaskawa Motoman PL80PL80The Yaskawa Motoman PL80 is a five-axis palletizing robot with an 80 kg payload and a 2061 mm horizontal reach. It is used for palletizing, depalletizing, layer picking, and layer forming. The robot has an IP67-rated wrist and an IP54 body as standard.
Yaskawa Motoman PL800PL800The Yaskawa Motoman PL800 is a four-axis industrial robot used for palletizing, unitized loads, and end-of-line or distribution automation. It carries an 800.0 kg payload and has a 3159 mm horizontal reach. Its parallel-link construction and heavy-duty bearings support load transfer, and the T-axis has a 100 mm pass-through for connecting the end-of-arm tool.
Yaskawa Motoman SP100SP100The Yaskawa Motoman SP100 is a six-axis industrial robot for spot welding. It has a 100 kg payload and a 2236 mm horizontal reach. The robot uses the YRC1000 controller and supports spot welding tooling and controller connectivity.
Yaskawa Motoman SP100BSP100BThe Yaskawa Motoman SP100B is a 7-axis industrial robot intended for spot welding. It has a 100 kg payload, a horizontal reach of 2236 mm, and a vertical reach of 3792 mm.
Yaskawa Motoman SP110HSP110HThe Yaskawa Motoman SP110H is an industrial robot with a 110 kg payload and a 2044 mm horizontal reach. It is used for dispensing, material removal, material cutting/trimming, material handling, and spot welding. The robot has a hollow arm with an integrated spot harness and a slim profile for reaching into tight spaces.
Yaskawa Motoman SP150RSP150RThe SP150R is a six-axis shelf-mounted industrial robot from Yaskawa Motoman. It has a 150 kg payload, 3140 mm horizontal reach, and 4782 mm vertical reach. It is intended for spot welding and uses the YRC1000 controller.
Yaskawa Motoman SP165SP165The SP165 is a six-axis industrial robot intended for spot welding applications. It carries a payload of 165.0 kg and reaches 2702 mm horizontally and 3393 mm vertically. It uses an integrated spot harness on the wrist together with servo gun and DC timer technology for spot welding control.

Industrial robot