Standards

Safety, performance and data-exchange standards

22 entries

ANSI/ISA-106.00.01-2023 Procedure Automation for Continuous Process OperationsANSI/ISA-106.00.01-2023ANSI/ISA-106.00.01-2023 is a standard for automating procedures in continuous process operations. It defines models for physical systems, procedures and implementations, and provides implementation strategies and lifecycle guidance for procedure development and maintenance. It also addresses operator interaction, exception handling, roles and responsibilities, and alignment with business goals and regulatory requirements.
ASME Y14.5-2018Y14.5-2018ASME Y14.5-2018 is a standard that establishes symbols, rules, definitions, requirements, defaults, and recommended practices for stating and interpreting geometric dimensioning and tolerancing (GD&T) and related requirements on engineering drawings, models defined in digital data files, and related documents. It provides uniformity in drawing specifications and interpretation to communicate design intent for form, fit, function, and interchangeability.
EU Machinery Regulation (EU) 2023/1230Machinery Regulation (EU) 2023/1230The Machinery Regulation (EU) 2023/1230 is EU legislation that harmonises essential health and safety requirements for machinery. It combines mandatory essential health and safety requirements with voluntary harmonised standards and aligns with the New Legislative Framework. It applies on a mandatory basis from 20 January 2027.
IATF 16949:2016IATF 16949:2016IATF 16949:2016 is an automotive quality management system standard. Organizations are certified to it through IATF-recognized certification bodies, and OEM Customer Specific Requirements are used together with it. The IATF also issues Sanctioned Interpretations and Frequently Asked Questions related to the standard.
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirementsIEC 60204-1:2016IEC 60204-1:2016 is an international standard for electrical, electronic and programmable electronic equipment and systems of machines not portable by hand while working, including groups of machines working together in a coordinated manner. It gives general requirements starting at the point where the supply connects to the machine's electrical equipment. The sixth edition cancels and replaces the fifth edition and is a technical revision.
IEC 60529 Degrees of protection provided by enclosures (IP Code)IEC 60529:1989+AMD1:1999+AMD2:2013IEC 60529 defines the IP Code for classifying degrees of protection provided by enclosures for electrical equipment. It applies to equipment with a rated voltage not exceeding 72.5 kV. This consolidated version combines the second edition (1989) with Amendment 1 (1999) and Amendment 2 (2013).
IEC 61131-2:2007IEC 61131-2:2007IEC 61131-2:2007 is an international standard that specifies requirements and tests for programmable logic controllers (PLCs) and their associated peripherals, such as programming and debugging tools and human-machine interfaces. It covers functional, electrical, mechanical, environmental and construction characteristics, service conditions, safety, EMC, user programming, and tests. It is intended for equipment used to control and command machines and industrial processes.
IEC 61499-1:2012 Function blocks - Part 1: ArchitectureIEC 61499-1:2012IEC 61499-1:2012 defines a generic architecture for using function blocks in distributed industrial-process measurement and control systems. It specifies implementable reference models, textual syntax and graphical representations, intended to be domain-independent and extensible to other standards or application domains. The second edition is a technical revision of the 2005 edition.
IEC 61508-1:2010IEC 61508-1:2010IEC 61508-1:2010 is a basic safety publication that gives general requirements for electrical/electronic/programmable electronic (E/E/PE) safety-related systems when they carry out safety functions. It is intended to support the development of product- and application-sector international standards and to allow E/E/PE safety-related systems to be developed where such sector standards do not exist. This second edition cancels and replaces the first edition published in 1998 and is a technical revision.
IEC 61511-1:2016 Functional safety – Safety instrumented systems for the process industry sector – Part 1IEC 61511-1:2016IEC 61511-1:2016 is an international standard that gives requirements for the specification, design, installation, operation and maintenance of a safety instrumented system (SIS) so that it can be entrusted to achieve or maintain a safe state of the process. It was developed as a process sector implementation of IEC 61508:2010. It is Part 1 of the IEC 61511 series and covers framework, definitions, system, hardware and application programming requirements.
IEC 62061 Safety of machinery - Functional safety of safety-related control systemsIEC 62061IEC 62061 is a machinery sector standard that specifies requirements and recommendations for the design, integration and validation of safety-related control systems (SCS) for machines. It applies to control systems used to carry out safety functions on machines that are not portable by hand while working, including coordinated groups of machines. It is a sector-specific standard within IEC 61508 and addresses functional safety in high/continuous demand mode.
IEC 62264-1:2013 Enterprise-control system integration - Part 1: Models and terminologyIEC 62264-1:2013IEC 62264-1:2013 is Part 1 of the IEC 62264 series, also known as ISA-95. It describes the manufacturing operations management domain at Level 3 and the interface content and transactions within Level 3 and between Level 3 and Level 4. It provides models and terminology for integrating manufacturing operations and control systems with enterprise systems.
IEC 62443-3-3IEC 62443-3-3IEC 62443-3-3:2013 is an international standard in the Industrial communication networks - Network and system security series, Part 3-3: System security requirements and security levels. It provides detailed technical control system requirements (SRs) tied to the seven foundational requirements (FRs) described in IEC 62443-1-1, and defines requirements for control system capability security levels, SL-C. These are used with defined zones and conduits for the system under consideration (SuC) to develop the target SL, SL-T, for a specific asset.
IEC 63278-1:2023IEC 63278-1:2023IEC 63278-1:2023 is an International Standard that defines the structure of a standardized digital representation of an asset, called the Asset Administration Shell (AAS). The AAS gives uniform access to information and services so that two or more software applications can exchange information and mutually use it in a trusted and secure way. The document covers assets of manufacturing enterprises, including products and the hierarchy of industrial equipment, across industrial processes and the asset life cycle.
ISA ANSI/ISA-5.1-2024ANSI/ISA-5.1-2024ANSI/ISA-5.1-2024, Instrumentation and Control – Symbols and Identification, is a standard that defines a uniform system for depicting and identifying instruments, devices and their functions in instrumentation and control systems. It sets out consistent symbols and identification methods used in the design, installation, operation and maintenance documentation of such systems. The standard was first published in 1949; the 2024 edition updates the title to include symbols for control and adds new symbols, new reference sections and a loop instrument diagram symbol table.
ISA ISA-101.01-2015ISA-101.01-2015ISA-101.01-2015 is a standard for human machine interfaces (HMIs) in process automation systems. It specifies a lifecycle approach for design, implementation, operation, and continuous improvement. The document states it covers human-centered design, display structures, user interaction, and operator training and applies to continuous, batch, and discrete industries.
ISA ISA-18.2-2016ISA-18.2-2016ISA-18.2-2016 is a standard that sets out a framework for managing alarm systems in the process industries, covering process control, annunciator panels and safety systems. It addresses the full alarm lifecycle: identification, rationalization, implementation, maintenance and change management. It requires a documented alarm philosophy and sets requirements for system design, alarm prioritization, performance monitoring and Human-Machine Interface (HMI) design.
ISA ISA-TR88.00.02ISA-TR88.00.02PackML is a standard designated ISA-TR88.00.02, developed by OMAC and adopted by ISA. It defines a common look and feel and consistent machine behaviors for PackML-enabled machines, including machines from different manufacturers and control systems. Its stated goals include easier transfer and retrieval of consistent machine data and a common look and feel across a plant floor.
ISA-88 Batch controlISA-88ISA-88 is a series of batch process control standards. It defines models, terminology, data structures, recipe models and batch production records for batch manufacturing systems. The standards are technology-agnostic and apply to industries that use batch processing.
NIST SP 800-82 Guide to Operational Technology (OT) SecurityNIST SP 800-82This document is a NIST special publication that gives guidance on securing operational technology (OT) while addressing performance, reliability, and safety requirements. It defines OT as programmable systems and devices that interact with the physical environment, including industrial control systems, building automation, transportation, physical access control, and environmental monitoring and measurement systems. It covers OT overview and typical system topologies, identifies common threats and vulnerabilities, and provides recommended security countermeasures.
OSHA 29 CFR 1910.147 Control of hazardous energy (lockout/tagout)29 CFR 1910.147This OSHA regulation establishes minimum performance requirements for controlling hazardous energy during the servicing and maintenance of machines and equipment. It requires employers to establish energy control procedures, train employees, conduct periodic inspections, and use lockout or tagout to prevent unexpected energization, startup, or release of stored energy that could injure employees.
UL 508A Industrial Control PanelsUL 508AUL 508A is a UL Standard titled Industrial Control Panels. The document lists it as ACTIVE, with a published date of April 24, 2018, a last revision date of June 26, 2025, and ANSI approval on June 26, 2025.