- Brother M200Xd1M200Xd1The Brother M200Xd1 is a compact machine that combines turning and milling on a tilting rotary table with a turning spindle. It allows complex machining and multi-face machining after one-time chucking, and uses a 28-tool magazine (22-tool optional).
- Brother M200Xd1-5AXM200Xd1-5AXThe Brother M200Xd1-5AX is a five-axis machining center with a tilting rotary table and a turning spindle. It combines turning and milling operations in one setup, with X/Y/Z travels of 200/440/305 mm. It uses a 10,000 min-1 milling spindle and a 2,000 min-1 turning spindle.
- Brother M300Xd1M300Xd1The Brother M300Xd1 is a CNC machining center with a tilting rotary table and a turning spindle. It performs turning, milling, and multi-face machining with five controlled axes and a 28-tool magazine. It uses the CNC-D00 control and is intended for relatively large parts.
- Brother M300Xd1-5AXM300Xd1-5AXBrother SPEEDIO M300Xd1-5AX is a 5-axis CNC machining center with a tilting rotary table and a turning spindle. It performs milling and turning operations in one setup, with travels of 300 mm (X), 440 mm (Y) and 380 mm (Z). It has a 10,000 min-1 milling spindle, a 28-tool magazine and simultaneous five-axis control for multi-face machining.
- Brother M300Xd2-5AXM300Xd2-5AXThe Brother M300Xd2-5AX is a multi-tasking CNC machine that combines milling and turning on a tilting rotary table. It has five control axes (X, Y, Z, A and C), 300 x 440 x 380 mm linear travels, a standard 12,000 min-1 spindle and simultaneous 5-axis machining capability. It uses the CNC-D00v (DB) control and lists OPC UA communication.
- Brother M300Xd2-5AX/64TM300Xd2-5AX/64TThe Brother M300Xd2-5AX/64T is a 5-axis CNC multitasking machine that combines milling and turning on a tilting rotary table. It has X/Y/Z travels of 300/440/380 mm, a 64-tool magazine, and a standard 12,000 min-1 spindle. The machine is designed for parts that require turning and milling operations on one machine.
- Brother M300Xd2-64TM300Xd2-64TThe Brother M300Xd2-64T is a multi-tasking CNC machine that combines milling and turning on a tilting rotary table. It has 300 mm X, 440 mm Y and 380 mm Z travels, a standard 12,000 min-1 spindle and a 64-tool magazine made of a 21-tool turret plus a 43-tool stocker. It is intended for mass-production parts that require turning and milling in one chucking.
- CHIRON FZ 08 mill turn precision+FZ 08 mill turn precision+The FZ 08 mill turn precision+ is a mill-turn machine from the CHIRON 08 Series precision+ line that combines a swivelling milling spindle with a main and a counter turning spindle for multi-functional machining from bar stock. The milling spindle runs from 30,000 to 54,000 rpm and swivels from -10° to +100°. Travels are 210 x 200 x 360 mm.
- Chiron MT 715MT 715The MT 715 is a 5-axis mill-turn machining centre from the Chiron 715 Series. It performs milling and turning operations in any sequence on six sides of a workpiece, using a swivelling milling spindle with an HSK-T63 taper and a main spindle plus an opposing counter spindle. An optional second machining unit and an integrated tool store with automation allow bar stock or chucked parts to be loaded and unloaded while the machine is running.
- DMG MORI CTX 750CTX 750The DMG MORI CTX 750 is a universal turning machine for workpieces up to 700 mm diameter. It provides X-, Y- and Z-axis strokes, a 127 mm bar capacity, and turret options for milling. Control alternatives listed are SIEMENS and Fanuc.
- DMG MORI CTX beta 1250 TC 4ACTX beta 1250 TC 4AThe CTX beta 1250 TC 4A is a DMG MORI turn-mill machine that combines turning with milling using a compactMASTER turn-mill spindle and a second tool carrier. Its linear strokes are 490 mm in X, 200 mm in Y and 1,200 mm in Z, and it accepts workpieces up to 340 mm diameter and 1,185 mm long, with 102 mm bar capacity. The B-axis swivels ±110° so tools can approach the workpiece at an angle.
- DMG MORI CTX beta 450 TCCTX beta 450 TCThe CTX beta 450 TC is a turn-mill machine that combines turning, milling and grinding on one machine base, with a left and a right spindle for complete machining of a workpiece in up to six sides. Its compactMASTER turning and milling spindle runs at 15,000 rpm as standard and the machine accepts bar stock up to 102 mm diameter and workpieces up to ø500 x 1,100 mm. Axis travels are 750 mm in X, 250 mm in Y and 1,100 mm in Z, with rapid traverse rates up to 50 m/min.
- DMG MORI CTX gamma 2000 TCCTX gamma 2000 TCThe CTX gamma 2000 TC is a turn and mill machine built for 6-sided complete machining of a workpiece in one setup. It accepts workpieces up to 700 mm in diameter and 2000 mm in length, with a maximum bar capacity diameter of 127 mm. Its linear axes travel up to 800 mm in X, 420 mm in Y and 2050 mm in Z.
- DMG MORI CTX gamma 3000 TCCTX gamma 3000 TCThe CTX gamma 3000 TC is a turn-mill machine that combines turning with milling to machine workpieces on six sides in one setup. It accepts workpieces up to 700 mm in diameter and 3000 mm in length, with a bar capacity of 127 mm. Axis strokes are 800 mm in X, 420 mm in Y and 3050 mm in Z, and the compactMASTER milling spindle runs at up to 12,000 rpm with 36 kW and 220 Nm.
- DMG MORI DMC 160 U (FD) duoBLOCKDMC 160 U (FD) duoBLOCKThe DMC 160 U (FD) duoBLOCK is a DMG MORI machine that performs milling and turning in one setup. It has 1,600 mm X-axis and Y-axis strokes and a 1,100 mm Z-axis stroke. The DirectDrive table rotates up to 400 rpm, and the machine accepts workpieces up to 1,600 mm diameter and 1,350 mm height.
- DMG MORI DMC 270 U (FD)DMC 270 U (FD)The DMC 270 U (FD) is a DMG MORI portal (gantry) machining centre from the DECKEL MAHO portal series that performs milling and turning in one setup on a DirectDrive rotary table. Its linear axis strokes are 2,700 mm in X, 2,700 mm in Y and 1,600 mm in Z, and it accepts workpieces up to 3,400 mm diameter. The FD type is the mill/turn version, with a reduced maximum workpiece weight of 6,000 kg compared with 9,000 kg for the standard machine.
- DMG MORI DMU 125 P (FD) duoBLOCKDMU 125 P (FD) duoBLOCKThe DMG MORI DMU 125 P (FD) duoBLOCK is a machining center that performs milling and turning in one setup. It has X-, Y-, and Z-axis strokes of 1,250 mm, 1,250 mm, and 1,000 mm, a DirectDrive table with rotational speeds up to 500 rpm, and a wheel magazine with 453 tool pockets. Control and software alternatives are SIEMENS and HEIDENHAIN.
- DMG MORI DMU 160 P (FD) duoBLOCKDMU 160 P (FD) duoBLOCKThe DMU 160 P (FD) duoBLOCK is a DMG MORI machine for complete machining, combining milling and turning in one setup. It has 1,600 mm travels in X and Y, 1,100 mm in Z, and a 453-pocket wheel magazine. A DirectDrive table rotates up to 400 rpm.
- DMG MORI DMU 270 P (FD)DMU 270 P (FD)The DMU 270 P (FD) is a DECKEL MAHO portal (gantry) machining centre that performs milling and turning in one setup on a DirectDrive rotary table. It has 2,700 mm of X and Y stroke and 1,600 mm of Z stroke, and accepts workpieces up to 3,400 mm diameter. The machine uses a gantry design with a vertically moving cross beam, hydraulic weight compensation and a three-point support bed that requires no foundation.
- DMG MORI DMU 65 H (FD) monoBLOCK 2nd GenerationDMU 65 H (FD) monoBLOCK 2nd GenerationThe DMU 65 H (FD) monoBLOCK 2nd Generation is a 5-axis machining center with a swiveling rotary table supported on both sides. It performs milling, turning, grinding, measuring and gear cutting in one machine. Its X/Y/Z strokes are 650 mm, 950 mm and 700 mm, and it accepts workpieces up to 840 mm diameter, 770 mm height and 600 kg.
- DMG MORI NT 4250 DCGNT 4250 DCGThe DMG MORI NT 4250 DCG is a machine for simultaneous 5-axis machining with a B axis driven by a direct drive motor. It has X, Y and Z travels of 750 mm, 420 mm and 1,650 mm, and accepts workpieces up to 660 mm diameter and 1,542 mm length. The document lists a MAPPS Fanuc control and standard digital tailstock with a movable swivel operation panel.
- DMG MORI NT 4300 DCGNT 4300 DCGThe NT 4300 DCG is a DMG MORI turning and milling machine that carries a B axis with a direct drive motor for simultaneous 5-axis machining of complex parts. It accepts workpieces up to 660 mm in diameter and 1498 mm in length, with a maximum bar capacity of 90 mm. Axis strokes are 750 mm in X, 420 mm in Y and 1650 mm in Z.
- DMG MORI NT 5400 DCGNT 5400 DCGThe DMG MORI NT 5400 DCG is a multitasking machine for simultaneous 5-axis machining of complex parts. It has a direct-drive B axis with ±120° rotation, a digital tailstock, and X/Y/Z strokes of 1,040/510/2,140 mm. It accepts workpieces up to 920 mm diameter and 1,921 mm length, with 103 mm bar capacity.
- DMG MORI NT 6600 DCGNT 6600 DCGThe DMG MORI NT 6600 DCG is an integrated mill turn center intended for long, large-diameter workpieces. It handles workpieces up to 1,070 mm in diameter and 6,076 mm in length, with a 164 mm maximum bar capacity diameter. Its linear axis travels are 1,040 mm in X, 660 mm in Y, and 6,150 mm in Z.
- DMG MORI NTX 1000NTX 1000The NTX 1000 is a DMG MORI turning/milling machine that performs simultaneous 5-axis machining of complex parts. Its B axis is driven by a direct drive motor and carries a Capto C5 tool spindle with a standard maximum speed of 12,000 min-1. It accepts workpieces up to 430 mm diameter and 800 mm length, with a 65 mm bar capacity.
- DMG MORI NTX 2000NTX 2000The NTX 2000 is a DMG MORI turning and milling machine with two spindles and a B-axis that uses a direct drive motor for simultaneous 5-axis machining. It accepts workpieces up to 670 mm in diameter and 1,538 mm in length, and bar stock up to 65 mm in diameter. Linear strokes are 675 mm in X, 300 mm in Y and 1,562 mm in Z.
- DMG MORI NTX 2500NTX 2500The DMG MORI NTX 2500 is a turn-mill machine for 6-sided machining with a Turn & Mill Spindle compactMASTER. It has a maximum workpiece diameter of 670 mm and a maximum bar capacity diameter of 80 mm, with X-axis and Y-axis strokes of 675 mm and 300 mm. Technical data is listed for Type 1500 and Type 3000 Z-axis configurations, with maximum workpiece lengths of 1,530 mm and 3,135 mm respectively.
- DMG MORI NTX 500NTX 500The DMG MORI NTX 500 is a turn-mill CNC machine with a compactMASTER turn and mill spindle. It has X/Y/Z strokes of 375 mm, 150 mm and 610 mm, and accepts workpieces up to 350 mm diameter and 580 mm long with bar capacity up to 65 mm. It performs six-sided complete machining using main and sub spindles and a lower turret.
- DMG MORI NZ DUENZ DUEThe NZ DUE is a production turning machine from the DMG MORI NZ Series with two turrets, each carrying an 80 mm Y-axis, and up to two B-axes. Turrets can be freely positioned on stations T1 to T4, and the B-axis swivels from -10° to +100°, which allows five-axis simultaneous operation with standard tools. Main and counter spindles are turnMASTER units rated up to 7,000 rpm, and an optional TWIN spindle arrangement provides two independent work areas for six-sided complete machining.
- DMG MORI NZ DUE FORMULANZ DUE FORMULAThe NZ DUE FORMULA is a DMG MORI turning machine with two turrets, each carrying an 80 mm Y-axis, plus a milling spindle. It accepts bar stock up to 72 mm diameter and workpieces up to 740 mm long, with 210 mm X-axis, 80 mm Y-axis and 740 mm Z-axis strokes. Main and counter spindles are turnMASTER units running up to 5,000 min-1.
- DMG MORI NZ QUATTRONZ QUATTROThe NZ QUATTRO is a DMG MORI turning machine with four turrets, each carrying an 80 mm Y-axis and optionally a B-axis. It machines bar stock up to 72 mm diameter and workpieces up to 1,290 mm long, with axis strokes of 210 mm in X, 80 mm in Y and 1,290 mm in Z. Each turret can be fitted with a B-axis for 5-axis simultaneous operation, and a TWIN spindle option provides two independent work areas for 6-sided complete machining.
- DMG MORI NZ TRENZ TREThe NZ TRE is a turning machine with three turrets that can be positioned freely on the T1 to T4 stations. Each turret carries an 80 mm Y-axis, and up to three B-axes with a -10° to +100° swivel range can be fitted. Turrets with built-in milling motors allow turning, milling and 5-axis simultaneous operation on bar stock up to 72 mm diameter and workpieces up to 1,290 mm long.
- DMG MORI ULTRASONIC 60 eVo linear 2nd GenerationULTRASONIC 60 eVo linear 2nd GenerationThe ULTRASONIC 60 eVo linear 2nd Generation is a universal machining centre that combines 5-axis simultaneous milling with mill-turn operation. It superimposes an ultrasonic oscillation of up to 15 µm on the rotating tool through an HSK-A63 interface, which lowers process forces and is intended for machining advanced materials. A swivel rotary table with a B-axis from -5° to +110° and a C-axis reaching 1,200 rpm provide the rotary motions.
- DN Solutions PUMA TL2500XLMPUMA TL2500XLMThe DN Solutions PUMA TL2500XLM is a horizontal turning center with upper and lower turrets for simultaneous 4-axis machining. It is intended for shaft work such as camshafts and crankshafts. It has a 10-inch chuck, a maximum turning length of 1250 mm, a 4000 r/min spindle and 26 kW spindle power.
- DN Solutions SMX 2100STSMX 2100STThe DN Solutions SMX 2100ST is a multitasking turning center with two spindles and a B-axis milling function. It has an 8-inch chuck, a maximum turning diameter of 600 mm and a maximum turning length of 1040 mm. Both left and right spindles reach 5000 r/min with 22 kW of power.
- DN Solutions SMX 5100LBSMX 5100LBThe SMX 5100LB is a multitasking mill-turn turning centre in DN Solutions' SMX series, listed with a 21-inch chuck. It turns parts up to 830 mm in diameter and 3050 mm in length, using a left spindle rated at 1500 r/min, 37 kW and 4200 N·m. The SMX series combines left and right spindles, a B-axis milling function and a lower turret for complex machining.
- DN Solutions SMX2100SMX2100The DN Solutions SMX2100 is a multitasking mill-turn turning centre listed in the SMX series. It has an 8 inch chuck, a maximum turning diameter of 600 mm and a maximum turning length of 1040 mm. Its left spindle runs up to 5000 r/min with 22 kW and 467 N·m of torque, and the machine weighs 14,900 kg.
- DN Solutions SMX2100BSMX2100BThe DN Solutions SMX2100B is a multi-axis mill-turn machine in the SMX series, fitted with a 10 inch chuck on the left spindle. It turns parts up to 600 mm in diameter and 1040 mm in length, and combines left and right spindle work with B-axis milling and a lower turret for complex parts in one setup. Its 12-station servo turret and B-axis/C-axis control allow turning and milling operations without re-clamping.
- DN Solutions SMX2100SSMX2100SThe DN Solutions SMX2100S is a two-spindle mill-turn CNC machine in the SMX series. It has an 8-inch chuck, a maximum turning diameter of 600 mm and a maximum turning length of 1040 mm. Both left and right spindles are rated at 5000 rpm and 22 kW.
- DN Solutions SMX2100SBSMX2100SBThe SMX2100SB is a multitasking mill-turn turning centre in the DN Solutions SMX series. It combines left and right spindles with a B-axis milling function and a lower turret to machine complex parts in a single setup. It has a 10 inch chuck, a maximum turning diameter of 600 mm and a maximum turning length of 1040 mm.
- DN Solutions SMX2100STBSMX2100STBThe SMX2100STB is a multi-axis mill-turn machine in the DN Solutions SMX series, combining a left and a right spindle with B-axis milling and a lower turret so a part can be turned and milled in one setup. It takes a 10 inch chuck, turns up to 600 mm in diameter and 1040 mm in length, and weighs 15900 kg. Both spindles are rated 22 kW, the left at 4000 r/min and 512 N·m and the right at 5000 r/min and 467 N·m.
- DN Solutions SMX2600SMX2600The DN Solutions SMX2600 is a multitasking turning centre in the SMX series, fitted with a 10-inch chuck. It turns workpieces up to 660 mm in diameter and 1540 mm in length, and its left spindle reaches 4000 r/min with 30 kW and 724 N·m. The SMX series combines left and right spindles, B-axis milling and a lower turret for multi-axis mill-turn work.
- DN Solutions SMX2600SSMX2600SThe DN Solutions SMX2600S is a multi-axis mill-turn machine with left and right spindles, a B-axis milling function, and a lower turret. It has a 10-inch chuck, a maximum turning diameter of 660 mm, and a maximum turning length of 1540 mm. It performs multi-task machining of complex parts.
- DN Solutions SMX2600STSMX2600STThe DN Solutions SMX2600ST is a mill-turn turning center in the SMX series with two opposed spindles, a 10-inch chuck on each, and a B-axis milling function plus a lower turret. It machines parts up to 660 mm in turning diameter and 1540 mm in turning length, with a left spindle rated 4000 r/min and 30 kW. It is intended for complex parts that combine turning and milling in one setup.
- DN Solutions SMX3100SMX3100The DN Solutions SMX3100 is a multitasking turning center in the SMX series. It has a 12-inch chuck, a maximum turning diameter of 660 mm and a maximum turning length of 1540 mm. The left spindle runs up to 3000 r/min at 30 kW, and series features include B-axis milling and a lower turret for complex machining.
- DN Solutions SMX3100LSMX3100LThe DN Solutions SMX3100L is a multi-axis mill-turn turning centre fitted with a 12-inch chuck. It machines parts up to 660 mm in diameter and 2540 mm in length, with a left spindle rated at 3000 r/min and 30 kW. A B-axis milling function and a servo turret allow turning and milling operations on the same machine.
- DN Solutions SMX3100LSSMX3100LSThe DN Solutions SMX3100LS is a multi-axis mill-turn CNC turning center in the SMX series. It has left and right spindles, a B-axis milling function, and a lower turret, with a 12-inch chuck, 660 mm maximum turning diameter, and 2540 mm maximum turning length.
- DN Solutions SMX3100SSMX3100SThe DN Solutions SMX3100S is a multi-axis mill-turn machine from the SMX series. It has a 12-inch chuck, a maximum turning diameter of 660 mm and a maximum turning length of 1540 mm. The left spindle reaches 3000 r/min at 30 kW and 1203 N·m; the right spindle reaches 4000 r/min at 30 kW and 724 N·m.
- DN Solutions SMX3100STSMX3100STThe DN Solutions SMX3100ST is a multi-axis mill-turn machine in the SMX series. It combines left and right spindles with B-axis milling and a lower turret for complex turning and milling work. It has a 12-inch chuck, a maximum turning diameter of 660 mm, and a maximum turning length of 1540 mm.
- DN Solutions SMX5100LSMX5100LThe DN Solutions SMX5100L is a multi-axis mill-turn machine in the SMX series. The specification table lists a 15-inch chuck, an 830 mm maximum turning diameter, a 3050 mm maximum turning length, and a left spindle rated at 2400 r/min and 37 kW. The SMX series is described as using combined turning and milling functions for complex machining.
- DN Solutions SMX5100LSSMX5100LSThe SMX5100LS is a multi-axis mill-turn turning center with two spindles and a 15 inch chuck. It turns parts up to 830 mm in diameter and 3050 mm in length, with each spindle rated at 2400 r/min and 37 kW. The machine combines left and right spindles, a B-axis milling function and a lower turret for machining complex parts in one setup.
- DN Solutions SMX5100LSBSMX5100LSBThe DN Solutions SMX5100LSB is a multi-axis mill-turn machine in the SMX series, with a 21 inch chuck on both the left and right spindles. It turns parts up to 830 mm in diameter and 3050 mm in length. Each spindle runs to 1500 r/min with 37 kW of power and 4200 N·m of torque.
- DN Solutions SMX5100XLSMX5100XLThe SMX5100XL is a multi-axis mill-turn machine in the DN Solutions SMX series, combining turning with B-axis milling capability. It has a 15 inch chuck, a maximum turning diameter of 830 mm and a maximum turning length of 4070 mm, with a left spindle rated at 2400 r/min and 37 kW. The series uses left and right spindles, a B-axis milling function and a lower turret for complex, high-precision machining.
- DN Solutions SMX5100XLBSMX5100XLBThe SMX5100XLB is a multi-axis mill-turn machine in the DN Solutions SMX series, listed with a 21-inch chuck, a maximum turning diameter of 830 mm and a maximum turning length of 4070 mm. Its left spindle runs up to 1500 r/min and is rated 37 kW with 4200 N·m of torque. The machine weighs 39000 kg.
- GROB G350TG350TThe GROB G350T is a 5-axis universal mill-turn machining center with three linear axes and two rotary axes. It supports 5-sided machining, 5-axis simultaneous interpolation and GROB TRAORI turning, and its horizontal spindle and tunnel work area allow long tools to be swiveled and machined without collision. It is intended for machining smaller parts in one setup.
- GROB G750TG750TThe GROB G750T is a 5-axis mill-turn machining center with three linear and two rotary axes for 5-sided and simultaneous 5-axis machining. It has X/Y/Z travels of 1,000/1,100/1,175 mm and a horizontal spindle. The machine uses a mill-turn table and a disk-type tool magazine.
- INDEX G160G160The INDEX G160 is a turn-mill center for small workpieces. It has two identical work spindles, three tool carriers, and a motor milling spindle with Y/B kinematics. The work area accepts turning lengths up to 760 mm.
- INDEX G200.2G200.2The INDEX G200.2 is a turn-mill center for complete machining of bar stock and chucked parts. It has a main spindle and counter spindle, up to three tool carriers, and a 360° B-axis milling spindle with HSK-A40 tooling. It uses a Siemens S840D sl control with an 18.5-inch multi-touch screen.
- INDEX G320G320The INDEX G320 is a turn-mill center for medium-sized workpieces, with a 1,400 mm turning length and 102 mm bar capacity. It uses HSK-T63 or Capto-C6 tooling on a motor milling spindle and has a B axis for 5-axis milling. The main spindle runs at up to 4,000 rpm and the milling spindle at up to 12,000 rpm.
- INDEX G400G400The INDEX G400 is a turn-mill center for complete turning and milling of large workpieces. It has main and counter spindles, a 400 mm chuck, bar capacity up to 120 mm, and a working area that can take up to three tool carriers with Y axes. The control is an iXpanel iX4.0 based on Siemens SINUMERIK 840D sl.
- INDEX G420G420The INDEX G420 is a turn-mill center for complete turning and milling of large workpieces. It has main and counter spindles, a 400 mm chuck, bar capacity up to 120 mm, and a working area that can take up to three tool carriers with Y axes. The document lists tool stock up to 139 tools for the G420 and an iXpanel iX4.0 control based on Siemens SINUMERIK 840D sl.
- INDEX G500G500The INDEX G500 is a turn-mill center for complete turning and milling of large workpieces. It uses a VDI-40 tooling system and supports bar diameters up to 120 mm and chucked parts up to 500 mm diameter. Its linear axes rapid traverse at up to 50 m/min.
- INDEX-TRAUB TRAUB TNX160TRAUB TNX160The TRAUB TNX160 is a turn-mill center for machining small, complex workpieces. It has two identical work spindles, three tool carriers, and a motor milling spindle with Y/B kinematics. It handles workpieces up to 760 mm long and has rapid traverse rates up to 60 m/min.