What is the maximum spindle speed of the DMG MORI CTX gamma 3000 TC?

12000 rpm, per CTX gamma 3000 TC - Turn & Mill Machines - DMG MORI (en.dmgmori.com).

What is the X-axis travel of the DMG MORI CTX gamma 3000 TC?

800 mm, per CTX gamma 3000 TC - Turn & Mill Machines - DMG MORI (en.dmgmori.com).

DMG MORI CTX gamma 3000 TC

The CTX gamma 3000 TC is a turn-mill machine that combines turning with milling to machine workpieces on six sides in one setup. It accepts workpieces up to 700 mm in diameter and 3000 mm in length, with a bar capacity of 127 mm. Axis strokes are 800 mm in X, 420 mm in Y and 3050 mm in Z, and the compactMASTER milling spindle runs at up to 12,000 rpm with 36 kW and 220 Nm.

Source checked10/10 values · 2026-10-25DMG MORI CNC multitasking

Travel X

800mm

Travel Y

420mm

Travel Z

3,050mm

Spindle max

12,000rpm

Spindle power

36kW

Specification

1 source

Category	cnc multitasking
Tool capacity	36
Max turning diameter	700 mm
Max turning length	3,000 mm
Bar capacity	127 mm

Quick answers

What is the maximum spindle speed of the DMG MORI CTX gamma 3000 TC?: 12000 rpm, per CTX gamma 3000 TC - Turn & Mill Machines - DMG MORI (en.dmgmori.com).
What is the X-axis travel of the DMG MORI CTX gamma 3000 TC?: 800 mm, per CTX gamma 3000 TC - Turn & Mill Machines - DMG MORI (en.dmgmori.com).

Study notes

Machine is described as a turn & mill machine for 6-sided complete machining.
Main spindle torque is 4,000 Nm; an optional counter spindle provides up to 2,200 Nm.
Material removal rate stated as ISM 102 to 1,584 cm3/min in CK45.
Integrated C-axis resolution is 0.001 degrees.
compactMASTER turn-mill spindle: 12,000 rpm, 36 kW, 220 Nm; a high-speed version is available at 20,000 rpm.
Tool magazine: 36-position disc magazine as standard, optional chain magazine with up to 180 stations.
Optional second tool carrier options: VDI 40 turret (4,000 rpm, 28 Nm, 10 kW) or VDI 40 Direct Drive turret (10,000 rpm, 34 Nm, 14.2 kW).
TRIFIX precision quick-change interface is standard, quoted at under 30 seconds tool set-up time and under 6 micrometre repeatability.
Direct measuring systems from Magnescale are used in all axes; X/Y/Z axis motors and turret drives are cooled.
A maintenance-free linear drive is used in the Z-axis, quoted with a 5-year warranty.
Control and software alternatives are listed only as SIEMENS; no further control details are given.