Machine Schema
Connect MCP

DMG MORI NT 4250 DCG

The DMG MORI NT 4250 DCG is a machine for simultaneous 5-axis machining with a B axis driven by a direct drive motor. It has X, Y and Z travels of 750 mm, 420 mm and 1,650 mm, and accepts workpieces up to 660 mm diameter and 1,542 mm length. The document lists a MAPPS Fanuc control and standard digital tailstock with a movable swivel operation panel.

Source checked11/11 values · 2026-10-25DMG MORICNC multitasking
X 750Y 420Z 1,650ALL DIMENSIONS mmNT 4250 DCG · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
750mm
Travel Y
420mm
Travel Z
1,650mm
Axes
5

Specification

1 source
Categorycnc multitasking
Max turning diameter660 mm
Max turning length1,542 mm
Bar capacity80 mm

Joints

NameRange min (°)Range max (°)
B-120120

Quick answers

How many axes does the DMG MORI NT 4250 DCG have?
5, per NT 4250 DCG - Turn & Mill Machines - DMG MORI (en.dmgmori.com).
What is the X-axis travel of the DMG MORI NT 4250 DCG?
750 mm, per NT 4250 DCG - Turn & Mill Machines - DMG MORI (en.dmgmori.com).

Study notes

  • Simultaneous 5-axis machining is supported by a direct drive motor (DDM) installed in the B axis.
  • The machine uses the NT series Box in Box structure and Driven at the Center of Gravity.
  • The tool spindle uses a 2-face contact Capto specification.
  • ORC (Octagonal Ram Construction) is used for heat control.
  • The digital tailstock is equipped as standard.
  • The operation panel is movable and swivels for setups.
  • Power-saving setting and reduction in lubricating oil consumption are provided.
  • The document lists 'MAPPS Fanuc' under control and software alternatives; this does not match a listed controller id.
↑↓ navigate↵ openesc close