Machine Schema
Connect MCP

DMG MORI NZ DUE

The NZ DUE is a production turning machine from the DMG MORI NZ Series with two turrets, each carrying an 80 mm Y-axis, and up to two B-axes. Turrets can be freely positioned on stations T1 to T4, and the B-axis swivels from -10° to +100°, which allows five-axis simultaneous operation with standard tools. Main and counter spindles are turnMASTER units rated up to 7,000 rpm, and an optional TWIN spindle arrangement provides two independent work areas for six-sided complete machining.

Source checked6/6 values · 2026-10-25DMG MORICNC multitasking
X 210Y 80Z 1,290SPINDLE 7,000 rpmALL DIMENSIONS mmNZ DUE · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
210mm
Travel Y
80mm
Travel Z
1,290mm
Spindle max
7,000rpm

Specification

1 source
Categorycnc multitasking
Bar capacity72 mm

Quick answers

What is the maximum spindle speed of the DMG MORI NZ DUE?
7000 rpm, per NZ DUE - Horizontal Production Turning Machines and Lathes - DMG MORI (en.dmgmori.com).
What is the X-axis travel of the DMG MORI NZ DUE?
210 mm, per NZ DUE - Horizontal Production Turning Machines and Lathes - DMG MORI (en.dmgmori.com).

Study notes

  • Two turrets, each with an 80 mm Y-axis (3 in.), and up to two B-axes; turrets are freely positioned on T1 to T4.
  • B-axis swivel range is -10° to +100°; it permits five-axis simultaneous operation and the use of standard tools instead of special angle tools.
  • Milling turret has a built-in motor rated at 12,000 rpm, up to 24 Nm and 16 kW.
  • Turret stations: 12 for VDI 30 and BMT 40, or 16 for VDI 25 and BMT 45.
  • turnMASTER main and counter spindle run up to 7,000 rpm (5,000 rpm as standard) with 174 Nm at 100% duty cycle.
  • TWIN spindle (TS) option gives two independent work areas for six-sided complete machining: turning up to 4,000 rpm and 60 Nm, SWISSTYPE function with rotating guide bush up to 5,000 rpm, and steady rest function.
  • Maximum workpiece length is 1,290 mm (51 in.).
  • Control and software alternatives listed in the document are SIEMENS and MAPPS; no controller entry is available for these.
  • Documented cutting example: 8 mm radial depth of cut at all four turret positions in CK 45, with 65 mm cutting diameter, 270 m/min cutting speed and 750 cm3/min metal removal rate.
  • Document states a 36-month warranty with unlimited spindle hours.
↑↓ navigate↵ openesc close