Nachi Robotics Industrial robot

Robots, CNC machines and PLCs: payload, reach, travels, joint limits

46 entries

Nachi LP130FLP130FThe Nachi LP130F is a four-axis articulated palletizing robot with a 130 kg payload and a 3210 mm maximum reach. It uses an AC servo drive system and is mounted on the floor. The robot is intended for palletizing boxes, bags, crates, cases, and other goods.
Nachi LP180-01LP180-01The Nachi LP180-01 is a four-axis articulated robot for palletizing, driven by AC servos and mounted on the floor. It has a 180 kg wrist payload, a 3210 mm maximum reach, and a 1150 kg robot mass. The document states throughput of up to 1800 palletizing cycles per hour at 60 kg or 1500 cycles per hour at 130 kg, with software for palletizing routines and path optimization.
Nachi MC500PMC500PThe MC500P is a five-axis articulated robot built for heavy layer-palletizing and material-handling work, with a 500 kg wrist payload and a 3756 mm maximum motion range so one unit can serve several pallets at once. It is driven by AC servo motors, mounts on the floor, and holds position repeatability of ±0.09 mm. The robot is intended for heavy industrial products such as car bodies, engines, foundry components and concrete slabs.
Nachi MZ07LMZ07LThe Nachi MZ07L is a 6-axis articulated industrial robot in the MZ07 series. The document lists a 7 kg wrist payload, 912 mm maximum reach, and ±0.02 mm position repeatability. It is IP67 equivalent and supports floor, wall, angle, and ceiling mounting.
Nachi MZ12-01MZ12-01The MZ12-01 is a six-axis articulated industrial robot from Nachi with a 12 kg payload and a 1454 mm maximum reach. It uses AC servo drives and has a point-to-point repeatability of ±0.04 mm. The arm is IP67 compliant and can be mounted on the floor, tilted, or inverted/ceiling for machine tending, material handling, palletizing and dispensing work.
Nachi MZ35FMZ35FThe Nachi MZ35F is a six-axis articulated industrial robot driven by AC servo motors, intended for machine tending, material handling, palletizing and dispensing. It has a 35 kg wrist payload and a 2102 mm maximum reach, with a hollow wrist that allows cables to be routed inside the arm. The body is rated IP67 equivalent and is supplied with anti-corrosion treatment and anti-coolant coating for wet or dirty work areas.
Nachi MZ50FMZ50FThe Nachi MZ50F is a six-axis articulated industrial robot with a hollow wrist for internal cable routing. It is intended for machine tending, material handling, palletizing, and dispensing, and is rated IP67 equivalent for harsh environments. Its position repeatability is ±0.06 mm, with a stated payload of 50 kg and reach of 2102 mm.
Nachi MZ70FMZ70FThe Nachi MZ70F is a six-axis articulated industrial robot with a 70 kg payload and 2,102 mm maximum reach. It is intended for machine tending, material handling, palletizing, and dispensing. The robot has a hollow wrist for internal cable routing, IP67-equivalent protection, and a repeatability of ±0.06 mm.
Nachi NB04LNB04LThe Nachi NB04L is a six-axis vertical articulated robot intended for arc welding, with a 4 kg payload, a 2008 mm reach and 277 kg mass. The welding cable runs coaxially through the arm in an enclosed cable design, which the document states improves wire feeding and prevents snags. It can be mounted on the floor, wall or ceiling, and positional repeatability is ±0.08 mm at the tool centre point.
Nachi Robotics LP210-01LP210-01The Nachi Robotics LP210-01 is a four-axis articulated palletizing robot with a 210 kg wrist payload and 3210 mm maximum reach. It is floor-mounted, uses an AC servo drive system, and has a 1150 kg robot mass. The LP series includes palletizing software for teaching stacking routines and generating program paths.
Nachi Robotics MC20MC20The Nachi MC20 is a six-axis articulated industrial robot. It has a 20 kg payload, a 1722 mm horizontal reach, and a position repeatability of ±0.05 mm. The arm is IP65 rated and can be mounted on the floor or ceiling.
Nachi Robotics MC280LMC280LThe MC280L is a six-axis articulated industrial robot from Nachi Robotics for heavy lifting and extended-reach tasks. It has a 280 kg payload and a 3101 mm maximum reach, with ±0.2 mm position repeatability. It is listed for machine tending, material handling, palletizing, and spot welding, and mounts on the floor.
Nachi Robotics MC350MC350The MC350 is an industrial robot designed for heavy and repetitive lifting tasks with a payload capacity of 350 kg. It provides a 2771 mm working envelope, allowing work on several products or machines at once. It is intended for large-scale lifting operations such as car bodies, engines, and foundry components.
Nachi Robotics MC400LMC400LThe Nachi MC400L is a six-axis articulated industrial robot with a 400 kg wrist payload and a 3756 mm reach. It is floor-mounted and has a position repeatability of ±0.3 mm. It is used for machine tending, material handling, palletizing, and spot welding.
Nachi Robotics MC470PMC470PThe MC470P is a six-axis articulated industrial robot from Nachi Robotics. It has a 470 kg payload and a 2,771 mm maximum reach, with ±0.2 mm position repeatability. It is floor-mounted and intended for material handling and palletizing.
Nachi Robotics MC600MC600The Nachi MC600 is a floor-mounted articulated robot with six axes. It is intended for lifting, transferring, and handling large industrial parts, with a 2,890 mm working envelope and ±0.3 mm position repeatability. Listed applications include machine tending, material handling, and spot welding.
Nachi Robotics MR20MR20The MR20 is a seven-axis articulated robot for machine tending and material handling. It has a 20 kg payload and 1260 mm reach, with repeatability of ±0.06 mm. It supports floor and invert/ceiling mounting.
Nachi Robotics MR35MR35The MR35 is a seven-axis industrial robot with a 35 kg payload and 2050 mm reach. It repeats to ±0.07 mm and has an IP67 rating for harsh manufacturing environments. It is intended for machine tending and material handling and can be mounted on the floor, wall, or ceiling/inverted.
Nachi Robotics MR50MR50The MR50 is a 7-axis industrial robot from Nachi Robotics with a 50 kg payload and 2050 mm reach. It is intended for machine tending and material handling, and its IP67 rating supports use in harsh manufacturing environments. The robot can be mounted on the floor, wall, angled surfaces, or inverted ceiling.
Nachi Robotics MZ01MZ01The Nachi MZ01 is a 6-axis articulated industrial robot with a 350 mm maximum reach and a 1 kg rated payload. It weighs 10 kg and has ±0.02 mm position repeatability. The specifications identify robot type MZ01-02 and list assembly, dispensing, machine tending, material handling and palletizing applications.
Nachi Robotics MZ03EL-02MZ03EL-02The MZ03EL-02 is a six-axis articulated robot arm driven by AC servo motors, with a 1102 mm maximum reach and a 3.5 kg wrist payload. It is built with through-arm routing for hoses and cables, two φ6 air tubes and ten application signal wires. It can be floor, wall, tilted or inverted mounted and is rated IP67 equivalent for dust and drip protection.
Nachi Robotics MZ07-01MZ07-01The MZ07-01 is a 6-axis articulated industrial robot with a 7 kg wrist payload and 723 mm maximum reach. It uses AC servo motors, has ±0.02 mm position repeatability, and is rated IP67 equivalent for dust and drip protection. It can be mounted on the floor, wall, angle, or ceiling and is intended for material handling, assembly, vision, and other applications.
Nachi Robotics MZ07FMZ07FThe MZ07F is a six-axis articulated industrial robot with a hollow wrist for routing tool cables and hoses. It has a 7 kg payload and 723 mm reach, with ±0.015 mm position repeatability. It is intended for machine tending, material handling, palletizing, and dispensing.
Nachi Robotics MZ12WMZ12WThe Nachi MZ12W is a six-axis vertically articulated industrial robot built for wall, floor, tilted or inverted mounting, so it can be installed where floor space is limited. It carries a 12 kg wrist payload with a maximum reach of 1564 mm and repeats positions to within ±0.04 mm using AC servo motors on all six axes. Applications listed are machine tending, material handling, palletizing, dispensing, board transport, assembly and precision inspection.
Nachi Robotics MZ35SMZ35SThe MZ35S is a 6-axis articulated industrial robot with a 35 kg wrist payload and 1882 mm maximum reach. It has a hollow wrist with internally routed cables, IP67-equivalent wrist protection, and a 250 kg robot mass. It is intended for machine tending, material handling, palletizing, and dispensing.
Nachi Robotics MZ50LFMZ50LFThe Nachi MZ50LF is a six-axis articulated industrial robot with a 50 kg wrist payload and 2502 mm maximum reach. It uses AC servo motors and routes wiring through a hollow wrist. It is rated IP67 equivalent and intended for floor or inverted installation.
Nachi Robotics SRA100BSRA100BThe Nachi Robotics SRA100B is a six-axis articulated industrial robot driven by AC servo motors, intended for spot welding and other handling applications. It has a 100 kg wrist payload, a reach of 2,071 mm, and ±0.1 mm position repeatability. The robot weighs 690 kg and is floor-mounted.
Nachi Robotics SRA100J-01SRA100J-01The SRA100J-01 is a six-axis articulated industrial robot from Nachi's SRA series, driven by AC servo motors and intended for spot welding and other material-handling tasks. It has a 100 kg payload, a 1,634 mm reach, and ±0.1 mm repeatability, with floor mounting and an operating temperature range of 0 to 45 °C.
Nachi Robotics SRA120EL-01SRA120EL-01The Nachi SRA120EL-01 is a six-axis articulated industrial robot in the SRA series, configured as a long-arm spot-welding robot. It has a 120 kg payload, a 3,099 mm reach and ±0.15 mm position repeatability, and is floor mounted.
Nachi Robotics SRA133HSRA133HThe Nachi SRA133H is a six-axis articulated industrial robot intended for spot welding, machine tending, material handling, and palletizing. It has a 133 kg wrist payload, a 2654 mm reach, and ±0.1 mm position repeatability. The robot is floor-mounted and uses an AC servo drive system.
Nachi Robotics SRA133HL-01SRA133HL-01The Nachi Robotics SRA133HL-01 is a six-axis articulated industrial robot for spot welding, machine tending, material handling, palletizing, and dispensing. It has a 133 kg payload and ±0.15 mm position repeatability. The hollow arm routes pneumatic, power, and servomotor cables internally, and the SRA series is paired with FD controllers.
Nachi Robotics SRA166SRA166The Nachi Robotics SRA166 is a floor-mounted industrial robot in the SRA series, intended for spot welding and other material-handling tasks. It has a 166 kg payload and a 2,654 mm reach. Nachi lists the robot weight as 1,060 kg.
Nachi Robotics SRA166H-01SRA166H-01The Nachi SRA166H-01 is a six-axis articulated industrial robot with a 166 kg wrist payload and 2,654 mm reach. It is floor-mounted and uses an AC servo drive system, intended for spot welding, machine tending, material handling, and palletizing. It is paired with a Nachi FD controller for motion and servo-gun control.
Nachi Robotics SRA166LSRA166LThe Nachi SRA166L is a six-axis articulated industrial robot. It is intended for spot welding, machine tending, material handling, palletizing, and dispensing. The document lists a 166 kg payload, 2951 mm reach, ±0.15 mm position repeatability, and 980 kg robot mass.
Nachi Robotics SRA166TLSRA166TLThe Nachi SRA166TL is a six-axis articulated industrial robot. The document lists a 166 kg payload and 3383 mm reach, with floor or shelf mounting. It is intended for material handling and spot welding, and uses FD controllers for motion and servo gun control.
Nachi Robotics SRA210H-01SRA210H-01The Nachi Robotics SRA210H-01 is a six-axis articulated industrial robot in the SRA-H series, intended for spot welding and handling applications. It uses a hollow arm to route pneumatic, power, and servomotor cables internally, and it is floor mounted. The document lists a 210 kg wrist payload, 2,654 mm reach, and ±0.15 mm position repeatability.
Nachi SRA100SRA100The Nachi SRA100 is an industrial robot in the SRA series, intended for spot welding and other applications. It has a payload of 100 kg and a reach of 2654 mm, and weighs 960 kg. The robot is floor-mounted and supports machine tending, material handling, palletizing, spot welding, and dispensing.
Nachi SRA100H-01SRA100H-01The Nachi SRA100H-01 is a six-axis articulated industrial robot driven by AC servo motors. It is intended for spot welding and related automotive applications, with a 100 kg wrist payload and 2654 mm reach. The robot uses a hollow arm for internal routing of pneumatic, power and servomotor cables.
Nachi SRA100HB-01SRA100HB-01The Nachi SRA100HB-01 is a six-axis articulated industrial robot. It has a 100 kg payload, a 2044 mm reach, and floor mounting. Its hollow arm routes pneumatic, power, and servomotor cables internally for spot-welding installations.
Nachi SRA133L-01SRA133L-01The SRA133L-01 is a six-axis articulated AC servo robot in Nachi's SRA series, built for spot welding in automotive body assembly and also used for machine tending, material handling, palletizing and dispensing. It carries a 133 kg payload, reaches 2,951 mm and holds ±0.15 mm position repeatability, and is floor mounted. Motion is programmed through the Nachi FD controller, which also provides servo gun control for spot welding.
Nachi SRA166TSRA166TThe SRA166T is a six-axis articulated industrial robot built by Nachi for spot welding and material handling. It carries a 166 kg payload, reaches 3086 mm and weighs 1310 kg, and is driven by AC servo motors. It is normally paired with Nachi's FD controller, whose servo gun software controls electrode closing and weld pressure.
Nachi SRA210SRA210The Nachi SRA210 is a floor-mounted industrial robot with a 210 kg payload and 2,674 mm reach, intended for machine tending, material handling, palletizing, and spot welding. It weighs 1,090 kg and is paired with Nachi FD controllers for spot welding motion and servo gun control.
Nachi SRA210TSRA210TThe Nachi SRA210T is a six-axis articulated robot of the SRA series, built for spot welding and material handling with a 210 kg payload and a 3106 mm reach. It is driven by AC servo motors and is paired with a Nachi FD controller that provides servo gun control and an integrated spot weld timer. The robot mounts on the floor or on a shelf mount and can be fitted with the A-Trac cable management system.
Nachi SRA210VSRA210V-01The Nachi SRA210V is a six-axis articulated robot built as the ceiling (inverted) mount version of the SRA210, aimed at spot welding cells in automotive production. It uses AC servo motors on all six axes and carries a 210 kg wrist payload with a 2674 mm reach and ±0.15 mm position repeatability. The robot mass is 990 kg and it is driven by Nachi's FD controller with servo gun software for spot welding.
Nachi SRA240SRA240The Nachi SRA240 is a floor-mounted industrial robot in the SRA series. It has a 240 kg payload and a 2,674 mm reach, and is listed for machine tending, material handling, palletizing, and spot welding. The document names an FD controller for SRA series robots but gives no further controller model.
Nachi SRA250-01SRA250-01The Nachi SRA250-01 is a six-axis articulated industrial robot with a 250 kg wrist payload and a 2,792 mm reach. It is floor-mounted and uses AC servo motors, with applications listed as machine tending, material handling, palletizing, and spot welding. The document states that it is paired with a Nachi FD controller and servo-gun software for spot welding.