Hardware Controllers Protocols Standards Concepts Manufacturers

Registry Hardware

DMG MORI CNC mill

Robots, CNC machines and PLCs: payload, reach, travels, joint limits

82 entries

All types CNC mill 82 CNC lathe 45 CNC multitasking 24 CNC grinder 13 Other 5 Additive machine 5

ManufacturerDMG MORI

All manufacturers DN Solutions107 DMG MORI82

FANUC5 Tormach2

DMG MORI CMX 1100 VCMX 1100 VThe CMX 1100 V is a DMG MORI vertical machining centre built on a rigid C-frame with a table that moves in the X axis. It has X, Y and Z strokes of 1,100 mm, 560 mm and 510 mm and accepts workpieces up to 1,000 kg. It is offered with SIEMENS, HEIDENHAIN or FANUC controls and with an inlineMASTER motor spindle running up to 15,000 min-1.
DMG MORI CMX 600 VCMX 600 VThe DMG MORI CMX 600 V is a CNC machine with X-, Y- and Z-axis strokes of 600 mm, 560 mm and 510 mm. It uses a 15,000 min−1 inlineMASTER spindle rated at 20 kW. The listed control alternatives are SIEMENS, HEIDENHAIN and MAPPS on FANUC.
DMG MORI DMC 100 U (FD) duoBLOCKDMC 100 U (FD) duoBLOCKThe DMC 100 U (FD) duoBLOCK is a DMG MORI machine tool with 1,000 mm X-axis, 1,250 mm Y-axis and 1,000 mm Z-axis strokes. It has a 453-pocket tool magazine and handles workpieces up to 1,000 mm diameter, 1,600 mm height and 2,000 kg weight, or 1,600 kg for Type FD. The document lists SIEMENS and HEIDENHAIN control alternatives and spindle options including powerMASTER and 5X torqueMASTER.
DMG MORI DMC 210 U (FD)DMC 210 U (FD)The DMC 210 U (FD) is a DMG MORI portal-type machining machine with 2,100 mm of X-axis stroke, 2,100 mm of Y-axis stroke and 1,250 mm of Z-axis stroke. It accepts workpieces up to 2,500 mm diameter and 1,460 mm height. Control and software can be specified as either SIEMENS or HEIDENHAIN.
DMG MORI DMC 340 U (FD)DMC 340 U (FD)The DMC 340 U (FD) is a gantry-design portal machining centre from DMG MORI that performs milling and turning in one setup on a DirectDrive rotary table. Its X and Y axes each travel 3,400 mm and Z travels 2,000 mm, and it accepts workpieces up to 3,400 mm diameter and 10,000 kg. It is offered with SIEMENS or HEIDENHAIN control and can be fitted with a pallet changer and a wheel-type tool magazine holding up to 243 tools.
DMG MORI DMC 55 H TwinDMC 55 H TwinThe DMG MORI DMC 55 H Twin is a twin-spindle horizontal machining center for milling, turning and grinding. It has X, Y and Z axis strokes of 580 mm, 750 mm and 500 mm, and accepts workpieces up to 630 mm diameter and 400 kg. The machine features permanent spindle synchronization (Syncmot) and a scalable tool magazine.
DMG MORI DMC 65 (FD) monoBLOCK 2nd GenerationDMC 65 (FD) monoBLOCK 2nd GenerationThe DMC 65 (FD) monoBLOCK 2nd Generation is a DMG MORI machining centre for 5-axis machining, usable as a standalone machine or integrated into an automated cell. Its work area covers 735 mm of X travel, 650 mm of Y travel and 560 mm of Z travel. It accepts workpieces up to 840 mm in diameter, 500 mm in height and 600 kg in weight.
DMG MORI DMC 65 H (FD) monoBLOCKDMC 65 H (FD) monoBLOCKThe DMC 65 H (FD) monoBLOCK is a DMG MORI horizontal machining center with X, Y and Z strokes of 650 mm, 950 mm and 700 mm. It uses a swivel rotary table for 5-axis machining and accepts workpieces up to 600 kg. Control and software alternatives are SIEMENS and HEIDENHAIN.
DMG MORI DMC 75 monoBLOCK 2nd GenerationDMC 75 monoBLOCK 2nd GenerationThe DMC 75 monoBLOCK 2nd Generation is a DMG MORI 5-axis CNC milling machine built on a single-cast monoBLOCK frame with a one-piece stand. It has X, Y and Z travels of 750 mm, 650 mm and 560 mm and accepts workpieces up to 840 mm diameter, 500 mm height and 600 kg. It uses a 20,000 rpm, 35 kW speedMASTER spindle and a machine-integrated tool magazine with 60 positions as standard.
DMG MORI DMC 80 U (FD) duoBLOCKDMC 80 U (FD) duoBLOCKThe DMC 80 U (FD) duoBLOCK is a DMG MORI machine tool with three linear axes (X, Y, Z) driven by ballscrews or similar, used to machine workpieces held within its work area. Its axis strokes are 800 mm in X, 1,050 mm in Y and 850 mm in Z, and it accepts workpieces up to 900 mm diameter, 1,450 mm height and 1,400 kg. Control and software can be supplied as SIEMENS or HEIDENHAIN alternatives.
DMG MORI DMC 85 (FD) monoBLOCKDMC 85 (FD) monoBLOCKThe DMC 85 (FD) monoBLOCK is a DMG MORI machining centre in the monoBLOCK series. It has maximum axis strokes of 935 mm in X, 850 mm in Y and 650 mm in Z, and accepts workpieces up to 800 mm diameter, 590 mm height and 1000 kg weight. Control and software alternatives listed for the machine are SIEMENS and HEIDENHAIN.
DMG MORI DMC 85 H (FD) monoBLOCKDMC 85 H (FD) monoBLOCKThe DMC 85 H (FD) monoBLOCK is a 5-axis machining center with a swivel rotary table and X/Y/Z strokes of 850, 1,150 and 900 mm. It accepts workpieces up to 830 mm diameter, 900 mm height and 800 kg. Control alternatives listed are SIEMENS and HEIDENHAIN, and a mill-turn variant is available up to 800 rpm.
DMG MORI DMC 90 U duoBLOCKDMC 90 U duoBLOCKThe DMC 90 U duoBLOCK is a DMG MORI machining centre with a swivelling rotary table for 5-axis simultaneous machining. Its work area covers 900 mm in X, 1,050 mm in Y and 850 mm in Z, and it accepts workpieces up to 900 mm diameter, 1,450 mm height and 1,400 kg. A motor spindle rated 52 kW and 430 Nm is fitted, and a rotating pallet changer allows setup in parallel with machining.
DMG MORI DMF 300|11 (FD, linear)DMF 300|11 (FD, linear)The DMF 300|11 (FD, linear) is a traveling column machine built for 5-axis simultaneous machining, with X, Y and Z strokes of 3,000 mm, 1,100 mm and 1,050 mm. Its spindle runs from 12,000 to 20,000 rpm with SK40/HSK-A63 or SK50/HSK-A100 tool interfaces and up to 430 Nm torque. It is offered with SIEMENS or HEIDENHAIN control and handles workpieces up to 6,000 kg.
DMG MORI DMF 300|8 (FD, linear)DMF 300|8 (FD, linear)The DMF 300|8 (FD, linear) is a DMG MORI travelling column machine for 5-axis simultaneous machining. Its X-, Y- and Z-axis strokes are 3,000 mm, 800 mm and 850 mm. It accepts workpieces up to 3,300 mm long, 850 mm wide, 1,050 mm in diameter, 900 mm high and 3,000 kg.
DMG MORI DMF 400|11 (FD, linear)DMF 400|11 (FD, linear)The DMF 400|11 (FD, linear) is a DMG MORI travelling column machining centre built for 5-axis simultaneous milling. Its linear axes travel 4,000 mm in X, 1,100 mm in Y and 1,050 mm in Z, and it accepts workpieces up to 8,000 kg. Options include an integrated rotary table for 5-axis work, a B-axis for 4-axis work, mill-turn operation and a dynamic package with a linear drive in the X-axis.
DMG MORI DMU 100 P (FD) duoBLOCKDMU 100 P (FD) duoBLOCKThe DMU 100 P (FD) duoBLOCK is a DMG MORI machining centre with 1,000 mm X-axis, 1,250 mm Y-axis and 1,000 mm Z-axis strokes. It takes workpieces up to 1,100 mm diameter and 1,600 mm height, with a maximum workpiece weight of 2,200 kg (1,600 kg for the Type FD version). Control and software alternatives listed are SIEMENS and HEIDENHAIN.
DMG MORI DMU 105 (FD) monoBLOCKDMU 105 (FD) monoBLOCKThe DMU 105 (FD) monoBLOCK is a CNC milling machine from the DMG MORI monoBLOCK series. It provides X/Y/Z strokes of 1,135 mm, 1,050 mm and 750 mm and handles workpieces up to 1,240 mm diameter and 2,000 kg. The machine supports five-axis machining and table options for milling and turning.
DMG MORI DMU 125 (FD) monoBLOCKDMU 125 (FD) monoBLOCKThe DMU 125 (FD) monoBLOCK is a DMG MORI CNC milling machine built on a one-piece column casting with 55 mm roller guideways in all axes. Its X, Y and Z travels are 1,335 mm, 1,250 mm and 900 mm, and it accepts workpieces up to 1,400 mm diameter, 790 mm height and 2,600 kg. Table options cover either 5-axis machining or complete machining with milling and turning.
DMG MORI DMU 200 GantryDMU 200 GantryThe DMU 200 Gantry is a gantry-style CNC machining center for large workpieces. It has a fixed 2,250 x 2,000 mm table and X/Y/Z strokes of 4,000/2,000/1,200 mm. It supports 5-axis machining with 45° or 90° heads and a 20,000 rpm compactMASTER spindle.
DMG MORI DMU 340 GantryDMU 340 GantryThe DMU 340 Gantry is a gantry-type CNC machining center from DMG MORI for large workpieces. Its X-, Y- and Z-axis strokes are 6,000 mm, 2,800 mm and 1,500 mm, and it accepts workpieces up to 7,000 mm long, 3,140 mm wide, 1,540 mm high and 30,000 kg. Control and software alternatives listed are SIEMENS and HEIDENHAIN.
DMG MORI DMU 40DMU 40The DMG MORI DMU 40 is a 5-axis CNC milling machine for simultaneous machining. It has X, Y and Z strokes of 550 mm, 450 mm and 420 mm and a swivel rotary table with a B-axis range of -35° to +110°. The base spindle is an inline spindle rated 12,000 rpm, 15 kW and 95 Nm, and the table accepts workpieces up to 300 kg.
DMG MORI DMU 40 (FD) eVoDMU 40 (FD) eVoThe DMU 40 (FD) eVo is a universal machining center from DMG MORI. Its linear axes travel 400 mm in X, 400 mm in Y and 375 mm in Z. It accepts workpieces up to 450 mm diameter, 460 mm height and 250 kg, or 200 kg on the FD type.
DMG MORI DMU 50 3rd GenerationDMU 50 3rd GenerationThe DMU 50 3rd Generation is a CNC universal milling machine with a swivel rotary table from DMG MORI. It has X-, Y- and Z-axis strokes of 650 mm, 520 mm and 475 mm, and accepts workpieces up to 630 mm diameter, 600 mm height and 300 kg. Control and software alternatives listed are SIEMENS, HEIDENHAIN and MAPPS Fanuc.
DMG MORI DMU 55 H TwinDMU 55 H TwinThe DMU 55 H Twin is a DMG MORI machine with two spindles that are permanently synchronized to each other, built for milling, turning and grinding in one setup. It has independent X, Y and Z axes with strokes of 580 mm, 750 mm and 500 mm respectively, and a scalable wheel magazine holding up to 214 tools per spindle. Its basic structure is made of GGG60 cast iron, and control and software alternatives are offered with SIEMENS.
DMG MORI DMU 60 (FD) eVo 2nd GenerationDMU 60 (FD) eVo 2nd GenerationThe DMU 60 (FD) eVo 2nd Generation is a 5-axis universal machining centre from DMG MORI for workpieces up to 700 mm diameter, 550 mm height and 500 kg. It has 750 mm X-axis travel and 550 mm Y- and Z-axis travel, and uses speedMASTER spindles. Control and software are offered as SIEMENS or HEIDENHAIN alternatives.
DMG MORI DMU 600 Gantry linearDMU 600 Gantry linearThe DMU 600 Gantry linear is a high-gantry milling machine built for large workpieces, with travels of 18,000 mm in X, 4,500 mm in Y and 2,000 mm in Z. All axes use direct drive technology: linear drives on X, Y and Z, and torque drives on the A and C rotary axes. It is intended for machining workpieces up to 18,000 mm long, 2,800 mm wide, 2,500 mm high and 150,000 kg in weight.
DMG MORI DMU 600 P (FD)DMU 600 P (FD)The DMU 600 P (FD) is a large portal-design universal CNC machine for 5-side and 5-axis machining of oversized workpieces. Its working travels are 18,750 mm in X, 4,800 mm in Y and 1,500 mm in Z, and it accepts workpieces up to 18,100 mm long, 3,500 mm wide, 5,000 mm in diameter, 3,000 mm high and 120,000 kg in weight. The main drive is rated 53 kW and 1,445 Nm, with an optional 60 kW / 2,500 Nm drive, and control is available with SIEMENS or HEIDENHAIN systems.
DMG MORI DMU 65 (FD) monoBLOCK 2nd GenerationDMU 65 (FD) monoBLOCK 2nd GenerationThe DMU 65 (FD) monoBLOCK 2nd Generation is a DMG MORI milling machine in the monoBLOCK series. It has linear strokes of 735 mm in X, 650 mm in Y and 560 mm in Z, and accepts workpieces up to 840 mm diameter, 500 mm height and 1,000 kg. Control and software alternatives listed are SIEMENS and HEIDENHAIN.
DMG MORI DMU 65 H (FD) monoBLOCKDMU 65 H (FD) monoBLOCKThe DMU 65 H (FD) monoBLOCK is a DMG MORI universal machining centre with linear axis strokes of 650 mm in X, 950 mm in Y and 700 mm in Z. It holds workpieces up to 840 mm diameter, 770 mm height and 600 kg. Control and software can be specified as SIEMENS or HEIDENHAIN.
DMG MORI DMU 75 monoBLOCK 2nd GenerationDMU 75 monoBLOCK 2nd GenerationThe DMU 75 monoBLOCK 2nd Generation is a machine from DMG MORI's monoBLOCK series, built on a monoBLOCK machine concept. It has linear axis strokes of 750 mm in X, 650 mm in Y and 560 mm in Z. It accepts workpieces up to 840 mm diameter, 500 mm height and 600 kg weight.
DMG MORI DMU 80 (FD) eVoDMU 80 (FD) eVoThe DMU 80 (FD) eVo is a DMG MORI universal machining center. Its X-, Y- and Z-axis strokes are 800 mm, 650 mm and 550 mm. It is listed for workpieces up to 800 mm diameter, or 830 mm diameter for Type FD, with a maximum height of 600 mm and maximum weight of 600 kg.
DMG MORI DMU 80 P (FD) duoBLOCKDMU 80 P (FD)The DMU 80 P (FD) duoBLOCK is a DMG MORI machining centre that performs milling and turning in a single setup. Its work area provides axis strokes of 800 mm in X, 1,050 mm in Y and 850 mm in Z. It uses a DirectDrive table with rotational speeds up to 800 rpm and is offered with SIEMENS or HEIDENHAIN control and software.
DMG MORI DMU 85 (FD) monoBLOCK 2nd GenerationDMU 85 (FD) monoBLOCK 2nd GenerationThe DMU 85 (FD) monoBLOCK 2nd Generation is a DMG MORI machining centre for 5-axis simultaneous milling of workpieces. Its linear travels are 935 mm in X, 850 mm in Y and 650 mm in Z. The machine accepts workpieces up to 1,040 mm diameter, 590 mm height and 1,500 kg, and occupies a footprint of 12.3 m².
DMG MORI DMU 85 H (FD) monoBLOCKDMU 85 H (FD) monoBLOCKThe DMU 85 H (FD) monoBLOCK is a universal 5-axis machining centre built on a one-piece cast iron machine bed (monoBLOCK). It uses a swivel rotary table with bearings on both sides to position workpieces up to 1,000 kg within a working area of 850 mm (X), 1,150 mm (Y) and 900 mm (Z) travel. It is offered with SIEMENS or HEIDENHAIN control and in a mill-turn variant.
DMG MORI DMU 90 P duoBLOCKDMU 90 P duoBLOCKThe DMU 90 P duoBLOCK is a DMG MORI CNC machining centre built on the duoBLOCK machine structure. It provides 900 mm of X-axis travel, 1,050 mm of Y-axis travel and 850 mm of Z-axis travel, and can machine workpieces up to 1,000 mm in diameter, 1,450 mm in height and 1,800 kg in weight. In its top configuration it performs simultaneous 5-axis machining.
DMG MORI DMU 95 monoBLOCK 2nd GenerationDMU 95 monoBLOCK 2nd GenerationThe DMU 95 monoBLOCK 2nd Generation is a DMG MORI 5-axis CNC machining centre for simultaneous milling of workpieces up to ø1,040 x 590 mm and 1,000 kg. Its linear travels are 950 mm in X, 850 mm in Y and 650 mm in Z, and it uses speedMASTER #40 spindles running up to 20,000 min-1. Control and software alternatives are SIEMENS or HEIDENHAIN.
DMG MORI DMV 145DMV 145The DMG MORI DMV 145 is a vertical machining center with 3 axes and a fixed table. It has X, Y and Z strokes of 1450 mm, 700 mm and 550 mm and accepts workpieces up to 2000 kg. The basic spindle runs at 20,000 rpm and the basic disk magazine holds 20 tools.
DMG MORI DMV 200DMV 200The DMV 200 is a vertical milling center with CNC-controlled linear axes on X, Y and Z. Its travels are 2,000 mm in X, 700 mm in Y and 550 mm in Z. It is intended for milling parts up to 2,160 mm long, 700 mm wide, 550 mm high and 3,000 kg in weight.
DMG MORI DMX 60 UDMX 60 UThe DMX 60 U is a universal milling center built on a monolithic machine bed with castings and roller guideways in all linear axes. It has 600 mm X and Y strokes and 510 mm Z stroke, and carries a swivel-rotary table that allows five-sided machining of complex parts in one set-up. Workpieces up to 630 mm diameter, 450 mm height and 300 kg can be machined.
DMG MORI DMX 80 UDMX 80 UThe DMX 80 U is a universal milling center with a swivel-rotary table for 5-sided machining of complex parts in one set-up. It has 800 mm X-axis, 600 mm Y-axis and 510 mm Z-axis strokes and accepts workpieces up to 800 mm diameter, 450 mm height and 350 kg. Linear axes use roller guideways, direct drive in X and Y, and linear scales for positioning accuracy.
DMG MORI HSC 55 linearHSC 55 linearThe HSC 55 linear is a 5-axis CNC milling machine from DMG MORI. It has 450 mm X, 650 mm Y and 460 mm Z travels, a 28,000 rpm HSK-A63 spindle, and a standard 30-position tool magazine. Its direct-driven axes provide up to 80 m/min rapid traverse and 2 g acceleration.
DMG MORI INH 63INH 63The DMG MORI INH 63 is a machine tool whose work area is defined by X-, Y- and Z-axis strokes of 1,050 mm, 1,100 mm and 1,050 mm. It accepts workpieces up to 1,070 mm in diameter, 1,000 mm in height and 1,000 kg in weight. Control and software alternatives listed for the machine are MAPPS Fanuc.
DMG MORI INH 80INH 80The DMG MORI INH 80 is a machining centre with three linear axes and travels of 1,400 mm in X, 1,350 mm in Y and 1,350 mm in Z. It accepts workpieces up to 1,500 mm diameter, 1,300 mm height and 2,000 kg weight, and can be fitted with a 5-axis table. Control and software is provided by MAPPS Fanuc.
DMG MORI M1M1The M1 is a DMG MORI machine tool with three linear axes, offering a maximum stroke of 550 mm in X, 550 mm in Y and 510 mm in Z. It accepts workpieces up to 550 mm long, 550 mm wide, 400 mm high and 600 kg in weight. SIEMENS is listed among the control and software alternatives.
DMG MORI NH 4000 DCGNH 4000 DCGThe NH 4000 DCG is a DMG MORI machining center with X-, Y- and Z-axis strokes of 560 mm, 560 mm and 630 mm. It uses DCG (Direct Drive Motor) technology on the rotary axis, which the document describes as achieving zero backlash, high-speed rotation and high-precision indexing. It is programmed through a MAPPS Fanuc control and accepts workpieces up to 630 mm diameter, 900 mm height and 400 kg.
DMG MORI NH 5000 DCGNH 5000 DCGThe NH 5000 DCG is a DMG MORI machining centre with linear axis strokes of 730 mm in X, 760 mm in Y and 850 mm in Z. It accepts workpieces up to 800 mm in diameter, 1 000 mm in height and 500 kg in weight. It uses DCG technology and a direct drive motor for the rotary axis, and is controlled with MAPPS Fanuc.
DMG MORI NH 6300 DCGIINH 6300 DCGIIThe DMG MORI NH 6300 DCGII is a horizontal machining center. Its X-, Y-, and Z-axis strokes are 1,050 mm, 900 mm, and 980 mm. The document lists MAPPS Fanuc as a control and software alternative and states maximum workpiece dimensions of 1,050 mm diameter, 1,300 mm height, and 1,500 kg weight.
DMG MORI NHC 10000NHC 10000The DMG MORI NHC 10000 is a machine with X-, Y- and Z-axis strokes of 1,700 mm, 1,400 mm and 1,510 mm. It handles workpieces up to 2,000 mm diameter, 1,600 mm height and 3,000 kg. Its powerMASTER spindle has a maximum output of 55 kW and rapid traverse is 50 m/min on X, Y and Z.
DMG MORI NHC 4000NHC 4000The NHC 4000 is a horizontal machining center with a 400 × 400 mm pallet. Its linear axes travel 560 mm in X, 560 mm in Y and 660 mm in Z. The machine uses a 12,000 rpm spindle and can rapid traverse at up to 60,000 mm/min.
DMG MORI NHC 5000NHC 5000The NHC 5000 is a horizontal machining center with X, Y and Z travels of 730 mm, 730 mm and 880 mm. It has a 12,000 rpm spindle and a rapid traverse rate of up to 60 m/min. The machine accepts workpieces up to 800 mm diameter and 700 kg on a 500 × 500 mm pallet.
DMG MORI NHC 5500NHC 5500The NHC 5500 is a DMG MORI machine with 800 mm X-axis, 800 mm Y-axis, and 880 mm Z-axis strokes. It has a 60 m/min rapid traverse and accepts workpieces up to 800 mm diameter, 1,100 mm height, and 700 kg. MAPPS Mitsubishi is listed as a control and software alternative.
DMG MORI NHC 6300NHC 6300The DMG MORI NHC 6300 is a machine tool with X-, Y- and Z-axis strokes of 1050 mm, 900 mm and 1030 mm. It accepts workpieces up to 1050 mm diameter, 1300 mm height and 1500 kg weight. X-, Y- and Z-axis rapid traverse and cutting feedrate are 60 m/min, and MAPPS Mitsubishi is listed as a control and software alternative.
DMG MORI NHC 8000NHC 8000The DMG MORI NHC 8000 is a machining centre with X-, Y- and Z-axis strokes of 1,400 mm, 1,200 mm and 1,350 mm. It accepts workpieces up to 1,450 mm diameter, 1,450 mm height and 2,200 kg. Rapid traverse on the X-, Y- and Z-axes is 50 m/min.
DMG MORI NHX 10000NHX 10000The NHX 10000 is a horizontal machining centre built for large and difficult-to-cut workpieces. It has linear strokes of 1,700 mm in X, 1,400 mm in Y and 1,510 mm in Z, and accepts workpieces up to 2,000 mm in diameter, 1,600 mm in height and 3,000 kg in weight. The standard spindle delivers up to 40 kW, and all three linear axes rapid traverse and cut at 50 m/min.
DMG MORI NHX 5000 4th GenerationNHX 5000 4th GenerationThe NHX 5000 4th Generation is a horizontal machining center with X-, Y- and Z-axis strokes of 730 mm, 730 mm and 880 mm. It accepts workpieces up to 800 mm diameter, 1,000 mm height and 500 kg. It is offered with SIEMENS or MAPPS Fanuc control and software alternatives.
DMG MORI NHX 5500NHX 5500The DMG MORI NHX 5500 is a machine with 800 mm X-axis and 800 mm Y-axis strokes and an 880 mm Z-axis stroke. It lists rapid traverse and cutting feed rates of 60 m/min on the X, Y and Z axes. Workpiece limits stated are 800 mm diameter, 1,100 mm height and 1,000 kg weight.
DMG MORI NHX 5500 4th GenerationNHX 5500 4th GenerationThe DMG MORI NHX 5500 4th Generation is a horizontal machining center. It has 800 mm X-axis, 800 mm Y-axis and 880 mm Z-axis strokes, a 12,000 rpm spindle rated at 85 kW, and an HSK-A100 tool shank. It accepts workpieces up to 800 mm diameter, 1,100 mm height and 1,000 kg.
DMG MORI NHX 6300NHX 6300The NHX 6300 is a DMG MORI horizontal machining centre with X, Y and Z axis strokes of 1,050 mm, 900 mm and 1,030 mm. It uses a three-point support structure and high-resolution direct scale feedback on its axes. Workpieces up to 1,050 mm diameter, 1,300 mm height and 1,500 kg can be machined on it.
DMG MORI NHX 8000 4th GenerationNHX 8000 4th GenerationThe NHX 8000 4th Generation is a horizontal machining center from DMG MORI with 1,400 mm X, 1,200 mm Y and 1,350 mm Z axis strokes. It uses a 12,000 rpm powerMASTER spindle rated at 85 kW and takes HSK-A100 tooling as standard. An automatic pallet changer is fitted as standard, and pallet handling, tool handling and robot systems are available as options.
DMG MORI NMV 3000 DCG 2nd GenerationNMV 3000 DCG 2nd GenerationThe DMG MORI NMV 3000 DCG 2nd Generation is a vertical machining center with 5-axis control. Its rotary axes are driven by direct drive motors (DDM). The machine has X, Y and Z travels of 500 mm, 350 mm and 510 mm, and accepts workpieces up to 350 mm diameter, 300 mm height and 100 kg.
DMG MORI NMV 5000 DCG 2nd GenerationNMV 5000 DCG 2nd GenerationThe NMV 5000 DCG 2nd Generation is a vertical machining center with 5-axis control. Its rotary axes use direct drive motors, and its X-, Y-, and Z-axis strokes are 730 mm, 510 mm, and 510 mm. It accepts workpieces up to 700 mm diameter and 300 kg, with a maximum workpiece height of 450 mm.
DMG MORI NV 4000 DCGNV 4000 DCGThe DMG MORI NV 4000 DCG is a vertical machining center with X, Y and Z axis strokes of 600 mm, 400 mm and 400 mm. It accepts workpieces up to 750 mm long, 450 mm wide, 400 mm high and 350 kg. The machine uses DCG (Driven at the Center of Gravity) on all axes and is offered with MAPPS Fanuc control and software.
DMG MORI NVD 4000 DCGNVD 4000 DCGThe NVD 4000 DCG is a DMG MORI machine tool whose spindle runs at up to 12,000 min-1. Its linear axes have strokes of 600 mm in X, 400 mm in Y and 400 mm in Z. It accepts workpieces up to 700 mm long, 450 mm wide, 400 mm high and 350 kg in weight.
DMG MORI NVD 5000 α1ANVD 5000 α1AThe NVD 5000 α1A is a vertical machining centre from DMG MORI intended for die and mold work. Its X, Y and Z axis strokes are 1,020 mm, 510 mm and 510 mm respectively, and it accepts workpieces up to 1,320 mm long, 600 mm wide, 510 mm high and 1,200 kg in weight. It uses the MAPPS Fanuc control and software alternative, with direct scale feedback on the X, Y and Z axes.
DMG MORI NVD 6000 DCGNVD 6000 DCGThe NVD 6000 DCG is a DMG MORI machine tool intended for die and mold work, with motorised linear strokes of 900 mm in X, 600 mm in Y and 450 mm in Z. It accepts workpieces up to 1,000 mm long, 600 mm wide, 450 mm high and 800 kg in weight. The control and software alternative listed is MAPPS Fanuc.
DMG MORI NVX 5060 2nd GenerationNVX 5060 2nd GenerationThe NVX 5060 2nd Generation is a vertical machining center (CNC mill) built by DMG MORI. It has X-, Y- and Z-axis strokes of 600 mm, 530 mm and 510 mm, and accepts workpieces up to 900 mm long, 600 mm wide, 510 mm high and 800 kg. It uses a hybrid structure of wide slideways on the X and Y axes and roller guides on the Z axis, and is offered with either a No. 40 taper or a No. 50 taper spindle.
DMG MORI NVX 5080 2nd GenerationNVX 5080 2nd GenerationThe NVX 5080 2nd Generation is a vertical machining center built by DMG MORI. It has 800 mm X-axis, 530 mm Y-axis and 510 mm Z-axis strokes and accepts workpieces up to 1,100 mm long, 600 mm wide, 510 mm high and 1,000 kg. It is offered with MAPPS Fanuc control software and with either a No. 40 taper speedMASTER spindle or a No. 50 taper powerMASTER spindle.
DMG MORI NVX 7000NVX 7000The NVX 7000 is a vertical machining center with X, Y and Z axis strokes of 1,540 mm, 760 mm and 660 mm, intended for medium and large parts. It uses slideways on all axes, direct scale feedback and ball screw core cooling. The control and software alternative stated is MAPPS Fanuc.
DMG MORI PBN 200PBN 200The DMG MORI PBN 200 is a horizontal boring machining center with travels of 2,800 mm in X, 1,800 mm in Y and 1,600 mm in Z, and a 1,650 mm by 1,650 mm table. Its quill spindle of 200 mm diameter runs at a standard speed of 10,000 rpm and produces a maximum torque of 1,414 N·m. It is offered with CELOS/FANUC control and software, and is supplied with full covers and an automatic pallet changer as standard.
DMG MORI PBT 110PBT 110The PBT 110 is a horizontal boring and milling machine with a 110 mm boring spindle and a three-step geared head. It has travels of 2,500 mm in X, 1,800 mm in Y and 1,450 mm in Z, and a 1,400 mm by 1,750 mm table. Spindle speed is 5,000 rpm and the machine can also machine in the W axis.
DMG MORI PBT 130PBT 130The PBT 130 is a horizontal boring and milling machine with a 130 mm boring spindle and a 4,000 rpm spindle. Its linear travels are 3,000 mm on X, 2,300 mm on Y and 1,600 mm on Z, and it carries a 2,000 mm by 2,500 mm table rated for 15,000 kg. It also supports W-axis machining, in which the spindle axis feed is used instead of the Z axis to reduce the moving mass.
DMG MORI PBT 150 | 2500PBT 150 | 2500The DMG MORI PBT 150 | 2500 is a horizontal boring and milling machine built around a 150 mm boring spindle. Its linear axes travel 3,000 mm in X, 2,300 mm in Y and 1,600 mm in Z, with a table measuring 2,000 mm by 2,500 mm. The spindle runs at a standard speed of 2,500 rpm and is driven by an AC 30/24 kW motor (30 min/continuous).
DMG MORI ULTRASONIC 20 linear 3rd GenerationULTRASONIC 20 linear 3rd GenerationThe ULTRASONIC 20 linear 3rd Generation is a compact 5-axis simultaneous milling machine from DMG MORI that combines a high-frequency spindle with ULTRASONIC superimposition of tool rotation. The spindle oscillates the tool at amplitudes up to 15 µm through an HSK-E32 interface, which the document states reduces process forces by up to 50% compared with conventional machining. Linear drives move the X, Y and Z axes over strokes of 220 mm, 370 mm and 290 mm for machining workpieces up to Ø 220 x 283 mm.
DMG MORI ULTRASONIC 200 GantryULTRASONIC 200 GantryThe DMG MORI ULTRASONIC 200 Gantry is a 5-axis gantry machining center that uses ULTRASONIC superimposition of tool rotation for machining advanced materials. It has X/Y/Z strokes of 4,000/2,000/1,200 mm, a fixed 2,250 x 2,000 mm table with 10,000 kg loading capacity, and a 50 m/min rapid traverse. Spindle options are listed up to 30,000 rpm, with a vertical spindle at 20,000 rpm and 45° or 90° heads for 5-axis machining.
DMG MORI ULTRASONIC 210 PULTRASONIC 210 PThe ULTRASONIC 210 P is a 5-axis gantry machining centre from DMG MORI for large workpieces, with 2,100 mm X and Y strokes and a 1,250 mm Z stroke. It superimposes an ultrasonic oscillation of up to 15 µm amplitude on the rotating tool through an HSK-A63 or HSK-A100 interface, which the document states can reduce process forces by up to 50%. It takes workpieces up to 3,200 mm long, 2,500 mm wide, 1,460 mm high and 8,000 kg, and is supplied with a pallet changer as standard.
DMG MORI ULTRASONIC 60 PrecisionULTRASONIC 60 PrecisionThe ULTRASONIC 60 Precision is a DMG MORI 5-axis machining centre for ultrasonic precision machining of hard-brittle materials. Its work area gives 600 mm of X travel, 600 mm of Y travel and 510 mm of Z travel. The machine accepts workpieces up to 650 mm in diameter, 450 mm in height and 300 kg in weight.
DMG MORI ULTRASONIC 60 ProductionULTRASONIC 60 ProductionThe DMG MORI ULTRASONIC 60 Production is a CNC machining center for hard-brittle materials. It has a 600 mm by 600 mm by 510 mm work area, a swivel/rotary table, and a 15,000 rpm HSK-A63 spindle rated at 20 kW. It includes a 60-pocket tool changer and uses CELOS X on SINUMERIK ONE.
DMG MORI ULTRASONIC 80 PrecisionULTRASONIC 80 PrecisionThe ULTRASONIC 80 Precision is a 5-axis DMG MORI CNC machining centre for milling and grinding hard-brittle materials. It has 800 mm X, 600 mm Y and 510 mm Z travels and a 20,000 rpm HSK-A63 spindle. The machine uses ULTRASONIC process cycles and accepts workpieces up to 800 mm diameter, 450 mm height and 350 kg.
DMG MORI ULTRASONIC 80 eVo linearULTRASONIC 80 eVo linearThe ULTRASONIC 80 eVo linear is a universal machining centre from DMG MORI that combines 5-axis milling and mill-turn operation with ultrasonic superimposition of the tool rotation. Its linear X/Y/Z axes travel 800 mm, 650 mm and 550 mm and it accepts workpieces up to 800 mm diameter, 600 mm height and 600 kg. A swivel rotary table with a B-axis range of -5/+110° provides simultaneous 5-axis machining.
DMG MORI i 30 Vi 30 VThe DMG MORI i 30 V is a compact machine with 400 mm X-axis, 270 mm Y-axis and 280 mm Z-axis strokes. It uses an armless-type automatic tool changer and roller guides, and its rapid traverse rate is 62 m/min. Control and software alternatives listed are MAPPS Fanuc.
DMG MORI i 50i 50The DMG MORI i 50 is a machine for mass production machining of cylinder heads and cylinder blocks. It has X-, Y-, and Z-axis strokes of 500 mm, 550 mm, and 500 mm, and a rapid traverse rate of 62 m/min. It accepts workpieces up to 620 mm diameter, 700 mm height, and 400 kg.

esc

Jump toHardwaresection Controllerssection Protocolssection Standardssection Conceptssection Manufacturerssection

↑↓ navigate↵ openesc close

Can we use analytics cookies to see which specs people look up? Nothing is sold or used for ads.

Every value cites its source. Check the source before running code on real hardware. Logos are trademarks of their owners, shown to identify their products.Content licensed CC BY 4.0 · llms.txt · API