Machine Schema
Connect MCP

DMG MORI PBN 200

The DMG MORI PBN 200 is a horizontal boring machining center with travels of 2,800 mm in X, 1,800 mm in Y and 1,600 mm in Z, and a 1,650 mm by 1,650 mm table. Its quill spindle of 200 mm diameter runs at a standard speed of 10,000 rpm and produces a maximum torque of 1,414 N·m. It is offered with CELOS/FANUC control and software, and is supplied with full covers and an automatic pallet changer as standard.

Source checked8/8 values · 2026-10-25DMG MORICNC mill
X 2,800Y 1,800Z 1,600SPINDLE 10,000 rpmALL DIMENSIONS mmPBN 200 · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
2,800mm
Travel Y
1,800mm
Travel Z
1,600mm
Spindle max
10,000rpm

Specification

1 source
Categorycnc mill
Rapid traverse25 m/min
Table length1,650 mm
Table width1,650 mm

Quick answers

What is the maximum spindle speed of the DMG MORI PBN 200?
10000 rpm, per PBN 200 - Horizontal Boring - DMG MORI (en.dmgmori.com).
What is the X-axis travel of the DMG MORI PBN 200?
2800 mm, per PBN 200 - Horizontal Boring - DMG MORI (en.dmgmori.com).

Study notes

  • Structure is described as a hybrid combining vibration damping with dynamic rigidity, using a combination of linear guides and slideways.
  • Spindle is a quill type with a diameter of 200 mm.
  • Maximum spindle torque is 1,414 N·m.
  • Control and software alternatives are stated as CELOS/FANUC.
  • Automatic pallet changer (APC) is standard, allowing setup work to be performed during machining.

Safety

  • Full cover plus APC are fitted as standard to ensure operator safety.
↑↓ navigate↵ openesc close