Machine Schema
Connect MCP

DMG MORI PBT 110

The PBT 110 is a horizontal boring and milling machine with a 110 mm boring spindle and a three-step geared head. It has travels of 2,500 mm in X, 1,800 mm in Y and 1,450 mm in Z, and a 1,400 mm by 1,750 mm table. Spindle speed is 5,000 rpm and the machine can also machine in the W axis.

Source checked9/9 values · 2026-10-25DMG MORICNC mill
X 2,500Y 1,800Z 1,450SPINDLE 5,000 rpm22 kWALL DIMENSIONS mmPBT 110 · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
2,500mm
Travel Y
1,800mm
Travel Z
1,450mm
Spindle max
5,000rpm
Spindle power
22kW

Specification

1 source
Categorycnc mill
Table length1,400 mm
Table width1,750 mm
Table load5,000 kg

Quick answers

What is the maximum spindle speed of the DMG MORI PBT 110?
5000 rpm, per PBT 110 - Horizontal Boring - DMG MORI (en.dmgmori.com).
What is the X-axis travel of the DMG MORI PBT 110?
2500 mm, per PBT 110 - Horizontal Boring - DMG MORI (en.dmgmori.com).

Study notes

  • Boring spindle diameter is 110 mm (4 inch series).
  • Spindle motor rating is AC 26 kW for 30 minutes and 22 kW continuous.
  • Three-step geared head; spindle supported by large-diameter bearings at three points.
  • Control and software alternatives listed as CELOS/FANUC.
  • W-axis machining moves less mass than Z-axis machining; the document states energy consumption is reduced by one third in the drilling cycle and by one half in the tapping cycle (M16/100 holes).
  • Series variants: PBT 110 | 1400 (X 1,700 / Y 1,500 / Z 1,150 mm, table 1,200 x 1,400 mm, 5,000 kg), PBT 110 | 1600 (X 2,000 / Y 1,500 / Z 1,450 mm, table 1,400 x 1,600 mm, 6,500 kg), PBT 110 | 1750 (X 2,500 / Y 1,800 / Z 1,200 mm, table 1,200 x 1,750 mm, 10,000 kg).
  • Table maximum loading capacity stated as 5,000 kg for the base machine.
  • Table indexing is described as high-accuracy; no indexing accuracy value is given.
↑↓ navigate↵ openesc close