What is the maximum spindle speed of the DMG MORI PBT 150 | 2500?

2500 rpm, per PBT 150 - Horizontal Boring - DMG MORI (en.dmgmori.com).

What is the X-axis travel of the DMG MORI PBT 150 | 2500?

3000 mm, per PBT 150 - Horizontal Boring - DMG MORI (en.dmgmori.com).

DMG MORI PBT 150 | 2500

The DMG MORI PBT 150 | 2500 is a horizontal boring and milling machine built around a 150 mm boring spindle. Its linear axes travel 3,000 mm in X, 2,300 mm in Y and 1,600 mm in Z, with a table measuring 2,000 mm by 2,500 mm. The spindle runs at a standard speed of 2,500 rpm and is driven by an AC 30/24 kW motor (30 min/continuous).

Source checked8/8 values · 2026-10-25DMG MORI CNC mill

Travel X

3,000mm

Travel Y

2,300mm

Travel Z

1,600mm

Spindle max

2,500rpm

Spindle power

30kW

Specification

1 source

Category	cnc mill
Table length	2,000 mm
Table width	2,500 mm

Quick answers

What is the maximum spindle speed of the DMG MORI PBT 150 | 2500?: 2500 rpm, per PBT 150 - Horizontal Boring - DMG MORI (en.dmgmori.com).
What is the X-axis travel of the DMG MORI PBT 150 | 2500?: 3000 mm, per PBT 150 - Horizontal Boring - DMG MORI (en.dmgmori.com).

Study notes

W-axis machining is described as moving much less mass than Z-axis machining; the document states energy consumption drops by one third in the drilling cycle and by one half in the tapping cycle (M16/100 holes).
Boring spindle diameter is 150 mm.
Spindle motor rating is AC 30/24 kW (30 min/continuous).
Large-diameter bearings support the spindle span at three points.
Document states torque is 5 to 8 times greater than that of machining centers.
Control and software alternatives listed: CELOS/FANUC; no matching controller entry exists in the reference list.
Sibling variant PBT 150 | 2200: travels 3,000/2,000/1,300 mm, table 1,800 x 2,200 mm, table load 15,000 kg.
Table maximum loading capacity is given as 15,000 kg in the highlights but as 25,000 kg for the 2500 variant in the variant comparison table, so it is not recorded as a spec field.