What is the maximum spindle speed of the DMG MORI PBT 130?

4000 rpm, per PBT 130 - Horizontal Boring - DMG MORI (en.dmgmori.com).

What is the X-axis travel of the DMG MORI PBT 130?

3000 mm, per PBT 130 - Horizontal Boring - DMG MORI (en.dmgmori.com).

DMG MORI PBT 130

The PBT 130 is a horizontal boring and milling machine with a 130 mm boring spindle and a 4,000 rpm spindle. Its linear travels are 3,000 mm on X, 2,300 mm on Y and 1,600 mm on Z, and it carries a 2,000 mm by 2,500 mm table rated for 15,000 kg. It also supports W-axis machining, in which the spindle axis feed is used instead of the Z axis to reduce the moving mass.

Source checked9/9 values · 2026-10-25DMG MORI CNC mill

Travel X

3,000mm

Travel Y

2,300mm

Travel Z

1,600mm

Spindle max

4,000rpm

Spindle power

30kW

Specification

1 source

Category	cnc mill
Table length	2,000 mm
Table width	2,500 mm
Table load	15,000 kg

Quick answers

What is the maximum spindle speed of the DMG MORI PBT 130?: 4000 rpm, per PBT 130 - Horizontal Boring - DMG MORI (en.dmgmori.com).
What is the X-axis travel of the DMG MORI PBT 130?: 3000 mm, per PBT 130 - Horizontal Boring - DMG MORI (en.dmgmori.com).

Study notes

Boring spindle diameter is 130 mm.
Spindle motor is rated AC 30/24 kW (30 min / continuous duty).
W-axis machining is said to cut energy consumption by about one third in the drilling cycle and one half in the tapping cycle (M16, 100 holes).
Each axis uses large-diameter pretensioned ball screws and square slideways.
Spindle torque is stated as 5 to 8 times greater than that of machining centers.
The spindle uses large-diameter bearings supporting its span at three points.
Control and software alternatives are given as CELOS/FANUC; no specific controller model is named.
The document also lists related models PBT 150 | 2200 and PBT 150 | 2500, with table load capacities of 15,000 kg and 25,000 kg.