Machine Schema
Connect MCP

DMG MORI NVX 5080 2nd Generation

The NVX 5080 2nd Generation is a vertical machining center built by DMG MORI. It has 800 mm X-axis, 530 mm Y-axis and 510 mm Z-axis strokes and accepts workpieces up to 1,100 mm long, 600 mm wide, 510 mm high and 1,000 kg. It is offered with MAPPS Fanuc control software and with either a No. 40 taper speedMASTER spindle or a No. 50 taper powerMASTER spindle.

Source checked5/5 values · 2026-10-25DMG MORICNC mill
X 800Y 530Z 510ALL DIMENSIONS mmNVX 5080 2nd Generation · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
800mm
Travel Y
530mm
Travel Z
510mm

Specification

1 source
Categorycnc mill
Table load1,000 kg

Quick answers

What is the X-axis travel of the DMG MORI NVX 5080 2nd Generation?
800 mm, per NVX 5080 2nd Generation - Vertical Milling - DMG MORI (en.dmgmori.com).

Study notes

  • The document names MAPPS Fanuc as the control and software alternative; no matching controller entry exists in the reference list.
  • Two spindle alternatives are described: a No. 40 taper speedMASTER spindle for high-speed machining and a No. 50 taper powerMASTER spindle for heavy-duty cutting.
  • The powerMASTER spindle uses a Spindle Growth Sensor for thermal expansion compensation.
  • The X- and Y-axes use super-wide slideways; the Z-axis uses high-rigidity roller guides.
  • The spindle unit is a cartridge design that includes the rear bearings.
  • Options listed: internal spiral-type chip conveyor, through-spindle coolant system with the unit on the coolant tank, and a coolant tank for collecting casting sludge.
  • The column shape is optimised to reduce thermal displacement, and the ceiling section opens for crane loading and unloading.
  • The page also links to an NVX 5000 2nd Generation series overview; no technical data for that model is given here.
↑↓ navigate↵ openesc close