Machine Schema
Connect MCP

DMG MORI DMF 400|11 (FD, linear)

The DMF 400|11 (FD, linear) is a DMG MORI travelling column machining centre built for 5-axis simultaneous milling. Its linear axes travel 4,000 mm in X, 1,100 mm in Y and 1,050 mm in Z, and it accepts workpieces up to 8,000 kg. Options include an integrated rotary table for 5-axis work, a B-axis for 4-axis work, mill-turn operation and a dynamic package with a linear drive in the X-axis.

Source checked7/7 values · 2026-10-25DMG MORICNC mill
X 4,000Y 1,100Z 1,050SK40/HSK-A63, SK50/HSK-A100120 TOOLSALL DIMENSIONS mmDMF 400|11 (FD, linear) · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
4,000mm
Travel Y
1,100mm
Travel Z
1,050mm
Axes
5

Specification

1 source
Categorycnc mill
Spindle taperSK40/HSK-A63, SK50/HSK-A100
Tool capacity120

Quick answers

How many axes does the DMG MORI DMF 400|11 (FD, linear) have?
5, per DMF 400|11 (FD, linear) - 5 Axis Milling - DMG MORI (en.dmgmori.com).
What is the X-axis travel of the DMG MORI DMF 400|11 (FD, linear)?
4000 mm, per DMF 400|11 (FD, linear) - 5 Axis Milling - DMG MORI (en.dmgmori.com).

Study notes

  • Workpiece envelope stated as max length 4,600 mm, max width 1,100 mm, max diameter 1,400 mm and max height 1,100 mm; max workpiece weight is 8,000 kg (17,637 lbs).
  • Spindles are offered from 12,000 to 20,000 rpm with torque up to 430 Nm; taper variants are SK40/HSK-A63 and SK50/HSK-A100.
  • Tool magazine holds up to 120 pockets; maximum tool length is 400 mm (540 mm for HSK-A100).
  • Control and software alternatives listed are SIEMENS and HEIDENHAIN; no controller match exists in the reference list.
  • 4-axis machining uses a B-axis; 5-axis machining uses an optional integrated rotary table; mill-turn technology is an option.
  • Machine bed is a single cast iron piece with three linear guideways in the X-axis; ball screws are internally cooled and ground, with helical toothed belts.
  • Dynamic package adds a linear drive in the X-axis and higher acceleration and feed rate in X, Y and Z.
  • Tool change takes place outside the working area; an optional partition wall allows pendulum machining.
  • Automation options: interface for robot handling (one working area) and interface for pendulum machining with partition wall, in VERTICO design.
↑↓ navigate↵ openesc close