Machine Schema
Connect MCP

DMG MORI DMF 300|11 (FD, linear)

The DMF 300|11 (FD, linear) is a traveling column machine built for 5-axis simultaneous machining, with X, Y and Z strokes of 3,000 mm, 1,100 mm and 1,050 mm. Its spindle runs from 12,000 to 20,000 rpm with SK40/HSK-A63 or SK50/HSK-A100 tool interfaces and up to 430 Nm torque. It is offered with SIEMENS or HEIDENHAIN control and handles workpieces up to 6,000 kg.

Source checked9/9 values · 2026-10-25DMG MORICNC mill
X 3,000Y 1,100Z 1,050SPINDLE 20,000 rpmSK40/HSK-A63, SK50/HSK-A100120 TOOLSALL DIMENSIONS mmDMF 300|11 (FD, linear) · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
3,000mm
Travel Y
1,100mm
Travel Z
1,050mm
Spindle max
20,000rpm
Axes
5

Specification

1 source
Categorycnc mill
Spindle taperSK40/HSK-A63, SK50/HSK-A100
Tool capacity120
Table load6,000 kg

Quick answers

How many axes does the DMG MORI DMF 300|11 (FD, linear) have?
5, per DMF 300|11 (FD, linear) - 5 Axis Milling - DMG MORI (en.dmgmori.com).
What is the maximum spindle speed of the DMG MORI DMF 300|11 (FD, linear)?
20000 rpm, per DMF 300|11 (FD, linear) - 5 Axis Milling - DMG MORI (en.dmgmori.com).
What is the X-axis travel of the DMG MORI DMF 300|11 (FD, linear)?
3000 mm, per DMF 300|11 (FD, linear) - 5 Axis Milling - DMG MORI (en.dmgmori.com).

Study notes

  • Control and software alternatives named in the document are SIEMENS and HEIDENHAIN; neither appears in the controller reference list.
  • Two spindle interfaces are offered: SK40/HSK-A63 and SK50/HSK-A100, with spindle torque up to 430 Nm.
  • Tool magazine holds up to 120 pockets; maximum tool length is 400 mm, or 540 mm for HSK-A100.
  • Optional configurations: 4-axis machining with B-axis, 5-axis machining with integrated rotary table, and mill-turn technology for complex geometries.
  • Optional dynamic package adds a linear drive in the X-axis plus higher acceleration and feed rates in the X, Y and Z axes.
  • Machine bed is a single cast iron piece with three linear guideways in the X-axis; internal-cooled ballscrews and ground ball screws with helical toothed belt are used in all axes.
  • Tool change is collision-free and takes place outside the working area.
  • An optional partition wall is offered to reduce downtime.
  • Workpiece limits stated: length 3,600 mm, width 1,100 mm, diameter 1,400 mm, height 1,100 mm.
  • DMG MORI Technology Cycles such as angularTOOL are stated to increase productivity.

Safety

  • Tool change is collision-free and occurs outside the working area.
↑↓ navigate↵ openesc close