Machine Schema
Connect MCP

DMG MORI NHX 10000

The NHX 10000 is a horizontal machining centre built for large and difficult-to-cut workpieces. It has linear strokes of 1,700 mm in X, 1,400 mm in Y and 1,510 mm in Z, and accepts workpieces up to 2,000 mm in diameter, 1,600 mm in height and 3,000 kg in weight. The standard spindle delivers up to 40 kW, and all three linear axes rapid traverse and cut at 50 m/min.

Source checked6/6 values · 2026-10-25DMG MORICNC mill
X 1,700Y 1,400Z 1,51040 kWALL DIMENSIONS mmNHX 10000 · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
1,700mm
Travel Y
1,400mm
Travel Z
1,510mm
Spindle power
40kW

Specification

1 source
Categorycnc mill
Rapid traverse50 m/min

Quick answers

What is the X-axis travel of the DMG MORI NHX 10000?
1700 mm, per NHX 10000 - Horizontal Milling - DMG MORI (en.dmgmori.com).

Study notes

  • Machine construction uses a box-in-box layout and is driven at the centre of gravity.
  • Maximum acceleration is 0.62 G in X, 0.51 G in Y and 0.45 G in Z (6.1 / 5.0 / 4.4 m/s2).
  • Cutting feedrate in X, Y and Z is 50 m/min (1,968.5 ipm), the same as the rapid traverse rate.
  • Maximum spindle torque is 1,413 N·m (1,042.2 ft·lbf) at 10% ED, listed as an option.
  • Maximum workpiece diameter is 2,000 mm (79 in) and maximum workpiece height is 1,600 mm (63 in).
  • Maximum workpiece weight is 3,000 kg (6,614 lbs).
  • Control and software alternative stated is MAPPS Fanuc; it does not correspond to a listed controller entry.
  • Machine is positioned as suited to large and difficult-to-cut workpieces.
↑↓ navigate↵ openesc close