What is the X-axis travel of the DMG MORI DMU 600 P (FD)?

18750 mm, per DMU 600 P (FD) - 5 Axis Milling - DMG MORI (en.dmgmori.com).

DMG MORI DMU 600 P (FD)

The DMU 600 P (FD) is a large portal-design universal CNC machine for 5-side and 5-axis machining of oversized workpieces. Its working travels are 18,750 mm in X, 4,800 mm in Y and 1,500 mm in Z, and it accepts workpieces up to 18,100 mm long, 3,500 mm wide, 5,000 mm in diameter, 3,000 mm high and 120,000 kg in weight. The main drive is rated 53 kW and 1,445 Nm, with an optional 60 kW / 2,500 Nm drive, and control is available with SIEMENS or HEIDENHAIN systems.

Source checked5/5 values · 2026-10-25DMG MORI CNC mill

Travel X

18,750mm

Travel Y

4,800mm

Travel Z

1,500mm

Spindle power

53kW

Specification

1 source

Category	cnc mill

Quick answers

What is the X-axis travel of the DMG MORI DMU 600 P (FD)?: 18750 mm, per DMU 600 P (FD) - 5 Axis Milling - DMG MORI (en.dmgmori.com).

Study notes

Working travels: X 18,750 mm, Y 4,800 mm, Z 1,500 mm.
Workpiece limits: length 18,100 mm, width 3,500 mm, diameter 5,000 mm, height 3,000 mm, weight 120,000 kg.
The highlights section quotes a working area for workpieces up to 6,000 mm x 3,000 mm and 25,000 (40,000) kg, which differs from the figures in the technical data section.
Main drive 53 kW with 1,445 Nm torque; optional 60 kW with 2,500 Nm torque.
Control and software alternatives listed: SIEMENS and HEIDENHAIN.
Changeable heads: B-axis kinematics for the gear spindle, C-/A-axis and C-/B-axis kinematics for the motor spindle.
Drive concept: gear rack drive in the X and Y axes, ball screw drive in the Z and W axes.
Machine bed, column and crossbeam are made of EN-GJS-600-3 cast iron; the design is based on FEM and modal analysis.
All relevant heat sources are liquid-cooled; coolant units are energy-efficient with optional connection to an on-site cooling circuit.
Also available as a mill/turn version and as double-table or multi-table versions.