Machine Schema
Connect MCP

Kassow Robots KR1205

The KR1205 is a seven-axis collaborative robot arm with a 5.0 kg payload and a 1200 mm reach on a compact base. It is programmed through a tablet-based Android interface and offers ROS/ROS2 and PROFINET interfaces. Overload sensors and joint-torque-based collision detection support operation in shared workspaces.

Source checked6/6 values · 2026-10-26Kassow RobotsCollaborative robot
Hover to measure reach
5 kg payloadR 1,2007-AXIS ARM0400800mmKR1205 · SIDE ELEVATIONReach envelope to scale · pose schematic
Payload
5kg
Reach
1,200mm
Axes
7
Weight
26kg

Specification

1 source
Categorycollaborative robot

Quick answers

What is the payload of the Kassow Robots KR1205?
5 kg, per 7 Axis Collaborative Robot Arm | KR Series | Kassow Robots (kassowrobots.com).
What is the reach of the Kassow Robots KR1205?
1200 mm, per 7 Axis Collaborative Robot Arm | KR Series | Kassow Robots (kassowrobots.com).
How many axes does the Kassow Robots KR1205 have?
7, per 7 Axis Collaborative Robot Arm | KR Series | Kassow Robots (kassowrobots.com).
How much does the Kassow Robots KR1205 weigh?
26 kg, per 7 Axis Collaborative Robot Arm | KR Series | Kassow Robots (kassowrobots.com).

Study notes

  • Seven axes allow an infinite number of elbow positions for a given end-effector position.
  • Interfaces stated: ROS / ROS2 and PROFINET.
  • Programming uses a modern tablet-based interface on the Android system with block-based programming and a split-screen concept.
  • Footprint of the standard base as stated: 130 x 130 mm.
  • Joint speed as stated: 225 deg/s.
  • Capability bundles (Cbuns) are available for OnRobot, Robotiq, Pickit and Sick2d peripherals.
  • REMII offline programming emulates the full robot system on a computer without a teach pendant.
  • CBunX framework lets partners build customised user interfaces.
  • Page also names KR1240 and KR1824 in the product listing but gives no specifications for them.

Safety

  • Collisions are detected by two independent subsystems: at controller level by calculating the torques expected on all joints, and at joint level by a control loop that controls position using torque.
  • If the torque requested by the control loop differs from the static torque by more than a threshold, the robot goes to emergency stop and an error is shown.
  • The cobots are equipped with sensors that detect overload.
  • A risk assessment analysis has to be done before operation.
↑↓ navigate↵ openesc close