Chiron hardware

Robots, CNC machines and PLCs: payload, reach, travels, joint limits

19 entries

CHIRON DZ 08DZ 08The DZ 08 is a twin-spindle vertical machining centre of the CHIRON 08 Series with a 200 mm distance between the two milling spindles. Travels are 450 x 270 x 310 mm and the water-cooled motor spindles run from 18,000 to 40,000 rpm. A chain magazine supplies both spindles and chip-to-chip time is 2.8 s.
CHIRON DZ 08 precision+DZ 08 precision+The DZ 08 precision+ is a twin-spindle machining centre of the CHIRON 08 Series precision+ line, which uses linear direct drives and precision guides for medical and precision-technology work. It has two spindles 200 mm apart with travels of 210 x 270 x 360 mm and spindle speeds of 37,500 to 40,000 rpm. Rapid feed reaches 100 m/min in Z.
CHIRON FZ 08FZ 08The FZ 08 is a single-spindle vertical machining centre of the CHIRON 08 Series, built on a moving-column principle with a steel/mineral-cast bed. It machines workpieces up to 450 x 270 x 310 mm in X, Y and Z with a water-cooled motor spindle running up to 40,000 rpm. Tools are held in a chain magazine and changed in 2.3 s chip-to-chip.
CHIRON FZ 08 mill turn precision+FZ 08 mill turn precision+The FZ 08 mill turn precision+ is a mill-turn machine from the CHIRON 08 Series precision+ line that combines a swivelling milling spindle with a main and a counter turning spindle for multi-functional machining from bar stock. The milling spindle runs from 30,000 to 54,000 rpm and swivels from -10° to +100°. Travels are 210 x 200 x 360 mm.
CHIRON FZ 18FZ 18The CHIRON FZ 18 is a single-spindle vertical machining center in the 18 series. It has X, Y and Z travels of 730 mm, 565 mm and 630 mm, and a milling spindle speed of 10,500 to 15,000 rpm. It uses a basket-type tool changer and is available with SK40 or HSK-A63 tool taper.
CHIRON Micro5 XLMicro5 XLThe Micro5 XL is a five-axis CNC milling machine for micro-machining. It has 170 mm X, 140 mm Y and 120 mm Z travels and an HSK-E25 milling spindle. The machine uses a tower tool magazine and is intended for small cubic workpieces.
Chiron DZ 12DZ 12The Chiron DZ 12 is a compact vertical machining centre from the 12 Series with two milling spindles set 250 mm apart on a travelling column, intended for high output per unit cost. Its X-Y-Z travel is 550 x 400 x 400 mm with rapid feed of 75 m/min on all three axes. Milling spindle speed spans 15,000 to 24,000 rpm and it takes HSK-A50 or HSK-A63 tooling from a chain magazine.
Chiron DZ 16DZ 16The Chiron DZ 16 is a CNC milling machine in the 16 Series with a mobile gantry design and two milling spindles spaced 320 mm apart. It has X-Y-Z travels of 340, 680 and 400 mm, an HSK-A63 spindle with a maximum speed of 20,000 rpm and rapid feed up to 75 m/min. The DZ 16 W configuration includes a workpiece changer.
Chiron DZ 22DZ 22The Chiron DZ 22 is a twin-spindle CNC machining center with a mobile gantry and travels of 620 mm in X, 980 mm in Y and 600 mm in Z. It uses HSK-A63 tooling and a milling spindle speed range of 12,500 to 20,000 rpm. The two milling spindles are spaced 600 mm apart.
Chiron DZ 22 HSK-A100DZ 22 HSK-A100The Chiron DZ 22 HSK-A100 is a twin-spindle CNC machining center variant with HSK-A100 tooling and travels of 620 mm in X, 980 mm in Y and 600 mm in Z. Its milling spindle runs at 10,000 rpm and the two milling spindles are spaced 600 mm apart. It is intended for hard-to-machine materials and large tools.
Chiron DZ 25DZ 25The Chiron DZ 25 is a double-spindle CNC machining center in the 25 Series. It has travels of 800 mm in X, 1,100 mm in Y and 800 mm in Z, two HSK-A63 spindles spaced 800 mm apart, and a chain magazine with 2 x 60 tool positions.
Chiron FZ 12FZ 12The Chiron FZ 12 is a compact vertical machining centre from the 12 Series with a single motor milling spindle mounted on a travelling column. Its X-Y-Z travel is 550 x 400 x 400 mm and rapid feed is 75 m/min on all three axes. Milling spindle speed spans 12,000 to 30,000 rpm and the machine takes HSK-A40, HSK-A50 or HSK-A63 tooling from a chain magazine.
Chiron FZ 15 Chain magazineFZ 15 Chain magazineThe Chiron FZ 15 is a single-spindle vertical machining centre with a travelling column, a mineral casting machine bed and a fully enclosed working area. This variant uses a chain type tool changer and has maximum travels of 730 mm in X, 400 mm in Y and 360 mm in Z. It is intended for machining complex workpieces that need a large number of tools.
Chiron FZ 16FZ 16The Chiron FZ 16 is a CNC milling machine in the 16 Series with a mobile gantry design and one milling spindle. It has X-Y-Z travels of 660, 680 and 500 mm, an HSK-A63 spindle with a maximum speed of 20,000 rpm and rapid feed up to 75 m/min. The FZ 16 S configuration is a five-axis version for 5-axis machining.
Chiron FZ 19FZ 19The Chiron FZ 19 is a five-axis single-spindle machining center in a mobile gantry design for complex tool, machinery, aerospace and automotive components. It uses a CHIRON Group motor spindle with HSK-A63 tooling and travels 850 mm in X, 980 mm in Y and 700 mm in Z. Spindle speed reaches 20,000 rpm and rapid feed reaches 75 m/min on the linear axes.
Chiron FZ 25FZ 25The Chiron FZ 25 is a single-spindle CNC machining center in the 25 Series. It has travels of 1,600 mm in X, 1,100 mm in Y and 800 mm in Z, a HSK-A63 spindle, and a 60-position chain magazine.
Chiron MILL SeriesMILL SeriesThe CHIRON MILL Series is a line of vertical traveling-column machining centers for milling small parts through long workpieces. The machine has a swivel head, direct drives, precision guides, and automatic tool change by the pickup method. It can be configured for four- or five-axis machining, and from the MILL 2000 onward the working area can be divided for parallel machining or loading and unloading.
Chiron MT 715MT 715The MT 715 is a 5-axis mill-turn machining centre from the Chiron 715 Series. It performs milling and turning operations in any sequence on six sides of a workpiece, using a swivelling milling spindle with an HSK-T63 taper and a main spindle plus an opposing counter spindle. An optional second machining unit and an integrated tool store with automation allow bar stock or chucked parts to be loaded and unloaded while the machine is running.
Chiron Micro5Micro5The Micro5 is a compact five-axis machining center for small, high-value parts in medical technology, precision technology and tool manufacturing. It has 78 mm of X travel, 56 mm of Y travel and 50 mm of Z travel, a single milling spindle reaching 60,000 rpm, and a tower magazine holding up to 60 tools. It can be loaded automatically with the Variocell UNO.