Beckhoff Automation hardware

Robots, CNC machines and PLCs: payload, reach, travels, joint limits

40 entries

Beckhoff CX2033CX2033The Beckhoff CX2033 is a fanless embedded PC for DIN rail mounting, built around an AMD Ryzen V1202B 2.3 GHz processor. It provides two Gbit Ethernet ports, four USB 3.2 Gen. 2 ports, one DVI-D interface and a multi-option interface for optional fieldbus or serial connections. The unit runs TwinCAT 2 or TwinCAT 3 automation software and can be expanded with left-side CX2500 modules and right-side CX2550 or CX2100 modules.
Beckhoff CX2042CX2042The Beckhoff CX2042 is a fan-cooled embedded PC CPU module in the CX2000 series. It uses a four-core Intel Xeon D-1527 at 2.2 GHz, provides 8 GB DDR4 RAM expandable to 64 GB, and has two Ethernet ports, DVI-I, four USB 3.0 ports, and a CFast slot. It runs Windows IoT Enterprise or TwinCAT/BSD and can use TwinCAT 3 runtime, with CX2000-series system modules connected over PCI Express.
Beckhoff CX2043CX2043The Beckhoff CX2043 is a DIN-rail-mountable embedded PC with an AMD Ryzen V1807B four-core processor. It provides two Gbit Ethernet interfaces, four USB 3.2 Gen. 2 ports, a DVI-D interface and one factory-option interface, and it can run TwinCAT 2 or TwinCAT 3 automation software. It is used as a PLC and motion control system and can connect to Beckhoff I/O terminals and CX2000-family expansion modules.
Beckhoff CX2062CX2062The Beckhoff CX2062 is a CPU module in the CX2000 series for industrial control and automation. It uses an Intel Xeon D-1548 eight-core processor and runs TwinCAT 3 or Windows IoT Enterprise, with system modules connected over PCI Express. It provides 8 GB DDR4 RAM, a CFast slot, and multiple interfaces, and is supplied by a CX2100-0014 power supply module.
Beckhoff CX2072CX2072The Beckhoff CX2072 is an embedded PC CPU module in the CX2000 series. It uses an Intel Xeon D-1567 12-core processor at 2.1 GHz with 8 GB DDR4 RAM and boots from a CFast card. It runs Windows 10/11 IoT Enterprise or TwinCAT/BSD and supports TwinCAT 3 automation tasks distributed across CPU cores.
Beckhoff CX5110-01xx-9020CX5110-01xx-9020The Beckhoff CX5110-01xx-9020 is an embedded PC used for industrial control. It has an Intel Atom E3815 1.20 GHz single-core processor, 2 GB RAM, and Ethernet, USB, and DVI-I interfaces. It can run TwinCAT PLC or PLC/motion control projects depending on the installed runtime.
Beckhoff CX5120CX5120The Beckhoff CX5120 is a fanless embedded PC for control cabinet installation. It uses an Intel Atom E3815 single-core processor at 1.46 GHz and provides two Gigabit Ethernet ports, four USB 2.0 ports, and a DVI-I interface. Depending on the ordered operating system and TwinCAT runtime, it can run PLC, motion control, or visualization applications.
Beckhoff CX5120-01xx-9020CX5120-01xx-9020The Beckhoff CX5120-01xx-9020 is a fanless embedded PC based on the CX5100 series hardware. It uses a 1.20 GHz Intel Atom E3815 single-core processor and provides two gigabit Ethernet ports, four USB 2.0 ports, a DVI-I output, and CFast/microSD storage slots. It runs Windows Embedded Compact 7 with TwinCAT 2 or TwinCAT 3 runtime and can be expanded with optional E-bus/K-bus I/O and communication interfaces.
Beckhoff CX5130CX5130The CX5130 is a fanless Embedded PC with an Intel Atom E3827 dual-core processor running at 1.75 GHz and 4 GB of DDR3 RAM. It provides two Gigabit Ethernet ports, one DVI-I output and four USB 2.0 ports, plus a slot for an optional factory-fitted interface. With a TwinCAT runtime installed it executes PLC, PLC/motion control and interpolating motion control projects, and it connects to I/O through E-bus or K-bus terminals.
Beckhoff CX5140CX5140The CX5140 is a fanless Embedded PC with an Intel Atom E3845 quad-core processor clocked at 1.91 GHz and 4 GB of non-expandable DDR3 RAM. It offers two Gigabit-capable Ethernet interfaces, four USB 2.0 ports, a DVI-I output and one optional interface slot, and connects to I/O through E-bus or K-bus terminals. With a TwinCAT runtime installed it runs PLC, PLC/motion control and interpolating axis applications, with or without visualization.
Beckhoff CX5230CX5230The CX5230 is an embedded PC with an Intel Atom x5-E3930 dual-core processor and 4 GB DDR4 RAM. It provides two Gigabit Ethernet interfaces, four USB 3.0 ports, a DVI-D port, and an optional interface for fieldbus or I/O modules. It runs Windows 10 IoT Enterprise or TwinCAT/BSD and can execute PLC and motion control applications with TwinCAT 3.
Beckhoff CX5330CX5330The Beckhoff CX5330 is a fanless embedded PC built around an Intel Atom x6214RE dual-core processor at 1.4 GHz with 4 GB LPDDR4 RAM. It provides two Ethernet ports, four USB 3.1 ports, one DisplayPort, and an optional interface, and can run Windows IoT, TwinCAT/BSD, or Beckhoff RT Linux depending on the ordering variant. It supports TwinCAT 3 PLC and motion-control runtimes and operates from -25 to +60 °C.
Beckhoff CX5340CX5340The CX5340 is an embedded PC built on an Intel Atom x6425RE quad-core processor at 1.9 GHz with 8 GB LPDDR4 RAM. It provides two Gigabit-capable Ethernet interfaces, four USB 3.1 ports, one DisplayPort, and an optional interface or E-bus/K-bus I/O level. With a TwinCAT 3 runtime it can run PLC, PLC/motion control, and interpolating motion control applications; cooling is passive and the power supply is electrically isolated.
Beckhoff CX5620CX5620The Beckhoff CX5620 is an Embedded PC built on an AMD Ryzen R1102G dual-core processor. It provides Ethernet, USB and DVI-D interfaces and uses an M.2 SSD as boot and storage medium. It runs TwinCAT automation software and can be extended with optional interface and I/O modules.
Beckhoff CX5630CX5630The Beckhoff CX5630 is a fanless embedded PC for industrial control and automation. It uses an AMD Ryzen R1505G dual-core processor with 8 GB DDR4 RAM and provides two Gbit Ethernet ports, USB 3.0, DVI-D, and optional interface or I/O modules. It can run TwinCAT automation software as a PLC and motion control system, with Windows IoT, TwinCAT/BSD, or Beckhoff RT Linux.
Beckhoff CX7000CX7000The Beckhoff CX7000 is an embedded PC with an Arm Cortex-M7 480 MHz single-core processor. It has 8 multi-functional 24 V DC inputs, 4 multi-functional 24 V DC outputs, one RJ45 Ethernet interface and one USB interface. It runs TwinCAT/RTOS with the TwinCAT 3 runtime and is programmed with TwinCAT 3 via Ethernet; E-bus or K-bus terminals can be attached and are recognized automatically at startup.
Beckhoff CX7031CX7031The Beckhoff CX7031 is an embedded PC in the CX7000 series with an Arm Cortex-M7 single-core processor at 480 MHz. It provides eight multi-functional digital inputs, four multi-functional digital outputs, a microSD slot, an Ethernet interface, and a PROFIBUS slave interface. It runs TwinCAT/RTOS and is programmed with TwinCAT 3 over Ethernet.
Beckhoff CX7050CX7050The Beckhoff CX7050 is an embedded PC for control applications. It uses an Arm Cortex-M7 480 MHz processor, runs TwinCAT/RTOS with the TwinCAT 3 runtime, and includes eight multi-functional digital inputs and four multi-functional outputs. It has an Ethernet interface and a CANopen master interface that can also operate as a CAN or CANopen slave.
Beckhoff CX7051CX7051The Beckhoff CX7051 is an embedded PC with an Arm Cortex-M7 single-core processor running at 480 MHz. It has eight multi-functional 24 V DC inputs, four multi-functional 24 V DC outputs, one Ethernet interface, and a CANopen responder (slave) interface. It runs TwinCAT/RTOS and is programmed with TwinCAT 3 via Ethernet; E-bus or K-bus terminals can be attached as required.
Beckhoff CX7080CX7080The Beckhoff CX7080 is an embedded PC in the CX7000 series with an Arm Cortex-M7 processor. It provides eight multi-functional 24 V DC inputs, four multi-functional outputs, Ethernet, and RS232/RS485 serial interfaces. It runs TwinCAT/RTOS with TwinCAT 3 runtime and connects to E-bus or K-bus terminals that are recognized automatically at startup.
Beckhoff CX7291CX7291The Beckhoff CX7291 is an embedded PC in the CX7000 series with an Arm Cortex-A9 single-core processor at 720 MHz. It provides eight multi-functional digital inputs and four multi-functional outputs, a microSD card slot, an Ethernet interface, and a switched RJ45 bus interface for BACnet/IP. It runs TwinCAT/RTOS and is programmed with TwinCAT 3 over the Ethernet interface.
Beckhoff CX7293CX7293Beckhoff CX7293 is an embedded PC for industrial control. It uses an Arm Cortex-A9 single-core processor at 720 MHz, runs TwinCAT/RTOS, and has 512 MB DDR3 RAM plus a microSD slot. It provides eight 24 V DC digital inputs and four 24 V DC digital outputs, connects to E-bus or K-bus I/O terminals, is programmed with TwinCAT 3 over Ethernet, and has a PROFINET RT device interface.
Beckhoff CX8010CX8010The CX8010 is a Beckhoff control system in an embedded PC format with an EtherCAT slave interface. It runs TwinCAT 2 PLC programs written in IEC 61131-3 and is programmed over an additional Ethernet interface. Optional K-bus or E-bus terminals attach to the bus interface, and the unit recognises the connected I/O system automatically at start-up.
Beckhoff CX8030CX8030The CX8030 is a Beckhoff controller (embedded PC) with an integrated PROFIBUS master interface. It is programmed with TwinCAT via an additional Ethernet interface, and K-bus or E-bus terminals can be connected in series, with the connected system detected automatically at start-up. It runs Windows Embedded CE 6 with TwinCAT 2 PLC and provides web visualization and web-based management.
Beckhoff CX8031CX8031The CX8031 is a Beckhoff control system (embedded PC) with a PROFIBUS slave interface, one Ethernet port and a USB device port. It runs TwinCAT 2 PLC software on Windows Embedded CE 6 and accepts E-bus or K-bus terminals, whose type it recognises automatically at start-up. The PROFIBUS address is set with two rotary switches and the transmission rate is detected automatically up to 12 Mbaud.
Beckhoff CX8050CX8050The CX8050 is a Beckhoff controller with a CANopen master interface and an Ethernet interface for programming. It can also connect K-bus or E-bus terminals and detects the connected system during startup. It runs Windows Embedded CE 6 with TwinCAT 2 PLC and is programmed using IEC 61131-3.
Beckhoff CX8080CX8080The Beckhoff CX8080 is an embedded PC/controller with an Arm9 400 MHz processor, 64 MB DDR2 RAM, and Windows Embedded CE 6. It has RS232 and RS485 serial interfaces on a 9-pin D-sub plus an Ethernet port for programming. It runs TwinCAT 2 PLC software and automatically detects connected E-bus or K-bus terminals at startup.
Beckhoff CX8090CX8090The Beckhoff CX8090 is a control system with an Arm9 processor running Windows Embedded CE 6 and TwinCAT 2 PLC. It connects to K-bus or E-bus I/O terminals, which it detects automatically at startup, and supports Modbus TCP plus Ethernet and TCP/IP communication. It is programmed with TwinCAT through a fieldbus or Ethernet interface.
Beckhoff CX8091CX8091The Beckhoff CX8091 is a control system with a switched Ethernet port and a bus interface for E-bus or K-bus terminals. It automatically recognizes the connected I/O system during start-up and is programmed with TwinCAT 2 through the fieldbus interface or the additional Ethernet interface. It supports BACnet or OPC UA, with simultaneous use not recommended due to the small memory.
Beckhoff CX8093CX8093The Beckhoff CX8093 is a control system with a PROFINET RT device interface implemented as a two-port switch. It can connect K-bus or E-bus I/O terminals and recognizes the connected I/O system during start-up. It is programmed with TwinCAT 2 PLC over the fieldbus interface or an additional Ethernet interface.
Beckhoff CX8110CX8110The Beckhoff CX8110 is a control system with an EtherCAT slave interface and TwinCAT 3 runtime. It connects E-bus or K-bus I/O terminals and is programmed via the Ethernet interface using TwinCAT 3. It uses an Arm Cortex-A9 processor, has 512 MB DDR3 RAM, and operates from 24 V DC.
Beckhoff CX8180CX8180The Beckhoff CX8180 is an embedded PC for industrial control, built around an Arm Cortex-A9 processor at 800 MHz with 512 MB DDR3 RAM. It runs Windows Embedded Compact 7 and TwinCAT 3 runtime, provides one RJ45 Ethernet interface and a 9-pin D-sub with RS232 and RS485 serial interfaces, and connects to E-bus or K-bus I/O terminals with automatic recognition. It is programmed with TwinCAT 3 over Ethernet.
Beckhoff CX8190CX8190The CX8190 is a fanless embedded controller running Windows Embedded Compact 7 with the TwinCAT 3 runtime. It has an Arm Cortex-A9 processor and provides one RJ45 10/100 Mbit/s Ethernet interface plus a bus interface switched to two RJ45 sockets. K-bus or E-bus terminals connect to it and the connected I/O type is recognised automatically at start-up.
Beckhoff CX8191CX8191The Beckhoff CX8191 is a control system with an Arm Cortex-A9 processor and TwinCAT 3 runtime. It connects to E-bus or K-bus I/O terminals and has a switched Ethernet bus interface. It supports BACnet for building automation and can also use OPC UA, MQTT, and Modbus TCP.
Beckhoff CX8200CX8200The CX8200 is a DIN-rail-mountable embedded PC used as a compact control platform for machine and plant automation. It runs Beckhoff RT Linux with the TwinCAT 3 runtime (XAR) and is programmed over its Ethernet interface. E-bus or K-bus terminals attach directly to the unit for I/O, and the unit detects the connected I/O system automatically at start-up.
Beckhoff CX8210CX8210The CX8210 is an embedded PC used as a machine control, with an EtherCAT slave interface so it can operate as a slave device on an EtherCAT network. It runs Beckhoff RT Linux and the TwinCAT 3 runtime (XAR) on an Arm Cortex-A53 dual-core processor at 1.2 GHz with 1 GB of RAM. E-bus or K-bus terminals attach to it for I/O, and the unit recognises the connected I/O system automatically at start-up.
Beckhoff CX8280CX8280The Beckhoff CX8280 is an embedded PC with an Arm Cortex-A53 dual-core processor at 1.2 GHz and 1 GB LPDDR4 RAM. It provides one Gigabit Ethernet interface, one USB 3.0 interface, and a 9-pin D-sub bus interface with one RS232 and one RS485 serial port. It runs Beckhoff RT Linux with TwinCAT 3 runtime (XAR) and accepts E-bus or K-bus terminals.
Beckhoff CX8290CX8290The CX8290 is an Embedded PC used as a controller with a second switched Ethernet port. It uses an Arm Cortex-A53 dual-core processor at 1.2 GHz and runs Beckhoff RT Linux. It is programmed with TwinCAT 3 and connects E-bus or K-bus I/O terminals, with a 24 V DC supply.
Beckhoff CX9020CX9020The Beckhoff CX9020 is a DIN rail-mountable embedded control system with a 1 GHz Arm Cortex-A8 processor. It connects directly to Beckhoff E-bus or K-bus I/O and includes two switched Ethernet ports, USB and DVI-D interfaces. It runs Windows Embedded Compact 7 and can run TwinCAT PLC and motion control software.
Beckhoff CX9240CX9240The CX9240 is a DIN rail-mountable embedded PC used as an Ethernet control system for PLC and motion control applications. It runs Beckhoff RT Linux on a four-core 1.2 GHz Arm Cortex-A53 CPU with 2 GB LPDDR4 RAM, two independent 1 Gbit Ethernet interfaces, four USB 3.0 ports and a DisplayPort. The operating system, TwinCAT and user projects are stored on an interchangeable microSD card, and Beckhoff I/O systems connect directly to the CPU module via E-bus or K-bus.