DMG MORI CNC multitasking

Robots, CNC machines and PLCs: payload, reach, travels, joint limits

24 entries

DMG MORI CTX 750CTX 750The DMG MORI CTX 750 is a universal turning machine for workpieces up to 700 mm diameter. It provides X-, Y- and Z-axis strokes, a 127 mm bar capacity, and turret options for milling. Control alternatives listed are SIEMENS and Fanuc.
DMG MORI CTX beta 1250 TC 4ACTX beta 1250 TC 4AThe CTX beta 1250 TC 4A is a DMG MORI turn-mill machine that combines turning with milling using a compactMASTER turn-mill spindle and a second tool carrier. Its linear strokes are 490 mm in X, 200 mm in Y and 1,200 mm in Z, and it accepts workpieces up to 340 mm diameter and 1,185 mm long, with 102 mm bar capacity. The B-axis swivels ±110° so tools can approach the workpiece at an angle.
DMG MORI CTX beta 450 TCCTX beta 450 TCThe CTX beta 450 TC is a turn-mill machine that combines turning, milling and grinding on one machine base, with a left and a right spindle for complete machining of a workpiece in up to six sides. Its compactMASTER turning and milling spindle runs at 15,000 rpm as standard and the machine accepts bar stock up to 102 mm diameter and workpieces up to ø500 x 1,100 mm. Axis travels are 750 mm in X, 250 mm in Y and 1,100 mm in Z, with rapid traverse rates up to 50 m/min.
DMG MORI CTX gamma 2000 TCCTX gamma 2000 TCThe CTX gamma 2000 TC is a turn and mill machine built for 6-sided complete machining of a workpiece in one setup. It accepts workpieces up to 700 mm in diameter and 2000 mm in length, with a maximum bar capacity diameter of 127 mm. Its linear axes travel up to 800 mm in X, 420 mm in Y and 2050 mm in Z.
DMG MORI CTX gamma 3000 TCCTX gamma 3000 TCThe CTX gamma 3000 TC is a turn-mill machine that combines turning with milling to machine workpieces on six sides in one setup. It accepts workpieces up to 700 mm in diameter and 3000 mm in length, with a bar capacity of 127 mm. Axis strokes are 800 mm in X, 420 mm in Y and 3050 mm in Z, and the compactMASTER milling spindle runs at up to 12,000 rpm with 36 kW and 220 Nm.
DMG MORI DMC 160 U (FD) duoBLOCKDMC 160 U (FD) duoBLOCKThe DMC 160 U (FD) duoBLOCK is a DMG MORI machine that performs milling and turning in one setup. It has 1,600 mm X-axis and Y-axis strokes and a 1,100 mm Z-axis stroke. The DirectDrive table rotates up to 400 rpm, and the machine accepts workpieces up to 1,600 mm diameter and 1,350 mm height.
DMG MORI DMC 270 U (FD)DMC 270 U (FD)The DMC 270 U (FD) is a DMG MORI portal (gantry) machining centre from the DECKEL MAHO portal series that performs milling and turning in one setup on a DirectDrive rotary table. Its linear axis strokes are 2,700 mm in X, 2,700 mm in Y and 1,600 mm in Z, and it accepts workpieces up to 3,400 mm diameter. The FD type is the mill/turn version, with a reduced maximum workpiece weight of 6,000 kg compared with 9,000 kg for the standard machine.
DMG MORI DMU 125 P (FD) duoBLOCKDMU 125 P (FD) duoBLOCKThe DMG MORI DMU 125 P (FD) duoBLOCK is a machining center that performs milling and turning in one setup. It has X-, Y-, and Z-axis strokes of 1,250 mm, 1,250 mm, and 1,000 mm, a DirectDrive table with rotational speeds up to 500 rpm, and a wheel magazine with 453 tool pockets. Control and software alternatives are SIEMENS and HEIDENHAIN.
DMG MORI DMU 160 P (FD) duoBLOCKDMU 160 P (FD) duoBLOCKThe DMU 160 P (FD) duoBLOCK is a DMG MORI machine for complete machining, combining milling and turning in one setup. It has 1,600 mm travels in X and Y, 1,100 mm in Z, and a 453-pocket wheel magazine. A DirectDrive table rotates up to 400 rpm.
DMG MORI DMU 270 P (FD)DMU 270 P (FD)The DMU 270 P (FD) is a DECKEL MAHO portal (gantry) machining centre that performs milling and turning in one setup on a DirectDrive rotary table. It has 2,700 mm of X and Y stroke and 1,600 mm of Z stroke, and accepts workpieces up to 3,400 mm diameter. The machine uses a gantry design with a vertically moving cross beam, hydraulic weight compensation and a three-point support bed that requires no foundation.
DMG MORI DMU 65 H (FD) monoBLOCK 2nd GenerationDMU 65 H (FD) monoBLOCK 2nd GenerationThe DMU 65 H (FD) monoBLOCK 2nd Generation is a 5-axis machining center with a swiveling rotary table supported on both sides. It performs milling, turning, grinding, measuring and gear cutting in one machine. Its X/Y/Z strokes are 650 mm, 950 mm and 700 mm, and it accepts workpieces up to 840 mm diameter, 770 mm height and 600 kg.
DMG MORI NT 4250 DCGNT 4250 DCGThe DMG MORI NT 4250 DCG is a machine for simultaneous 5-axis machining with a B axis driven by a direct drive motor. It has X, Y and Z travels of 750 mm, 420 mm and 1,650 mm, and accepts workpieces up to 660 mm diameter and 1,542 mm length. The document lists a MAPPS Fanuc control and standard digital tailstock with a movable swivel operation panel.
DMG MORI NT 4300 DCGNT 4300 DCGThe NT 4300 DCG is a DMG MORI turning and milling machine that carries a B axis with a direct drive motor for simultaneous 5-axis machining of complex parts. It accepts workpieces up to 660 mm in diameter and 1498 mm in length, with a maximum bar capacity of 90 mm. Axis strokes are 750 mm in X, 420 mm in Y and 1650 mm in Z.
DMG MORI NT 5400 DCGNT 5400 DCGThe DMG MORI NT 5400 DCG is a multitasking machine for simultaneous 5-axis machining of complex parts. It has a direct-drive B axis with ±120° rotation, a digital tailstock, and X/Y/Z strokes of 1,040/510/2,140 mm. It accepts workpieces up to 920 mm diameter and 1,921 mm length, with 103 mm bar capacity.
DMG MORI NT 6600 DCGNT 6600 DCGThe DMG MORI NT 6600 DCG is an integrated mill turn center intended for long, large-diameter workpieces. It handles workpieces up to 1,070 mm in diameter and 6,076 mm in length, with a 164 mm maximum bar capacity diameter. Its linear axis travels are 1,040 mm in X, 660 mm in Y, and 6,150 mm in Z.
DMG MORI NTX 1000NTX 1000The NTX 1000 is a DMG MORI turning/milling machine that performs simultaneous 5-axis machining of complex parts. Its B axis is driven by a direct drive motor and carries a Capto C5 tool spindle with a standard maximum speed of 12,000 min-1. It accepts workpieces up to 430 mm diameter and 800 mm length, with a 65 mm bar capacity.
DMG MORI NTX 2000NTX 2000The NTX 2000 is a DMG MORI turning and milling machine with two spindles and a B-axis that uses a direct drive motor for simultaneous 5-axis machining. It accepts workpieces up to 670 mm in diameter and 1,538 mm in length, and bar stock up to 65 mm in diameter. Linear strokes are 675 mm in X, 300 mm in Y and 1,562 mm in Z.
DMG MORI NTX 2500NTX 2500The DMG MORI NTX 2500 is a turn-mill machine for 6-sided machining with a Turn & Mill Spindle compactMASTER. It has a maximum workpiece diameter of 670 mm and a maximum bar capacity diameter of 80 mm, with X-axis and Y-axis strokes of 675 mm and 300 mm. Technical data is listed for Type 1500 and Type 3000 Z-axis configurations, with maximum workpiece lengths of 1,530 mm and 3,135 mm respectively.
DMG MORI NTX 500NTX 500The DMG MORI NTX 500 is a turn-mill CNC machine with a compactMASTER turn and mill spindle. It has X/Y/Z strokes of 375 mm, 150 mm and 610 mm, and accepts workpieces up to 350 mm diameter and 580 mm long with bar capacity up to 65 mm. It performs six-sided complete machining using main and sub spindles and a lower turret.
DMG MORI NZ DUENZ DUEThe NZ DUE is a production turning machine from the DMG MORI NZ Series with two turrets, each carrying an 80 mm Y-axis, and up to two B-axes. Turrets can be freely positioned on stations T1 to T4, and the B-axis swivels from -10° to +100°, which allows five-axis simultaneous operation with standard tools. Main and counter spindles are turnMASTER units rated up to 7,000 rpm, and an optional TWIN spindle arrangement provides two independent work areas for six-sided complete machining.
DMG MORI NZ DUE FORMULANZ DUE FORMULAThe NZ DUE FORMULA is a DMG MORI turning machine with two turrets, each carrying an 80 mm Y-axis, plus a milling spindle. It accepts bar stock up to 72 mm diameter and workpieces up to 740 mm long, with 210 mm X-axis, 80 mm Y-axis and 740 mm Z-axis strokes. Main and counter spindles are turnMASTER units running up to 5,000 min-1.
DMG MORI NZ QUATTRONZ QUATTROThe NZ QUATTRO is a DMG MORI turning machine with four turrets, each carrying an 80 mm Y-axis and optionally a B-axis. It machines bar stock up to 72 mm diameter and workpieces up to 1,290 mm long, with axis strokes of 210 mm in X, 80 mm in Y and 1,290 mm in Z. Each turret can be fitted with a B-axis for 5-axis simultaneous operation, and a TWIN spindle option provides two independent work areas for 6-sided complete machining.
DMG MORI NZ TRENZ TREThe NZ TRE is a turning machine with three turrets that can be positioned freely on the T1 to T4 stations. Each turret carries an 80 mm Y-axis, and up to three B-axes with a -10° to +100° swivel range can be fitted. Turrets with built-in milling motors allow turning, milling and 5-axis simultaneous operation on bar stock up to 72 mm diameter and workpieces up to 1,290 mm long.
DMG MORI ULTRASONIC 60 eVo linear 2nd GenerationULTRASONIC 60 eVo linear 2nd GenerationThe ULTRASONIC 60 eVo linear 2nd Generation is a universal machining centre that combines 5-axis simultaneous milling with mill-turn operation. It superimposes an ultrasonic oscillation of up to 15 µm on the rotating tool through an HSK-A63 interface, which lowers process forces and is intended for machining advanced materials. A swivel rotary table with a B-axis from -5° to +110° and a C-axis reaching 1,200 rpm provide the rotary motions.