Machine Schema
Connect MCP

FANUC P-250iB

The FANUC P-250iB is a six-axis industrial robot for painting and coating. It carries a 15 kg wrist load and reaches 2800 mm. It uses the R-30iB Plus Mate Cabinet controller and has a hollow wrist for process hose routing.

Source checked19/19 values · 2026-10-25FANUCIndustrial robot
Hover to measure reach
15 kg payloadR 2,8006-AXIS ARMREPEATABILITY ±0.07 mm01,0002,000mmP-250iB · SIDE ELEVATIONReach envelope to scale · pose schematic
Payload
15kg
Reach
2,800mm
Repeatability
±0.07mm
Axes
6
Weight
530kg

Specification

2 sources
Categoryindustrial robot

Joints

NameMax speed (°/s)
J1160
J2160
J3160
J4375
J5430
J6545

Quick answers

What is the payload of the FANUC P-250iB?
15 kg, per P-250iB Painting Robot (fanucamerica.com).
What is the reach of the FANUC P-250iB?
2800 mm, per P-250iB Painting Robot (fanucamerica.com).
What is the repeatability of the FANUC P-250iB?
±0.07 mm, per P-250iB Painting Robot (fanucamerica.com).
How many axes does the FANUC P-250iB have?
6, per P-250iB Painting Robot (fanucamerica.com).
How much does the FANUC P-250iB weigh?
530 kg, per P-250iB Painting Robot (fanucamerica.com).

Study notes

  • Intended for painting and coating applications.
  • Supports floor, wall, angle, and ceiling mount configurations.
  • Can be configured with a left-hand or right-hand arm for booth symmetry.
  • Uses a hollow wrist and through-arm process hose routing.
  • Optional seventh-axis rail is available for larger work envelopes.
  • Single or dual integrated process axis motors can be specified on the outer arm.
  • An optional Nylon-12 non-conductive outer arm and wrist is available.
  • A swing arm variant extends reach to 3575 mm.
  • Input power source is 380-575 VAC, 50-60 Hz, +10/-15%.
  • Controller series is R-30iB Plus.
  • Supports all major network communication protocols, but no specific protocols are named in the document.
  • Includes integrated diagnostic and reporting capabilities.
↑↓ navigate↵ openesc close