What is the payload of the FANUC M-410iC/500?

500 kg, per FANUC M-410iC/500 | 500 kg Payload Palletizer Robot (fanucamerica.com).

What is the reach of the FANUC M-410iC/500?

3143 mm, per FANUC M-410iC/500 | 500 kg Payload Palletizer Robot (fanucamerica.com).

What is the repeatability of the FANUC M-410iC/500?

±0.05 mm, per FANUC M-410iC/500 | 500 kg Payload Palletizer Robot (fanucamerica.com).

How many axes does the FANUC M-410iC/500 have?

4, per FANUC M-410iC/500 | 500 kg Payload Palletizer Robot (fanucamerica.com).

What is the IP rating of the FANUC M-410iC/500?

IP54, per FANUC M-410iC/500 | 500 kg Payload Palletizer Robot (fanucamerica.com).

FANUC M-410iC/500

The FANUC M-410iC/500 is a four-axis industrial robot for palletizing and material handling. It has a 500 kg payload, a 3143 mm reach, and a hollow wrist for cable routing. It is compatible with the FANUC R-30iB Plus A-Cabinet and B-Cabinet controllers and can use iRVision and ROBOGUIDE.

Source checked17/17 values · 2026-10-25

FANUC Industrial robot

Hover to measure reach

Payload

500kg

Reach

3,143mm

Repeatability

±0.05mm

IP rating

IP54

Axes

Specification

2 sources

Category	industrial robot
Power consumption	3 kW

Joints

Name	Max speed (°/s)
J1	85
J2	85
J3	85
J4	200

Quick answers

What is the payload of the FANUC M-410iC/500?: 500 kg, per FANUC M-410iC/500 | 500 kg Payload Palletizer Robot (fanucamerica.com).
What is the reach of the FANUC M-410iC/500?: 3143 mm, per FANUC M-410iC/500 | 500 kg Payload Palletizer Robot (fanucamerica.com).
What is the repeatability of the FANUC M-410iC/500?: ±0.05 mm, per FANUC M-410iC/500 | 500 kg Payload Palletizer Robot (fanucamerica.com).
How many axes does the FANUC M-410iC/500 have?: 4, per FANUC M-410iC/500 | 500 kg Payload Palletizer Robot (fanucamerica.com).
What is the IP rating of the FANUC M-410iC/500?: IP54, per FANUC M-410iC/500 | 500 kg Payload Palletizer Robot (fanucamerica.com).

Study notes

The robot has four controlled axes. The datasheet lists motion range as a single value per axis: J1 370°, J2 144°, J3 136°, and J4 720°; it does not give separate minimum and maximum limits.
The datasheet lists mechanical weight as 2410 kg (1910 kg in parentheses), while the product page states 1910 kg.
The hollow wrist allows cables to be routed through the robot wrist.
The controller can be housed within a pedestal or mounted separately as an independent unit.
FANUC iRVision and ROBOGUIDE offline programming software are named for this model.
Repeatability is based on ISO 9283 according to the datasheet.
FANUC's product page and datasheet give different values for weight. Check with FANUC before relying on it.