AutomationDirect Servo drive

Robots, CNC machines and PLCs: payload, reach, travels, joint limits

16 entries

AutomationDirect SV2A-2040SV2A-2040The SV2A-2040 is a SureServo2 AC servo drive rated 400 W, fed from 110/230 VAC single- or three-phase supply. It controls torque, velocity and position, accepting step/direction, CW/CCW, A/B quadrature, analog torque/velocity and internal indexing commands. It has one RS-485 (RJ45) port speaking Modbus RTU or Modbus ASCII as a slave, plus digital and analog I/O for machine integration.
AutomationDirect SV2A-2075SV2A-2075The AutomationDirect SV2A-2075 is a 750 W SureServo2 servo drive for 110/230 VAC single- or three-phase input. It controls torque, velocity, or position and communicates over one RS-485 port using Modbus RTU or Modbus ASCII. Optional EtherNet/IP and Modbus TCP cards can be added.
AutomationDirect SV2A-2150SV2A-2150The SV2A-2150 is a SureServo2 AC servo drive rated 1.5 kW with a nominal input of 110/230 VAC in single- or three-phase configuration. It controls torque, velocity and position, using step/direction, CW/CCW, A/B quadrature, internal indexing, or analog torque and velocity commands. It has one RS-485 (RJ45) port running Modbus RTU or Modbus ASCII slave at up to 115.2k baud, plus 10 discrete inputs, 6 discrete outputs and two analog input and output channels.
AutomationDirect SV2A-2200SV2A-2200The SV2A-2200 is a SureServo2 AC servo drive rated 2 kW, fed from 110/230 VAC single- or three-phase supply. It controls a servo motor in torque, velocity or position mode using step/direction, CW/CCW, A/B quadrature, internal indexing or analog commands. It has one RS-485 (RJ45) port speaking Modbus RTU or Modbus ASCII slave at up to 115.2k baud, plus discrete and analog I/O on board.
AutomationDirect SV2A-2300SV2A-2300The SV2A-2300 is a SureServo2 AC servo drive from AutomationDirect. It accepts 3-phase 230 VAC input, is rated 3 kW and 14.5 A, and controls torque, velocity or position. It has one RS-485 (RJ45) port for Modbus RTU or Modbus ASCII communication, and optional EtherNet/IP or Modbus TCP cards are available.
AutomationDirect SV2A-2550SV2A-2550The AutomationDirect SV2A-2550 is a SureServo2 servo drive rated 5.5 kW for 230 VAC three-phase input. It controls torque, velocity, and position and communicates over an RS-485 port using Modbus RTU or Modbus ASCII. It is intended for use with 4.5 kW and 5.5 kW servo systems and has an IP20 enclosure.
AutomationDirect SV2A-2750SV2A-2750The SV2A-2750 is a SureServo2 AC servo drive rated 7.5 kW with a 230 VAC three-phase input. It controls a servo motor in torque, velocity or position mode and accepts step/direction, CW/CCW, A/B quadrature, internal indexing and analog commands. It communicates over a single RS-485 (RJ45) port using Modbus RTU or Modbus ASCII.
AutomationDirect SV2A-2F00SV2A-2F00The SV2A-2F00 is a SureServo2 servo drive rated 15 kW at 230 VAC three-phase input. It provides torque, velocity, and position control with step/direction, CW/CCW, A/B quadrature, internal indexing, and analog command inputs. Communication is through one RS-485 (RJ45) port using Modbus RTU or Modbus ASCII, and optional EtherNet/IP and Modbus TCP cards are available.
AutomationDirect SV2A-4040SV2A-4040The SV2A-4040 is a SureServo2 series AC servo drive rated 400 W, fed from a 460 VAC three-phase supply. It controls a servo motor in torque, velocity or position mode, accepting step/direction, CW/CCW, A/B quadrature, internal indexing and analog command signals. It communicates over one RS-485 (RJ45) port using Modbus RTU or Modbus ASCII, and is configured by software or keypad.
AutomationDirect SV2A-4075SV2A-4075The SV2A-4075 is a SureServo2 AC servo drive rated 750 W with a 3-phase 460 VAC input. It controls a servo motor in torque, velocity or position mode and connects to a host over a single RS-485 (RJ45) port using Modbus RTU or Modbus ASCII. Optional EtherNet/IP and Modbus TCP cards can be added for other networks.
AutomationDirect SV2A-4150SV2A-4150The SV2A-4150 is a SureServo2 AC servo drive rated 1.5 kW with a 460 VAC three-phase input. It controls torque, velocity and position, and takes step/direction, CW/CCW, A/B quadrature, analog and internal indexing commands. It communicates over one RS-485 (RJ45) port using Modbus RTU or Modbus ASCII.
AutomationDirect SV2A-4200SV2A-4200The SV2A-4200 is a SureServo2 AC servo drive rated 2 kW with a 460 VAC three-phase input. It controls a servo motor in torque, velocity or position mode using step/direction, CW/CCW, A/B quadrature, analog or internal indexing commands. It communicates as a Modbus RTU or Modbus ASCII slave over one RS-485 RJ45 port, and optional EtherNet/IP and Modbus TCP cards can be added.
AutomationDirect SV2A-4300SV2A-4300The SV2A-4300 is a SureServo2 servo drive rated 3 kW with a 460 VAC three-phase input and a 9.9 A rating. It controls torque, velocity and position and produces SVPWM output, closing the loop on a 24-bit encoder. One RS-485 (RJ45) port provides Modbus RTU or Modbus ASCII slave communication at up to 115.2k baud.
AutomationDirect SV2A-4550SV2A-4550The SV2A-4550 is a SureServo2 AC servo drive rated 5.5 kW on a 460 VAC three-phase input, with a 16.8 A rating and SVPWM output. It controls a servo motor in torque, velocity or position mode using step/direction, CW/CCW, A/B quadrature, internal indexing, or analog torque and velocity commands. Setup is through software and a keypad, and it communicates over a single RS-485 port using Modbus RTU or Modbus ASCII.
AutomationDirect SV2A-4750SV2A-4750The SV2A-4750 is a SureServo2 servo drive rated 7.5 kW with a 460 VAC three-phase input. It communicates over an RS-485 RJ45 port using Modbus RTU or Modbus ASCII and supports torque, velocity and position control modes. Optional EtherNet/IP and Modbus TCP cards are available.
AutomationDirect SV2A-4F00SV2A-4F00The SV2A-4F00 is a SureServo2 AC servo drive rated 15 kW with a 460 VAC three-phase input. It controls torque, velocity and position, accepting step/direction, CW/CCW, A/B quadrature, internal indexing and analog command signals. It communicates over one RS-485 (RJ45) port using Modbus RTU or Modbus ASCII, and is intended for 11 kW and 15 kW systems.