What is the IP rating of the AutomationDirect SV2A-2200?

IP20, per Servo Drive: Modbus RTU and ASCII, 2 kW, 110/230 VAC, 1 and 3-phase (PN# SV2A-2200) | AutomationDirect (automationdirect.com).

AutomationDirect SV2A-2200

The SV2A-2200 is a SureServo2 AC servo drive rated 2 kW, fed from 110/230 VAC single- or three-phase supply. It controls a servo motor in torque, velocity or position mode using step/direction, CW/CCW, A/B quadrature, internal indexing or analog commands. It has one RS-485 (RJ45) port speaking Modbus RTU or Modbus ASCII slave at up to 115.2k baud, plus discrete and analog I/O on board.

Source checked10/10 values · 2026-10-26

AutomationDirect Servo drive

Rated power

2kW

IP rating

IP20

Specification

2 sources

Category	servo drive
Supply voltage	110/230 VAC, 1 and 3-phase
Feedback	24-bit (16777216 ppr) encoder
Output type	SVPWM output
Operating temp min	0 °C
Operating temp max	55 °C

Quick answers

What is the IP rating of the AutomationDirect SV2A-2200?: IP20, per Servo Drive: Modbus RTU and ASCII, 2 kW, 110/230 VAC, 1 and 3-phase (PN# SV2A-2200) | AutomationDirect (automationdirect.com).

Study notes

Command signals supported: step and direction, CW/CCW, A/B quadrature, internal indexing (via discrete input and communication port), and torque/velocity via analog input.
On-board I/O: 10 sinking/sourcing discrete inputs, 6 sinking/sourcing discrete outputs, 2 analog voltage inputs (+/- 10 VDC) and 2 analog voltage outputs (+/- 8 VDC).
Encoder output is provided; encoder resolution is 24-bit (16777216 ppr).
Tuning modes: easy/auto (4 methods) or manual; configuration by software and keypad.
Output type is SVPWM; intended for use with 2 kW systems.
Optional EtherNet/IP and Modbus TCP cards are available; Modbus TCP and EtherNet/IP are not built in.
Amperage rating: 18 A at 110 VAC 1-phase, 20.8 A at 230 VAC 1-phase, 11.4 A at 230 VAC 3-phase.
Internal protection functions listed: overcurrent, overvoltage, undervoltage, over-temperature, regeneration error, overload, velocity/position error, encoder error, secondary encoder position error, communication error, input phase loss and short circuit.
Enclosure is enclosed type, panel mounted.

Safety

A STO connector (AutomationDirect part SV2-CN10-STO) is supplied with the drive.
UL Listed, file E198015; no UL Recognized or UL Hazardous listing.
RoHS status: compliant (see CE declaration); EU REACH document provided.