What is the X-axis travel of the Makino UX6?

650 mm, per Related Content (makino.com).

Makino UX6

The Makino UX6 is a wire electrical discharge machining (EDM) machine with a stationary worktable and X, Y and Z linear axes plus U- and V-axis adjustment. It uses the Makino Hyper-i control with a 24-inch HD touchscreen and supports wire diameters from 0.100 mm to 0.300 mm. The machine cuts conductive workpieces using a wire electrode and dielectric fluid.

Source checked7/7 values · 2026-10-25

Makino CNC EDM

Travel X

650mm

Travel Y

450mm

Travel Z

420mm

Specification

1 source

Category	cnc edm
Table length	910 mm
Table width	710 mm
Table load	1,500 kg

Quick answers

What is the X-axis travel of the Makino UX6?: 650 mm, per Related Content (makino.com).

Study notes

U-axis and V-axis each have ±75 mm travel.
Maximum workpiece size is 1000 x 800 x 420 mm.
Work tank size is 1,070 mm x 880 mm.
Available wire diameters are 0.100, 0.150, 0.200, 0.250 and 0.300 mm.
Uses the Makino Hyper-i control with a 24-inch HD touchscreen.
Control operation follows a Program/Setup/Run sequence.
Hyper-i control includes a handbox, E-Tech Doctor help function, digital manuals and instructional videos.
HyperDrive Extreme Guide System provides jet-less wire threading.
Wire guides can be exchanged without vertical wire alignment and repeat to within 5 µm (0.0002 in).
Energizer contact plates use tool-less indexing.
Dielectric filters are in a non-submerged cabinet with a Filter Air-Purge function.
Dielectric reservoir is integrated into the base casting.