Machine Schema
Connect MCP

Makino EDAF2-FH

The EDAF2-FH is a Makino EDM machine that performs standard Ram EDM and precision EDM hole drilling. It has X, Y and Z travels of 350 mm, 250 mm and 350 mm and a table measuring 21.7 in by 13.8 in. It uses a programmable W-axis for hole drilling and a C-axis for indexing and continuous rotation.

Source checked7/7 values · 2026-10-25MakinoCNC EDM
X 350Y 250Z 350ALL DIMENSIONS mmEDAF2-FH · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
350mm
Travel Y
250mm
Travel Z
350mm

Specification

1 source
Categorycnc edm
Table length551.18 mm
Table width350.52 mm
Table load500 kg

Quick answers

What is the X-axis travel of the Makino EDAF2-FH?
350 mm, per EDM Hole Drilling (makino.com).

Study notes

  • Performs both standard Ram EDM and precision EDM hole drilling on one machine.
  • Uses traditional Ram EDM dielectric oil.
  • Programmable W-axis is independent but parallel to the Z-axis and carries the die guide and middle guide support components.
  • The W-axis middle guides support small-diameter electrodes and prevent vibration or bending during machining.
  • The W-axis arm can be removed and installed in less than a minute using quick disconnects and a rigid Curvic coupler.
  • Standard high-speed C-axis provides precision indexing and continuous rotation up to 2,000 rpm.
  • High-pressure pump is available with 6 MPa (870 psi) or 10 MPa (1,490 psi) capability.
  • Uses the Makino Hyper-i control with a 24-inch class high-definition touch screen.
  • Includes a programmable rise and fall work tank.
  • The dielectric reservoir is built into the base casting.
  • Chilled fluid is circulated through the Y-axis and Z-axis structures.

Safety

  • Equipped with a U/V flame sensor and fire extinguisher system for unattended operation.
↑↓ navigate↵ openesc close