Machine Schema
Connect MCP

Kitamura Jigcenter-5G

The Jigcenter-5G is a vertical 3-axis jig borer built on a double column bridge type design with box ways, intended for milling and boring of tight-tolerance parts. It uses a 4-step geared #40 spindle running up to 20,000 min-1, a 50-station tool storage, and linear scale feedback on the X, Y and Z axes. Positioning accuracy is stated as ±0.001 mm over full stroke with repeatability of ±0.0005 mm.

Source checked14/14 values · 2026-10-26KitamuraCNC mill
X 815Y 745Z 500SPINDLE 20,000 rpmNST No. 4050 TOOLSALL DIMENSIONS mmJigcenter-5G · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Repeatability
±0.0005mm
Travel X
815mm
Travel Y
745mm
Travel Z
500mm
Spindle max
20,000rpm

Specification

1 source
Categorycnc mill
Axes3
Spindle taperNST No. 40
Rapid traverse25 m/min
Tool capacity50
Table length1,200 mm
Table width780 mm
Supply voltage200 V AC, 3 Phase
FeedbackLinear scale feedback in X, Y, Z axes

Quick answers

What is the repeatability of the Kitamura Jigcenter-5G?
±0.0005 mm, per Jigcenter-5G J-Series Double Column Machining Center | Kitamura Machinery (kitamura-machinery.com).
How many axes does the Kitamura Jigcenter-5G have?
3, per Jigcenter-5G J-Series Double Column Machining Center | Kitamura Machinery (kitamura-machinery.com).
What is the maximum spindle speed of the Kitamura Jigcenter-5G?
20000 rpm, per Jigcenter-5G J-Series Double Column Machining Center | Kitamura Machinery (kitamura-machinery.com).
What is the X-axis travel of the Kitamura Jigcenter-5G?
815 mm, per Jigcenter-5G J-Series Double Column Machining Center | Kitamura Machinery (kitamura-machinery.com).

Study notes

  • Positioning accuracy is stated as ±0.001 mm (±0.000039 in) over full stroke.
  • Fine pitch ballscrews of 8 mm are used, with a ballscrew cooling system fitted as standard.
  • IAC System 1 (Intelligent Advanced Control) thermal compensation is standard.
  • SSS (Super Smooth Surface) control is stated with 8,190 block look-ahead.
  • Spindle is a 4-step gear driven, dual contact type with 20-20,000 min-1 range.
  • Tool storage capacity is 50 tools, with 100 tools available as an option.
  • HSK-A63 spindle taper is listed as an option to the standard NST No. 40.
  • Power requirement is 45 kVA at 200 V AC, 3 phase.
  • Machine control is the Arumatik-Mi, with touch-screen icon-driven interface; it is not in the controller reference list.
  • Construction is Meehanite cast iron with induction hardened solid box ways; the double column bridge design supports the Y-axis over full stroke.
  • Document text also refers to the machine as the Jigcenter-5.
↑↓ navigate↵ openesc close