Machine Schema
Connect MCP

FANUC R-2000iC/270F

The R-2000iC/270F is a six-axis industrial robot with a maximum load capacity at the wrist of 270 kg and a reach of 2655 mm, with a mechanical weight of 1320 kg. It is intended for spot welding, material handling and palletizing work in a small floor footprint. It is driven by FANUC R-30iB Plus controllers in A-Cabinet or B-Cabinet form.

Source checked20/20 values · 2026-10-25FANUCIndustrial robot
Hover to measure reach
R 2,6556-AXIS ARMREPEATABILITY ±0.05 mm01,0002,000mmR-2000iC/270F · SIDE ELEVATIONReach envelope to scale · pose schematic
Reach
2,655mm
Repeatability
±0.05mm
Axes
6
Weight
1,320kg

Specification

2 sources
Categoryindustrial robot
Power consumption2.5 kW

Joints

NameMax speed (°/s)
J1105
J290
J385
J4120
J5120
J6200

Quick answers

What is the reach of the FANUC R-2000iC/270F?
2655 mm, per FANUC R-2000iC/270F Robot | Heavy Payload Material Handling Robot (fanucamerica.com).
What is the repeatability of the FANUC R-2000iC/270F?
±0.05 mm, per FANUC R-2000iC/270F Robot | Heavy Payload Material Handling Robot (fanucamerica.com).
How many axes does the FANUC R-2000iC/270F have?
6, per FANUC R-2000iC/270F Robot | Heavy Payload Material Handling Robot (fanucamerica.com).
How much does the FANUC R-2000iC/270F weigh?
1320 kg, per FANUC R-2000iC/270F Robot | Heavy Payload Material Handling Robot (fanucamerica.com).

Study notes

  • Max load capacity at wrist is 270 kg; 300 kg is available with a hardware and/or software option.
  • Repeatability is ±0.05 mm, based on ISO 9283.
  • Total motion ranges: J1 370°, J2 136°, J3 312°, J4 720°, J5 250°, J6 720°.
  • Moment/inertia limits: J4 1730 N·m / 320 kg·m², J5 1730 N·m / 320 kg·m², J6 900 N·m / 230 kg·m².
  • Average power consumption is 2.5 kW.
  • Body protection is IP54 standard with IP56 optional; wrist and J3 arm protection is IP67.
  • Controller series is R-30iB Plus; compatible cabinets are the A-Cabinet and B-Cabinet.
  • The A-Cabinet supports up to 2 auxiliary axes.
  • FANUC's product page and datasheet give different values for payload. Check with FANUC before relying on it.
↑↓ navigate↵ openesc close