Machine Schema
Connect MCP

EMCO EMCOMAT FB-600 MC

The EMCOMAT FB-600 MC is a cycle-controlled universal milling machine with a swiveling vertical milling head and a horizontal milling spindle. Its work area travels are 600 mm in X and 400 mm in Y and Z, and it takes tools with a DIN 69871 SK 40 taper. It is intended for tool and mould making, prototype and small-series production, and training.

Source checked13/13 values · 2026-10-26EMCOCNC mill
X 600Y 400Z 400SPINDLE 5,000 rpm13 kWDIN 69871 SK 40ALL DIMENSIONS mmEMCOMAT FB-600 MC · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
600mm
Travel Y
400mm
Travel Z
400mm
Spindle max
5,000rpm
Spindle power
13kW

Specification

2 sources
Categorycnc mill
Axes3
Weight2,370 kg
Spindle taperDIN 69871 SK 40
Rapid traverse5 m/min
Table length800 mm
Table width400 mm
Table load300 kg

Quick answers

How many axes does the EMCO EMCOMAT FB-600 MC have?
3, per Konventionelle Fräsmaschine EMCOMAT FB-600 L (emco-world.com).
How much does the EMCO EMCOMAT FB-600 MC weigh?
2370 kg, per Konventionelle Fräsmaschine EMCOMAT FB-600 L (emco-world.com).
What is the maximum spindle speed of the EMCO EMCOMAT FB-600 MC?
5000 rpm, per Konventionelle Fräsmaschine EMCOMAT FB-600 L (emco-world.com).
What is the X-axis travel of the EMCO EMCOMAT FB-600 MC?
600 mm, per Konventionelle Fräsmaschine EMCOMAT FB-600 L (emco-world.com).

Study notes

  • Table data given for the rigid angle table: clamping area 800 x 400 mm, 8 T-grooves of 14 mm (H 8), maximum workpiece weight 300 kg. The vertical table measures 400 x 270 mm with 5 T-grooves and allows 450 kg.
  • Work feed in X/Y/Z is 10-2000 mm/min; feed force is 10/10/15 kN.
  • Vertical milling head has 80 mm quill travel and swivels +/-90 degrees; spindle clearance above table is 40-440 mm.
  • Horizontal milling spindle speed range is also 10-5000 rpm with 230-630 mm clearance above table.
  • Spindle motor rating is 9 kW at 100% duty and 13 kW at 40% duty; feed drive motor is 1 kW.
  • Coolant system: 40 litre tank with a maximum pump capacity of 25 l/min.
  • Overall dimensions are 2100 x 2190 x 1990 mm (L x W x H).
  • Machine is offered with Sinumerik 828D with "Manual Machine" operating area or Heidenhain TNC 620 control; neither control is in the reference list, so no controller id is given.
  • Changeover to horizontal milling uses a long milling arbor supported by an overarm that replaces the vertical milling head.

Safety

  • Retractable workspace guard with vertical clamping area and a large chip shield at the front of the machine for chip disposal.
  • Mechanical safety handwheels with scale rings are provided on the axes.
  • The swiveling vertical milling head is controlled by an end switch.
↑↓ navigate↵ openesc close