What is the X-axis travel of the DMG MORI WASINO G 100M | 480?

480 mm, per WASINO G 100M | 480 - DMG MORI (en.dmgmori.com).

DMG MORI WASINO G 100M | 480

The WASINO G 100M | 480 is a flat-tooling turning centre (lathe) with a 480 mm X-axis stroke and a 285 mm Z-axis stroke. It accepts workpieces up to 285 mm in diameter and 280 mm in length, and bar stock up to 38 mm in diameter. It is built on a cast iron bed with a low centre of gravity, symmetrical about the spindle centre, with induction-hardened horizontal slideways integrated in the bed.

Source checked6/6 values · 2026-10-25DMG MORI CNC lathe

Travel X

480mm

Travel Z

285mm

Specification

1 source

Category	cnc lathe
Max turning diameter	285 mm
Max turning length	280 mm
Bar capacity	38 mm

Quick answers

What is the X-axis travel of the DMG MORI WASINO G 100M | 480?: 480 mm, per WASINO G 100M | 480 - DMG MORI (en.dmgmori.com).

Study notes

X-axis stroke 480 mm, Z-axis stroke 285 mm; the 480 in the model designation corresponds to the X-axis stroke.
Bed is cast iron with a low centre of gravity; the machine structure is symmetrical about the spindle centre, a layout typical of flat-tooling turning centres.
Horizontal slideways are induction-hardened and integrated into the bed.
A pre-tension structure is used to suppress thermal displacement and improve positioning accuracy.
The document quotes thermal displacement at cold start of ø2.0 μm and circularity of 0.5 μm for the G 100 | 300 variant.
Control is listed only as "Fanuc"; no specific FANUC controller model is given.