DMG MORI WASINO G 100 | 480

The WASINO G 100 | 480 is a turning center with a maximum workpiece diameter of 285 mm and a maximum workpiece length of 280 mm. It has a maximum bar capacity diameter of 38 mm and X- and Z-axis strokes of 480 mm and 285 mm. The document lists Fanuc as a control and software alternative.

Source checked6/6 values · 2026-10-25DMG MORI CNC lathe

Travel X

480mm

Travel Z

285mm

Specification

1 source

Category	cnc lathe
Max turning diameter	285 mm
Max turning length	280 mm
Bar capacity	38 mm

Quick answers

What is the X-axis travel of the DMG MORI WASINO G 100 | 480?: 480 mm, per WASINO G 100 | 480 - DMG MORI (en.dmgmori.com).

Study notes

The document names Fanuc as the control and software alternative, without a specific controller model.
Thermal displacement at cold start is stated as ø 2.0 μm for the G 100 | 300 variant, with circularity 0.5 μm.
The machine uses a rigid bed with low center of gravity, a symmetrical structure about the spindle center, cast iron construction, and induction-hardened horizontal slideways integrated on the bed.