Machine Schema
Connect MCP

Brother W1000Xd2-5AX

The Brother W1000Xd2-5AX is a 5-axis vertical machining center with a BT30 spindle. It has X/Y/Z travels of 1000/500/380 mm, a 1100 x 500 mm table, and simultaneous 5-axis control for complex parts. The standard spindle reaches 12,000 min⁻¹, with optional 20,000 min⁻¹ and 10,000 min⁻¹ high-torque spindles.

Source checked16/16 values · 2026-10-25BrotherCNC mill
X 1,000Y 500Z 380SPINDLE 12,000 rpmMAS-BT3028 TOOLSALL DIMENSIONS mmW1000Xd2-5AX · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Repeatability
±0.004mm
Travel X
1,000mm
Travel Y
500mm
Travel Z
380mm
Spindle max
12,000rpm

Specification

1 source
Categorycnc mill
Axes5
Weight3,350 kg
Spindle taperMAS-BT30
Rapid traverse56 m/min
Tool capacity28
Table length1,100 mm
Table width500 mm
Table load500 kg
Supply voltageAC 200 to 230 V ±10%, 3-phase, 50/60 Hz ±2%

Quick answers

What is the repeatability of the Brother W1000Xd2-5AX?
±0.004 mm, per W1000Xd2-5AX | Machine Tools | Brother (machinetool.global.brother).
How many axes does the Brother W1000Xd2-5AX have?
5, per W1000Xd2-5AX | Machine Tools | Brother (machinetool.global.brother).
How much does the Brother W1000Xd2-5AX weigh?
3350 kg, per W1000Xd2-5AX | Machine Tools | Brother (machinetool.global.brother).
What is the maximum spindle speed of the Brother W1000Xd2-5AX?
12000 rpm, per W1000Xd2-5AX | Machine Tools | Brother (machinetool.global.brother).
What is the X-axis travel of the Brother W1000Xd2-5AX?
1000 mm, per W1000Xd2-5AX | Machine Tools | Brother (machinetool.global.brother).

Study notes

  • CNC model is CNC-D00v (DB); conversation-language programming is not available on the 5AX variant.
  • Control axes: 5 (X, Y, Z and two additional axes); simultaneous interpolation covers 5 axes.
  • Standard spindle speed is 12,000 min⁻¹; optional spindles are 20,000 min⁻¹ and 10,000 min⁻¹ high-torque.
  • Rapid traverse rates are X 50 m/min, Y 50 m/min, Z 56 m/min.
  • Tool storage capacity options are 14, 21, or 28 tools.
  • Table load capacity is 300 kg standard and 500 kg with a parameter setting change.
  • Maximum tool weight is 3.0 kg standard (4.0 kg with parameter change); maximum tool length 250 mm; maximum tool diameter ø110 mm.
  • Machine height is 2633 mm; required floor space is 2410 x 2233 mm (3071 mm with control unit door open).
  • Positioning accuracy (ISO230-2:1988) is 0.006–0.020 mm.
  • Spindle motor output for the 12,000 min⁻¹ specification is 10.1 kW for 10 min / 7.0 kW continuous; maximum output is 18.9 kW.
  • Coolant Through Spindle (CTS) is optional at 3 MPa or 7 MPa; BT dual contact spindle (BIG-PLUS) is optional.
  • Optional network slaves include PROFINET, EtherNet/IP, PROFIBUS DP, DeviceNet, and CC-Link; OPC UA is listed as standard.

Safety

  • Parameter setting changes are required to use the 500 kg table load or the 4.0 kg maximum tool weight.
  • Regular air pressure must be 0.4–0.6 MPa (recommended 0.5 MPa) with required flow 45 L/min; set pressure higher than the recommended value as needed.
  • Maximum tool length, diameter, and weight are limited by spindle speed, machine configuration, and tool center of gravity; the published figures are for reference only.
  • A relocation detection device may be required depending on the destination; machines equipped with it have 'RD' at the end of the model name.
↑↓ navigate↵ openesc close