Machine Schema
Connect MCP

Brother S700Xd2-5AX/100T

The Brother S700Xd2-5AX/100T is a vertical machining center in the SPEEDIO series with simultaneous 5-axis capability and a 100-tool storage system. It has 700 mm X, 450 mm Y, and 380 mm Z travels, an 800 mm x 450 mm table, and a 12,000 min-1 spindle. It uses the CNC-D00v(DB) control and is intended for multi-face and high-mix small-lot machining.

Source checked16/16 values · 2026-10-25BrotherCNC mill
X 700Y 450Z 380SPINDLE 12,000 rpmMAS-BT30100 TOOLSALL DIMENSIONS mmS700Xd2-5AX/100T · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Repeatability
±0.004mm
Travel X
700mm
Travel Y
450mm
Travel Z
380mm
Spindle max
12,000rpm

Specification

1 source
Categorycnc mill
Axes5
Weight2,700 kg
Spindle taperMAS-BT30
Rapid traverse56 m/min
Tool capacity100
Table length800 mm
Table width450 mm
Table load250 kg
Supply voltageAC 200 to 230 V±10%, 3-phase, 50/60Hz±2%

Quick answers

What is the repeatability of the Brother S700Xd2-5AX/100T?
±0.004 mm, per S700Xd2-5AX/100T | Machine Tools | Brother (machinetool.global.brother).
How many axes does the Brother S700Xd2-5AX/100T have?
5, per S700Xd2-5AX/100T | Machine Tools | Brother (machinetool.global.brother).
How much does the Brother S700Xd2-5AX/100T weigh?
2700 kg, per S700Xd2-5AX/100T | Machine Tools | Brother (machinetool.global.brother).
What is the maximum spindle speed of the Brother S700Xd2-5AX/100T?
12000 rpm, per S700Xd2-5AX/100T | Machine Tools | Brother (machinetool.global.brother).
What is the X-axis travel of the Brother S700Xd2-5AX/100T?
700 mm, per S700Xd2-5AX/100T | Machine Tools | Brother (machinetool.global.brother).

Study notes

  • CNC unit is CNC-D00v(DB) on the 5AX models; conversation language is not available.
  • The 100-tool magazine uses a 28-tool turret plus left and right 36-tool stockers.
  • Turret magazine tool change is 0.7 s tool-to-tool and 1.4 s chip-to-chip; tool stocker handling is about 5 s for one tool and about 140 s for all 28 tools.
  • Rapid traverse is 50 m/min in X and Y and 56 m/min in Z; the spec field holds the fastest value.
  • Optional spindle specifications are 10,000 min-1 high-torque and 20,000 min-1.
  • Required floor space is 2,050 x 2,081 mm; machine height is 2,568 mm.
  • Power supply is AC 200-230 V ±10%, 3-phase, 50/60 Hz ±2%; continuous power capacity is 10.4 kVA.
  • Air supply is 0.4-0.6 MPa at 40 L/min.
  • Bidirectional positioning accuracy is 0.006-0.020 mm (ISO 230-2:1988); repeatability is less than 0.004 mm (ISO 230-2:2014).
  • Tool shank is MAS-BT30 with MAS-P30T-2 pull stud; BT dual contact (BIG-PLUS) and CTS are optional.
  • OPC UA is available; PROFINET and EtherNet/IP slave are optional.
  • Table load is 250 kg standard; 400 kg requires parameter adjustment.

Safety

  • A side shutter for robotic loading/unloading requires a safety fence and cannot be selected for the S300Xd2.
  • Depending on destination, the machine may need a relocation detection device; such models carry the RD suffix.
  • The 27,000 min-1 spindle specification cannot be combined with Z-axis 380 mm models, and CTS cannot be selected with 27,000 min-1.
  • Max tool weight 4.0 kg is not available with the 27,000 min-1 specification.
↑↓ navigate↵ openesc close