Machine Schema
Connect MCP

Brother S700Xd1

The Brother S700Xd1 is a CNC machining center with X/Y/Z travels of 700/450/300 mm. It uses the CNC-D00 controller and a 10,000 min-1 spindle, and supports 14-, 21-, or 28-tool storage. It performs milling, drilling, and tapping operations on metal workpieces.

Source checked16/16 values · 2026-10-25BrotherCNC mill
X 700Y 450Z 300SPINDLE 10,000 rpmMAS-BT30ALL DIMENSIONS mmS700Xd1 · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
700mm
Travel Y
450mm
Travel Z
300mm
Spindle max
10,000rpm
Axes
5

Specification

1 source
Categorycnc mill
Weight2,550 kg
Spindle taperMAS-BT30
Rapid traverse56 m/min
Table length800 mm
Table width400 mm
Table load400 kg
Supply voltageAC 200 to 230 V ±10%, 3-phase, 50/60 Hz ±2%

Quick answers

How many axes does the Brother S700Xd1 have?
5, per S700Xd1 | Machine Tools | Brother (machinetool.global.brother).
How much does the Brother S700Xd1 weigh?
2550 kg, per S700Xd1 | Machine Tools | Brother (machinetool.global.brother).
What is the maximum spindle speed of the Brother S700Xd1?
10000 rpm, per S700Xd1 | Machine Tools | Brother (machinetool.global.brother).
What is the X-axis travel of the Brother S700Xd1?
700 mm, per S700Xd1 | Machine Tools | Brother (machinetool.global.brother).

Study notes

  • CNC unit is CNC-D00 for S700Xd1; the S700Xd1-5AX uses CNC-D00v (DB).
  • Tool storage capacities are 14, 21, or 28 tools.
  • Tool change times are 0.6 s tool-to-tool and 1.2 s chip-to-chip with 14/21 tools; 0.7 s and 1.3 s with 28 tools.
  • Spindle options: 16,000 min-1, 27,000 min-1, and 10,000 min-1 high-torque.
  • Rapid traverse rates are X 50 m/min, Y 50 m/min, Z 56 m/min.
  • Bidirectional axis positioning accuracy is 0.006–0.020 mm; repeatability is less than 0.004 mm (ISO 230-2).
  • Main spindle motor output for the 10,000 min-1 specification is 10.1 kW (10 min) / 7.1 kW (continuous).
  • Required floor space is 2,050 × 2,026 mm; 2,864 mm depth with control unit door open; machine height is 2,498 mm.
  • Table work area is 800 × 400 mm; standard maximum load is 250 kg, with 400 kg available after parameter change.
  • Memory capacity is 500 MB, with 3 GB optional; up to 4,000 programs can be registered (total program and data bank).
  • OPC UA is listed; PROFINET slave and EtherNet/IP slave are optional.
  • Simultaneous 5-axis functions on S700Xd1-5AX include tool center point control with 1,000-block look-ahead, submicron command, fixture coordinates setting, and 3 GB memory.

Safety

  • Max. table loading capacity is 250 kg as standard; 400 kg requires parameter change, and acceleration and positioning speed also change.
  • Max. tool weight is 3.0 kg as standard; 4.0 kg requires parameter setting change, and tool magazine indexing time changes. Total tool weight limit is 25 kg for 14 tools and 35 kg for 21 or 28 tools.
  • Coolant Through Spindle (CTS) cannot be selected for 27,000 min-1 specification models.
  • Regular air pressure is 0.4–0.6 MPa (recommended 0.5 MPa); set pressure higher than recommended depending on machine specifications, machining program, or peripheral equipment.
  • Relocation detection device may be required depending on destination; machines with it carry the RD suffix.
↑↓ navigate↵ openesc close