ManufacturerDN Solutions
- DN Solutions PUMA TL2500XLMPUMA TL2500XLMThe DN Solutions PUMA TL2500XLM is a horizontal turning center with upper and lower turrets for simultaneous 4-axis machining. It is intended for shaft work such as camshafts and crankshafts. It has a 10-inch chuck, a maximum turning length of 1250 mm, a 4000 r/min spindle and 26 kW spindle power.
- DN Solutions SMX 2100STSMX 2100STThe DN Solutions SMX 2100ST is a multitasking turning center with two spindles and a B-axis milling function. It has an 8-inch chuck, a maximum turning diameter of 600 mm and a maximum turning length of 1040 mm. Both left and right spindles reach 5000 r/min with 22 kW of power.
- DN Solutions SMX 5100LBSMX 5100LBThe SMX 5100LB is a multitasking mill-turn turning centre in DN Solutions' SMX series, listed with a 21-inch chuck. It turns parts up to 830 mm in diameter and 3050 mm in length, using a left spindle rated at 1500 r/min, 37 kW and 4200 N·m. The SMX series combines left and right spindles, a B-axis milling function and a lower turret for complex machining.
- DN Solutions SMX2100SMX2100The DN Solutions SMX2100 is a multitasking mill-turn turning centre listed in the SMX series. It has an 8 inch chuck, a maximum turning diameter of 600 mm and a maximum turning length of 1040 mm. Its left spindle runs up to 5000 r/min with 22 kW and 467 N·m of torque, and the machine weighs 14,900 kg.
- DN Solutions SMX2100BSMX2100BThe DN Solutions SMX2100B is a multi-axis mill-turn machine in the SMX series, fitted with a 10 inch chuck on the left spindle. It turns parts up to 600 mm in diameter and 1040 mm in length, and combines left and right spindle work with B-axis milling and a lower turret for complex parts in one setup. Its 12-station servo turret and B-axis/C-axis control allow turning and milling operations without re-clamping.
- DN Solutions SMX2100SSMX2100SThe DN Solutions SMX2100S is a two-spindle mill-turn CNC machine in the SMX series. It has an 8-inch chuck, a maximum turning diameter of 600 mm and a maximum turning length of 1040 mm. Both left and right spindles are rated at 5000 rpm and 22 kW.
- DN Solutions SMX2100SBSMX2100SBThe SMX2100SB is a multitasking mill-turn turning centre in the DN Solutions SMX series. It combines left and right spindles with a B-axis milling function and a lower turret to machine complex parts in a single setup. It has a 10 inch chuck, a maximum turning diameter of 600 mm and a maximum turning length of 1040 mm.
- DN Solutions SMX2100STBSMX2100STBThe SMX2100STB is a multi-axis mill-turn machine in the DN Solutions SMX series, combining a left and a right spindle with B-axis milling and a lower turret so a part can be turned and milled in one setup. It takes a 10 inch chuck, turns up to 600 mm in diameter and 1040 mm in length, and weighs 15900 kg. Both spindles are rated 22 kW, the left at 4000 r/min and 512 N·m and the right at 5000 r/min and 467 N·m.
- DN Solutions SMX2600SMX2600The DN Solutions SMX2600 is a multitasking turning centre in the SMX series, fitted with a 10-inch chuck. It turns workpieces up to 660 mm in diameter and 1540 mm in length, and its left spindle reaches 4000 r/min with 30 kW and 724 N·m. The SMX series combines left and right spindles, B-axis milling and a lower turret for multi-axis mill-turn work.
- DN Solutions SMX2600SSMX2600SThe DN Solutions SMX2600S is a multi-axis mill-turn machine with left and right spindles, a B-axis milling function, and a lower turret. It has a 10-inch chuck, a maximum turning diameter of 660 mm, and a maximum turning length of 1540 mm. It performs multi-task machining of complex parts.
- DN Solutions SMX2600STSMX2600STThe DN Solutions SMX2600ST is a mill-turn turning center in the SMX series with two opposed spindles, a 10-inch chuck on each, and a B-axis milling function plus a lower turret. It machines parts up to 660 mm in turning diameter and 1540 mm in turning length, with a left spindle rated 4000 r/min and 30 kW. It is intended for complex parts that combine turning and milling in one setup.
- DN Solutions SMX3100SMX3100The DN Solutions SMX3100 is a multitasking turning center in the SMX series. It has a 12-inch chuck, a maximum turning diameter of 660 mm and a maximum turning length of 1540 mm. The left spindle runs up to 3000 r/min at 30 kW, and series features include B-axis milling and a lower turret for complex machining.
- DN Solutions SMX3100LSMX3100LThe DN Solutions SMX3100L is a multi-axis mill-turn turning centre fitted with a 12-inch chuck. It machines parts up to 660 mm in diameter and 2540 mm in length, with a left spindle rated at 3000 r/min and 30 kW. A B-axis milling function and a servo turret allow turning and milling operations on the same machine.
- DN Solutions SMX3100LSSMX3100LSThe DN Solutions SMX3100LS is a multi-axis mill-turn CNC turning center in the SMX series. It has left and right spindles, a B-axis milling function, and a lower turret, with a 12-inch chuck, 660 mm maximum turning diameter, and 2540 mm maximum turning length.
- DN Solutions SMX3100SSMX3100SThe DN Solutions SMX3100S is a multi-axis mill-turn machine from the SMX series. It has a 12-inch chuck, a maximum turning diameter of 660 mm and a maximum turning length of 1540 mm. The left spindle reaches 3000 r/min at 30 kW and 1203 N·m; the right spindle reaches 4000 r/min at 30 kW and 724 N·m.
- DN Solutions SMX3100STSMX3100STThe DN Solutions SMX3100ST is a multi-axis mill-turn machine in the SMX series. It combines left and right spindles with B-axis milling and a lower turret for complex turning and milling work. It has a 12-inch chuck, a maximum turning diameter of 660 mm, and a maximum turning length of 1540 mm.
- DN Solutions SMX5100LSMX5100LThe DN Solutions SMX5100L is a multi-axis mill-turn machine in the SMX series. The specification table lists a 15-inch chuck, an 830 mm maximum turning diameter, a 3050 mm maximum turning length, and a left spindle rated at 2400 r/min and 37 kW. The SMX series is described as using combined turning and milling functions for complex machining.
- DN Solutions SMX5100LSSMX5100LSThe SMX5100LS is a multi-axis mill-turn turning center with two spindles and a 15 inch chuck. It turns parts up to 830 mm in diameter and 3050 mm in length, with each spindle rated at 2400 r/min and 37 kW. The machine combines left and right spindles, a B-axis milling function and a lower turret for machining complex parts in one setup.
- DN Solutions SMX5100LSBSMX5100LSBThe DN Solutions SMX5100LSB is a multi-axis mill-turn machine in the SMX series, with a 21 inch chuck on both the left and right spindles. It turns parts up to 830 mm in diameter and 3050 mm in length. Each spindle runs to 1500 r/min with 37 kW of power and 4200 N·m of torque.
- DN Solutions SMX5100XLSMX5100XLThe SMX5100XL is a multi-axis mill-turn machine in the DN Solutions SMX series, combining turning with B-axis milling capability. It has a 15 inch chuck, a maximum turning diameter of 830 mm and a maximum turning length of 4070 mm, with a left spindle rated at 2400 r/min and 37 kW. The series uses left and right spindles, a B-axis milling function and a lower turret for complex, high-precision machining.
- DN Solutions SMX5100XLBSMX5100XLBThe SMX5100XLB is a multi-axis mill-turn machine in the DN Solutions SMX series, listed with a 21-inch chuck, a maximum turning diameter of 830 mm and a maximum turning length of 4070 mm. Its left spindle runs up to 1500 r/min and is rated 37 kW with 4200 N·m of torque. The machine weighs 39000 kg.