DMG MORI CNC grinder

Robots, CNC machines and PLCs: payload, reach, travels, joint limits

13 entries

DMG MORI CVG 13CVG 13The CVG 13 is a CNC vertical multi-process grinding machine manufactured by DMG MORI. It has a 1,350 mm swing diameter, accepts workpieces up to 700 mm high and 600 mm long, and supports grinding diameters up to 1,300 mm. The work spindle reaches 100 rpm and the grinding spindle reaches 9,000 rpm; control and software alternatives include FANUC.
DMG MORI IGH-10NTIGH-10NTThe IGH-10NT is a CNC internal grinding machine for grinding bores and related surfaces on workpieces up to 1,000 mm long. A turret-type wheelhead carries one internal and one external grinding spindle, so internal, external, face and taper grinding can be done in a single clamping. The headstock swivels under NC command with a 0.0001° setting unit for taper grinding.
DMG MORI IGH-2NTIGH-2NTThe DMG MORI IGH-2NT is a CNC internal grinding machine. Its swing diameter is 300 mm, and its work spindle runs up to 900 rpm. A turret-type wheelhead carries one internal and one external grinding spindle for internal, external, face, and taper grinding in one clamping.
DMG MORI IGH-7NTIGH-7NTThe IGH-7NT is a CNC internal grinding machine for precision bore, face and taper grinding. A turret-type wheelhead carries one internal and one external grinding spindle, so ID, OD, face and taper grinding can be done in a single clamping. An NC swivel table on the headstock, set in 0.0001° increments by NC command, is standard equipment for taper grinding.
DMG MORI IGS-4NTIGS-4NTThe IGS-4NT is an internal grinding machine intended for grinding spindle workpieces. It swings workpieces up to 400 mm in diameter and takes workpieces up to 400 mm long. A turret-type wheelhead carries four grinding spindles as standard, and the headstock has an NC-controlled swivel setting unit.
DMG MORI IGT-8NIGT-8NThe IGT-8N is an internal grinding machine intended for grinding spindle workpieces. It has a swing diameter of 450 mm, a maximum grinding diameter of 250 mm and a maximum grinding length of 300 mm, and it accepts workpieces up to 800 mm long. Four grinding spindles are mounted on a turret-type wheelhead so internal, external, face and taper grinding can be done in one chucking.
DMG MORI NVGH-12TNVGH-12TThe NVGH-12T is a CNC vertical multi-process grinding machine built as a single-spindle unit with an HSK-A125 grinding spindle carried on a turret with a continuous-indexing B-axis. It grinds workpieces up to 1,200 mm in diameter, 700 mm high and 600 mm long, with a work spindle running up to 200 rpm and a grinding spindle up to 6,000 rpm. Options include a turning spindle for hard turning, a direct-drive C-axis on the work spindle for non-round grinding, an 8-tool ATC for the internal grinding spindle, and automation such as a SCARA robot, rotary stocker or pallet changer.
DMG MORI NVGH-22TNVGH-22TThe NVGH-22T is a vertical multi-process CNC grinding machine. The workpiece sits vertically, with a swing diameter of 2,250 mm and a maximum grinding diameter of 2,200 mm, and grinding is performed by a single HSK-A125 grinding spindle mounted on a turret with a continuously indexing B-axis. An optional turning spindle allows hard turning for stock removal, and an optional direct-drive C-axis on the work spindle enables non-round grinding.
DMG MORI NVGH-3TNVGH-3TThe NVGH-3T is a CNC vertical multi-process grinding machine. Two grinding spindles are mounted on a turret with a continuous-indexing B-axis: an internal grinding spindle with HSK-A63 interface and automatic tool change, and an external grinding spindle with a 355 mm grinding wheel. It handles workpieces up to 350 mm swing diameter, 450 mm height and 320 mm grinding length, with a grinding spindle speed of up to 20,000 rpm.
DMG MORI NVGH-6TNVGH-6TThe DMG MORI NVGH-6T is a CNC vertical multi-process grinding machine that performs internal and external grinding. It has a turret with a continuous-indexing B-axis carrying two grinding spindles, and its work area accepts a 650 mm swing diameter and a 500 mm workpiece height. Optional functions include hard turning, a C-axis work spindle, automatic tool changing, and automation with a SCARA robot.
DMG MORI TKV 60TKV 60The TKV 60 is a CNC vertical multi-process grinding machine that grinds internal diameters, external diameters and faces in a single chucking. It uses a speedMASTER wheel spindle rated 18.5 kW at up to 18,000 rpm and a work spindle that turns up to 350 rpm. An automatic tool changer holds six tools, and the machine is offered with FANUC control and the ERGOline X operator interface.
DMG MORI TKV 85TKV 85The DMG MORI TKV 85 is a vertical CNC multi-process grinding machine that grinds internal diameters, outer diameters and faces in a single chucking. Its single wheel spindle uses an HSK-E100 interface, delivers 18.5 kW and reaches 10,000 rpm, and a 6-tool ATC changes grinding tools automatically. The work spindle turns up to 200 rpm and the machine accepts workpieces up to 850 mm swing diameter.
DMG MORI Vertical Mate 125Vertical Mate 125The Vertical Mate 125 is a CNC vertical multi-process grinding machine from DMG MORI. It grinds internal diameters, outer diameters and faces in a single chucking, with an automatic tool changer holding six tools. It takes workpieces up to 600 mm high and up to 1200 mm in grinding diameter.