Machine Schema
Connect MCP

Makino T2

The Makino T2 is a five-axis horizontal machining center with 2,000 mm X, 2,000 mm Y and 1,800 mm Z travels on a 1,000 mm x 1,250 mm pallet. Its spindle runs at 4,000 rpm and is rated 100 kW / 1,000 Nm continuous, and it carries a 120-tool automatic tool changer (190 tools optional). It is intended for milling titanium and titanium-alloy aerospace parts such as edge frames, pylons and bulkheads.

Source checked17/17 values · 2026-10-25MakinoCNC mill
X 2,000Y 2,000Z 1,800SPINDLE 4,000 rpm100 kW120 TOOLSALL DIMENSIONS mmT2 · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
2,000mm
Travel Y
2,000mm
Travel Z
1,800mm
Spindle max
4,000rpm
Spindle power
100kW

Specification

1 source
Categorycnc mill
Axes5
Rapid traverse16 m/min
Tool capacity120
Table length1,000 mm
Table width1,250 mm
Table load5,000 kg

Joints

NameRange min (°)Range max (°)
A-110110
B
C

Quick answers

How many axes does the Makino T2 have?
5, per Horizontal Machining 5-Axis (makino.com).
What is the maximum spindle speed of the Makino T2?
4000 rpm, per Horizontal Machining 5-Axis (makino.com).
What is the X-axis travel of the Makino T2?
2000 mm, per Horizontal Machining 5-Axis (makino.com).

Study notes

  • A-axis travels +/- 110 degrees; B-axis and C-axis rotate 360 degrees infinitely, so no finite range is stated for them.
  • Maximum workpiece size is ø1,900 mm x 2,000 mm.
  • Cutting feedrate matches rapid traverse at 16,000 mm/min (630 ipm).
  • ATC holds 120 tools standard or 190 tools optional; tool-to-tool time 20 s, chip-to-chip 40 s.
  • Maximum tool diameter 300 mm and maximum tool weight 30 kg.
  • Through-spindle coolant is specified at 7 MPa @ 200 L/min; nozzle coolant at 1.5 MPa @ 50 L/min.
  • Spindle rating given as 4,000 rpm at 100 kW / 1,000 Nm continuous (133 HP / 738 ft-lbs in the imperial table).
  • Machine features an Active Dampening System, rigid construction and a high-pressure, high-flow coolant system for titanium milling.
  • Pallet size in the imperial table is 39.4" x 49.2".
  • Tool holder interface (spindle taper), machine weight and positioning repeatability are not stated in the document.
↑↓ navigate↵ openesc close