What is the maximum spindle speed of the Makino L2 APC?

16000 rpm, per L2 APC (makino.com).

What is the X-axis travel of the Makino L2 APC?

400 mm, per L2 APC (makino.com).

Makino L2 APC

The Makino L2 APC is a vertical 3-axis machining center built for high-volume machining of small parts. It uses a 16,000 rpm HSK-A50 spindle with a 15-tool magazine (30-tool magazine optional) and a 120 mm diameter rotary A-axis table, so milling, drilling and tapping operations can run with automatic tool changes and part indexing. The machine has 400 x 300 x 300 mm linear travels and a 48 m/min rapid traverse rate, and its compact footprint allows it to be placed in manual or robot-fed part flow arrangements.

Source checked11/11 values · 2026-10-25

Makino CNC mill

Travel X

400mm

Travel Y

300mm

Travel Z

300mm

Spindle max

16,000rpm

Spindle power

14.914kW

Specification

1 source

Category	cnc mill
Axes	3
Spindle taper	HSK-A50
Rapid traverse	48 m/min
Tool capacity	15
Table load	300 kg

Quick answers

How many axes does the Makino L2 APC have?: 3, per L2 APC (makino.com).
What is the maximum spindle speed of the Makino L2 APC?: 16000 rpm, per L2 APC (makino.com).
What is the X-axis travel of the Makino L2 APC?: 400 mm, per L2 APC (makino.com).

Study notes

Vertical 3-axis machining center with an additional rotary A-axis table stated as 120 mm diameter; A-axis resolution is given as 0.001° (no travel range is stated).
Linear travels are X 400 mm, Y 300 mm, Z 300 mm; the document gives an imperial duplicate listing of X 15.7 in, Y 11.8 in, Z 11.8 in.
Spindle is rated 16,000 rpm and 20 HP; an 8,000 rpm HSK-A50 spindle is offered as an option.
Standard ATC capacity is 15 tools in HSK-A50; a 30-tool magazine is optional.
Maximum tool diameter is 30 mm for adjacent pockets and 80 mm when adjacent pockets are empty (1.18 in / 3.14 in); maximum tool weight is 5 kg (11 lbs).
Chip-to-chip time is stated as 3.5 to 4.5 seconds.
Maximum workpiece envelope is 600 x 400 x 500 mm (39.4 in x 19.7 in x 17.7 in).
Cutting feedrate is listed at 48 m/min, the same value as rapid traverse.
Control is the Makino Professional L Control, which does not match any controller entry in the reference list.
Standard features include a 400 L coolant tank, right/rear discharge LUCC, 210 psi through-spindle coolant, overhead and nozzle coolant, coolant temperature controller, automatic grease supply, air dryer and a 3-layer signal light.
Program capacity is stated as 1,280 m of part program storage, 400 part programs, 400 tool offsets, 48 work coordinate pairs and custom macro with 700 variables.
Machine footprint is stated as 3 feet wide by 7 feet deep.