Machine Schema
Connect MCP

Makino D800Z (40 Taper)

The Makino D800Z (40 Taper) is a vertical machining center with five axes: X, Y, Z, B, and C. It uses a CAT40 spindle and a 40-tool magazine to mill workpieces, and its table accepts loads up to 1,200 kg. Linear travels are 1,200 mm in X, 1,100 mm in Y, and 650 mm in Z.

Source checked14/14 values · 2026-10-25MakinoCNC mill
X 1,200Y 1,100Z 650SPINDLE 14,000 rpmCAT4040 TOOLSALL DIMENSIONS mmD800Z (40 Taper) · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
1,200mm
Travel Y
1,100mm
Travel Z
650mm
Spindle max
14,000rpm
Axes
5

Specification

1 source
Categorycnc mill
Spindle taperCAT40
Rapid traverse36 m/min
Tool capacity40
Table load1,200 kg

Joints

NameRange min (°)Range max (°)
B-1800
C

Quick answers

How many axes does the Makino D800Z (40 Taper) have?
5, per D800Z (40 Taper) (makino.com).
What is the maximum spindle speed of the Makino D800Z (40 Taper)?
14000 rpm, per D800Z (40 Taper) (makino.com).
What is the X-axis travel of the Makino D800Z (40 Taper)?
1200 mm, per D800Z (40 Taper) (makino.com).

Study notes

  • Table diameter is 800 mm.
  • Optional HSK-A63 spindle is available at 20,000 rpm.
  • Optional tool magazine capacity is 80 tools.
  • Tool-to-tool time is 3 s; chip-to-chip time is 9 s.
  • Machine dimensions are 3,200 mm x 5,070 mm x 3,600 mm.
  • Cutting feedrate is 36,000 mm/min.
  • SGI.5 software is Makino's control software for high-feedrate, tight-tolerance machining of complex 3-D contours.
  • Tool Center Point (TCP) control permits programming based on the tool tip.
  • C-axis rotation is 360°.

Safety

  • Functions are included to prevent interference between the spindle and trunnion during automatic operation.
  • Maximum workpiece size is 1,000 mm diameter by 500 mm, with limitations.
  • Maximum tool diameter is 140 mm with limitations.
  • Maximum tool weight is 8 kg.
↑↓ navigate↵ openesc close