Machine Schema
Connect MCP

DN Solutions PUMA VTR1620M

The PUMA VTR1620M is a vertical turning center in DN Solutions' PUMA VTR series. It cuts workpieces up to 2000 mm in diameter and 1800 mm in length, with X- and Z-axis travels of 2220 mm and 1200 mm and rapid traverse rates of 12 m/min (X) and 10 m/min (Z). A main spindle reaches 300 r/min with 45/37 kW of power and 24668 N·m of torque.

Source checked2026-10-26DN SolutionsCNC lathe
Ø 2,0001,800SPINDLE 300 rpmPUMA VTR1620M · TURNING ENVELOPESwing and length to scale
Travel X
2,220mm
Travel Z
1,200mm
Spindle max
300rpm
Spindle power
45kW
Weight
40,000kg

Specification

1 source
Categorycnc lathe
Rapid traverse12 m/min
Max turning diameter2,000 mm
Max turning length1,800 mm

Quick answers

How much does the DN Solutions PUMA VTR1620M weigh?
40000 kg, per DN Solutions (dn-solutions.com).
What is the maximum spindle speed of the DN Solutions PUMA VTR1620M?
300 rpm, per DN Solutions (dn-solutions.com).
What is the X-axis travel of the DN Solutions PUMA VTR1620M?
2220 mm, per DN Solutions (dn-solutions.com).

Study notes

  • The machine is built on a one-piece bed with a wide-column structure mounted on top.
  • X-axis rapid traverse is 12 m/min and Z-axis rapid traverse is 10 m/min.
  • Overall dimensions are 6500 mm length, 6345 mm height and 4757 mm width.
  • Max. spindle torque of the PUMA VTR1620M is 24668 N·m; spindle power is listed as 45/37 kW.
  • The wider PUMA VTR series spans max. turning diameters from 1250 mm to 2500 mm and max. turning heights from 750 mm to 2000 mm.
  • The series uses a ram tool index system with a quad-tool holder, allowing four tools to be used directly through the ram without the ATC.
  • The servo-driven ATC tool magazine holds 12 to 34 tools, depending on the model.
  • An automatic chuck changer is available as an option.
  • The PUMA VTR2025 series reaches a max. spindle torque of 41160 N·m.

Safety

  • Fully enclosed splash guard with automatic open/close roof is fitted on the PUMA VTR1012FC / 1216FC models.
  • High pressure 150 bar through-tool coolant can be applied on the FC models.
↑↓ navigate↵ openesc close