Machine Schema
Connect MCP

DN Solutions PUMA TL2000

The PUMA TL2000 is a horizontal turning centre in DN Solutions' PUMA TL series, fitted with upper and lower turrets so that two tools can cut at the same time on shaft-type work such as camshafts and crankshafts. It takes an 8 inch chuck, turns up to 600 mm in length, and its main spindle runs to 5000 r/min from a 22 kW motor. A programmable tailstock supports longer components.

Source checked2026-10-26DN SolutionsCNC lathe
Travel X
250mm
Travel Z
650mm
Spindle max
5,000rpm
Spindle power
22kW
Axes
4

Specification

1 source
Categorycnc lathe
Weight7,200 kg
Rapid traverse24 m/min
Tool capacity12
Max turning length600 mm

Quick answers

How many axes does the DN Solutions PUMA TL2000 have?
4, per DN Solutions (dn-solutions.com).
How much does the DN Solutions PUMA TL2000 weigh?
7200 kg, per DN Solutions (dn-solutions.com).
What is the maximum spindle speed of the DN Solutions PUMA TL2000?
5000 rpm, per DN Solutions (dn-solutions.com).
What is the X-axis travel of the DN Solutions PUMA TL2000?
250 mm, per DN Solutions (dn-solutions.com).

Study notes

  • Chuck size is 8 inch.
  • Max spindle torque is 477 N·m.
  • Machine dimensions: length 3250 mm, height 1930 mm, width 2118 mm.
  • Max turning diameter is listed as 370/240 mm in the metric table; the imperial figures on the page are garbled.
  • Rapid traverse is 20 m/min on X and 24 m/min on Z.
  • Highlights section states 20 stations (12+8 turret stations) while the specification table lists 12 tool stations for this model.
  • Simultaneous 4-axis work comes from the upper and lower turrets; a programmable tailstock is used for longer parts.
  • Other models on the same page: PUMA TL2000LM, PUMA TL2500, PUMA TL2500L, PUMA TL2500XL, PUMA TL2500LM, PUMA TL2500XLM and TL 4100.
  • No rotary tool speed is given for the PUMA TL2000 in the specification table.
↑↓ navigate↵ openesc close