Machine Schema
Connect MCP

DN Solutions Mynx 5400/50 II

The Mynx 5400/50 II is a vertical machining centre in the DN Solutions Mynx II series, fitted with an ISO #50 tool taper and a spindle that turns up to 6000 r/min. It has 1020 mm of X-axis travel, 550 mm of Y-axis travel and 530 mm of Z-axis travel, with a 1200 x 540 mm table rated for workpieces up to 1000 kg. Rapid traverse is 30 m/min on X and Y and 24 m/min on Z.

Source checked11/11 values · 2026-10-25DN SolutionsCNC mill
X 1,020Y 550Z 530SPINDLE 6,000 rpmISO #50ALL DIMENSIONS mmMynx 5400/50 II · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
1,020mm
Travel Y
550mm
Travel Z
530mm
Spindle max
6,000rpm
Weight
7,500kg

Specification

1 source
Categorycnc mill
Spindle taperISO #50
Rapid traverse30 m/min
Table length1,200 mm
Table width540 mm
Table load1,000 kg

Quick answers

How much does the DN Solutions Mynx 5400/50 II weigh?
7500 kg, per Mynx 5400/50 II - Products - DN Solutions (dn-solutions.com).
What is the maximum spindle speed of the DN Solutions Mynx 5400/50 II?
6000 rpm, per Mynx 5400/50 II - Products - DN Solutions (dn-solutions.com).
What is the X-axis travel of the DN Solutions Mynx 5400/50 II?
1020 mm, per Mynx 5400/50 II - Products - DN Solutions (dn-solutions.com).

Study notes

  • The document states that specifications are based on the global standard and may differ by region.
  • The Mynx II series is described as a mid-to-large-sized heavy duty machining centre line; other models in the series have different travels and spindle options.
  • Y-axis capacity across the series ranges from 550 mm to 950 mm according to the highlights section.
  • The machine is fitted with a CAM-type tool changer intended for faster tool changes.
  • An EOP facility is provided for job set-up, programming and troubleshooting.
  • The page lists dimensions of 2467 mm length, 3350 mm width and 2920 mm height; these have no matching schema field and are not recorded as specs.
  • The metric spindle power figure on the page (286.5 kW) does not agree with the imperial value (20 hp), so spindle power was not recorded.
↑↓ navigate↵ openesc close