Machine Schema
Connect MCP

DN Solutions DVF 8000T

The DVF 8000T is a five-axis vertical machining centre in the DN Solutions DVF series, with 1000 mm X, 900 mm Y and 685 mm Z travels. It uses a tilting rotary table of 800 mm diameter with a table turning function, and an 18000 r/min spindle with HSK-T63 taper. It is intended for machining complex parts in a single setup.

Source checked11/11 values · 2026-10-25DN SolutionsCNC mill
X 1,000Y 900Z 685SPINDLE 18,000 rpm22 kWHSK-T6360 TOOLSALL DIMENSIONS mmDVF 8000T · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
1,000mm
Travel Y
900mm
Travel Z
685mm
Spindle max
18,000rpm
Spindle power
22kW

Specification

1 source
Categorycnc mill
Weight25,000 kg
Spindle taperHSK-T63
Rapid traverse45 m/min
Tool capacity60
Table load700 kg

Quick answers

How much does the DN Solutions DVF 8000T weigh?
25000 kg, per DN Solutions (dn-solutions.com).
What is the maximum spindle speed of the DN Solutions DVF 8000T?
18000 rpm, per DN Solutions (dn-solutions.com).
What is the X-axis travel of the DN Solutions DVF 8000T?
1000 mm, per DN Solutions (dn-solutions.com).

Study notes

  • The DVF series is described as 5-axis vertical machining centres; the DVF 8000T carries a tilting table (B and C axes).
  • Table turning function is stated for the DVF 6500T and DVF 8000T models.
  • C-axis rapid traverse is listed as 600 r/min and B-axis rapid traverse as 25 r/min for this model.
  • X, Y and Z rapid traverse are each 45 m/min.
  • Rotary table diameter is 800 mm; maximum workpiece weight is 700 kg.
  • Tool magazine capacity for this model is 60 stations.
  • Machine dimensions are 4097 mm length, 2950 mm width and 3765 mm height; machine weight is 25000 kg.
  • Series highlights state a 12000/18000 r/min spindle, tool length measurement probe as standard, spindle and structure thermal compensation, and standard spindle cooling.
  • The series tool magazine is stated to hold up to 120 tools, and multi-pallet systems are offered for unmanned running; compact automation options listed are AWC, RPS and LPS.
  • The DVF 8000T/50 variant is stated to use a 426 N·m spindle with HSK-T100 taper.
  • Specifications are stated to be based on the global standard and may differ by region.
↑↓ navigate↵ openesc close