Machine Schema
Connect MCP

DN Solutions DNM 750 II

The DNM 750 II is a vertical machining center with a 1630 mm x-axis, 762 mm y-axis and 650 mm z-axis travel. Its direct-coupled main spindle runs up to 8000 r/min at 18.5 kW, and it uses an ISO #40 (7/24 taper) tool interface. All three linear axes rapid traverse at rates up to 30 m/min, and the table accepts workpieces up to 1500 kg.

Source checked12/12 values · 2026-10-25DN SolutionsCNC mill
X 1,630Y 762Z 650SPINDLE 8,000 rpm18.5 kWISO #40{7/24 TAPER}ALL DIMENSIONS mmDNM 750 II · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
1,630mm
Travel Y
762mm
Travel Z
650mm
Spindle max
8,000rpm
Spindle power
18.5kW

Specification

1 source
Categorycnc mill
Weight13,500 kg
Spindle taperISO #40{7/24 TAPER}
Rapid traverse30 m/min
Table length1,630 mm
Table width760 mm
Table load1,500 kg

Quick answers

How much does the DN Solutions DNM 750 II weigh?
13500 kg, per DNM 750 II - Products - DN Solutions (dn-solutions.com).
What is the maximum spindle speed of the DN Solutions DNM 750 II?
8000 rpm, per DNM 750 II - Products - DN Solutions (dn-solutions.com).
What is the X-axis travel of the DN Solutions DNM 750 II?
1630 mm, per DNM 750 II - Products - DN Solutions (dn-solutions.com).

Study notes

  • Part of the DNM series of vertical machining centers; the series has a global installed base in excess of 30000 machines.
  • Direct-coupled spindle is used instead of a belt-driven type.
  • Grease lubrication for the axis roller guideways is supplied as standard.
  • The EOP function is accessed via a pop-up window on the NC main screen.
  • Maximum spindle torque is 118 N·m.
  • Machine dimensions: 3480 mm length, 3170 mm height, 3850 mm width.
  • Z-axis rapid traverse is 24 m/min, lower than the 30 m/min of the X and Y axes.
  • Specifications are based on the global standard and may differ by region.
↑↓ navigate↵ openesc close