Machine Schema
Connect MCP

DN Solutions DBC 130S

The DBC 130S is a horizontal boring mill in the DN Solutions DBC series of medium to large-capacity boring machines. It has 2000 mm X-axis, 1500 mm Y-axis and 1200 mm Z-axis travels, with a 1600 x 1400 mm table rated for workpieces up to 8000 kg. The spindle runs up to 2500 rpm with an ISO #50 tool taper, and all three linear axes rapid traverse at 12 m/min.

Source checked12/12 values · 2026-10-26DN SolutionsCNC mill
X 2,000Y 1,500Z 1,200SPINDLE 2,500 rpm37 kWISO #50ALL DIMENSIONS mmDBC 130S · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
2,000mm
Travel Y
1,500mm
Travel Z
1,200mm
Spindle max
2,500rpm
Spindle power
37kW

Specification

1 source
Categorycnc mill
Weight30,000 kg
Spindle taperISO #50
Rapid traverse12 m/min
Table length1,600 mm
Table width1,400 mm
Table load8,000 kg

Quick answers

How much does the DN Solutions DBC 130S weigh?
30000 kg, per DN Solutions (dn-solutions.com).
What is the maximum spindle speed of the DN Solutions DBC 130S?
2500 rpm, per DN Solutions (dn-solutions.com).
What is the X-axis travel of the DN Solutions DBC 130S?
2000 mm, per DN Solutions (dn-solutions.com).

Study notes

  • Maximum spindle torque is listed as 3028 N·m.
  • Spindle power is given as 37/30 kW (50/40 hp), a dual rating; 37 kW is the higher figure.
  • Machine dimensions are 5540 mm length, 4440 mm height and 5930 mm width.
  • Tool change is performed by a servo-driven automatic tool changer; the number of tool positions is not stated.
  • X, Y and Z axes each rapid traverse at 12 m/min (472 ipm).
  • The DBC series is described as a medium to large-capacity horizontal boring mill series.
↑↓ navigate↵ openesc close