Machine Schema
Connect MCP

DMG MORI SPRINT 50

The DMG MORI SPRINT 50 is a 4-axis production turning machine for automatic turning with collet and chuck. It uses main and counter spindles rated at 7,000 rpm and 16 kW nominal, with up to 36 tool stations across turrets. The machine is offered with SIEMENS or FANUC controls and CELOS on a 21.5-inch touchscreen.

Source checked11/11 values · 2026-10-25DMG MORICNC lathe
Ø 140235SPINDLE 7,000 rpmSPRINT 50 · TURNING ENVELOPESwing and length to scale
Travel X
165mm
Travel Y
70mm
Travel Z
235mm
Spindle max
7,000rpm
Spindle power
16kW

Specification

1 source
Categorycnc lathe
Axes4
Tool capacity36
Max turning diameter140 mm
Max turning length235 mm
Bar capacity50 mm

Quick answers

How many axes does the DMG MORI SPRINT 50 have?
4, per SPRINT 50 - Horizontal Production Turning Machines and Lathes - DMG MORI (en.dmgmori.com).
What is the maximum spindle speed of the DMG MORI SPRINT 50?
7000 rpm, per SPRINT 50 - Horizontal Production Turning Machines and Lathes - DMG MORI (en.dmgmori.com).
What is the X-axis travel of the DMG MORI SPRINT 50?
165 mm, per SPRINT 50 - Horizontal Production Turning Machines and Lathes - DMG MORI (en.dmgmori.com).

Study notes

  • Main and counter spindle torque is stated as 75 Nm.
  • Driven tool spindles reach up to 8,000 rpm, 10 Nm and 1.5 kW nominal.
  • Each turret carries 12 VDI 25 tool stations with Trifix; each station can be driven.
  • SIEMENS versions are available as two-turret twin concept, three turrets, or three turrets plus B-axis; the FANUC version has two turrets.
  • B-axis uses a torque motor and direct measuring system.
  • FANUC version uses MAPPS V; the control interface is a 21.5-inch Full-HD ERGOline touchscreen with CELOS.
  • Controller capability is stated as up to 10 linear axes, 1 B-axis and 2 C-axes.
  • Machine bed is vertical and thermostable, with free chip fall and 3-point support.
↑↓ navigate↵ openesc close