Machine Schema
Connect MCP

DMG MORI NRX 2000

The DMG MORI NRX 2000 is a CNC lathe intended for mass production of flange parts. It uses spindle 1 and spindle 2 to run two machining processes at the same time. The maximum workpiece diameter is 180 mm and maximum workpiece length is 100 mm, with X-axis and Z-axis strokes of 100 mm and 220 mm.

Source checked5/5 values · 2026-10-25DMG MORICNC lathe
Ø 180100NRX 2000 · TURNING ENVELOPESwing and length to scale
Travel X
100mm
Travel Z
220mm

Specification

1 source
Categorycnc lathe
Max turning diameter180 mm
Max turning length100 mm

Quick answers

What is the X-axis travel of the DMG MORI NRX 2000?
100 mm, per NRX 2000 - Horizontal Production Turning Machines and Lathes - DMG MORI (en.dmgmori.com).

Study notes

  • Document gives machine volume as 14.2 m³ (501.5 ft³) including loader, workpiece stocker and rear left discharge type chip conveyor.
  • Machine width is 1,650 mm (65.0 in.) without loader; machine height is 2,100 mm (82.7 in.), allowing loading into 20 ft dry containers.
  • It runs two machining processes at the same time with spindle 1 and spindle 2.
  • Control and software alternatives listed are MAPPS and Fanuc.
  • The operation system is DMG MORI MAPPS - COMPACTline with a 12.1-inch multi-touch operation panel.
  • Turrets are at the front for access to chucks, turrets and transfer equipment; an integral molded round chip chute is used for chip disposal.
↑↓ navigate↵ openesc close