What is the X-axis travel of the DMG MORI CTX 350?

250 mm, per CTX 350 - Universal Turning - DMG MORI (en.dmgmori.com).

DMG MORI CTX 350

The CTX 350 is a universal turning center for machining small parts, accepting workpieces up to 320 mm in diameter and 540 mm in length. It combines turning with milling capability through a turret, and can be fitted with an optional counter spindle, star turret and automation. Axis travels are 250 mm in X, 100 mm in Y and 550 mm in Z.

Source checked7/7 values · 2026-10-25DMG MORI CNC lathe

Travel X

250mm

Travel Y

100mm

Travel Z

550mm

Specification

1 source

Category	cnc lathe
Max turning diameter	320 mm
Max turning length	540 mm
Bar capacity	65 mm

Quick answers

What is the X-axis travel of the DMG MORI CTX 350?: 250 mm, per CTX 350 - Universal Turning - DMG MORI (en.dmgmori.com).

Study notes

Control and software alternatives listed are SIEMENS and Fanuc; neither matches a controller entry in the reference list.
Y-axis stroke is stated as +/- 50 mm, giving a total Y travel of 100 mm.
Main spindle is an A2-6 integrated spindle ISM65 with hollow cylinder diameter 65 mm; drive rating 13/14 kW at 100/40% duty cycle, 5500 rpm.
Optional counter spindle is an integrated spindle motor ISM 50, partially hollow with 50 mm bore, rated 8/9 kW (100%-40% ED) at 6000 rpm.
Turrets are prepared for 50 bar coolant pressure, use air/oil lubrication and are rated for 100% duty cycle in milling.
An optional DirectDrive turret drive reaches up to 12,000 rpm.
Synchronous (IPM) motors and hydraulic pumps with inverter control are used for energy efficiency.
C-axis is controlled by a measuring system mounted near the front bearings; direct measuring systems in X and Y are standard.
Also available with integrated IMTR automation, Robo2Go interface, or a shaft unloading device.

Safety

Turret coolant system is designed for pressures up to 50 bar.