Machine Schema
Connect MCP

Brother W1000Xd2

The Brother W1000Xd2 is a vertical CNC machining center with a 30-taper spindle and travels of 1,000 mm on X, 500 mm on Y and 380 mm on Z. It runs the Brother CNC-D00 control and a 14/21/28-position tool magazine, with a standard spindle speed range of 1 to 12,000 min-1. A five-axis variant, the W1000Xd2-5AX, uses the CNC-D00v (DB) control and adds tool center point control for simultaneous five-axis machining.

Source checked14/14 values · 2026-10-25BrotherCNC mill
X 1,000Y 500Z 380SPINDLE 12,000 rpmMAS-BT30ALL DIMENSIONS mmW1000Xd2 · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
1,000mm
Travel Y
500mm
Travel Z
380mm
Spindle max
12,000rpm
Axes
5

Specification

1 source
Categorycnc mill
Weight3,350 kg
Spindle taperMAS-BT30
Rapid traverse56 m/min
Table length1,100 mm
Table width500 mm
Table load300 kg
Supply voltageAC 200 to 230 V±10%, 3-phase, 50/60Hz±2%

Quick answers

How many axes does the Brother W1000Xd2 have?
5, per W1000Xd2 | Machine Tools | Brother (machinetool.global.brother).
How much does the Brother W1000Xd2 weigh?
3350 kg, per W1000Xd2 | Machine Tools | Brother (machinetool.global.brother).
What is the maximum spindle speed of the Brother W1000Xd2?
12000 rpm, per W1000Xd2 | Machine Tools | Brother (machinetool.global.brother).
What is the X-axis travel of the Brother W1000Xd2?
1000 mm, per W1000Xd2 | Machine Tools | Brother (machinetool.global.brother).

Study notes

  • CNC unit for the W1000Xd2 is CNC-D00; the W1000Xd2-5AX variant uses CNC-D00v (DB).
  • Standard spindle: 12,000 min-1, max torque 40 N·m, max output 18.9 kW. Optional 20,000 min-1: 27 N·m, 15.4 kW. Optional 10,000 min-1 high-torque: 92 N·m, 26.2 kW.
  • Main spindle motor for the 12,000 min-1 specification: 10.1/7.0 kW (10 min/continuous). Axis feed motors: X and Y 1.0 kW, Z 2.0 kW.
  • Tool storage capacity 14 / 21 / 28 tools. Max tool length 250 mm, max tool diameter ⌀110 mm, max tool weight 3.0 kg (4.0 kg with parameter change); total tool weight 25 kg for 14 tools, 35 kg for 21 or 28 tools.
  • Tool change times: tool-to-tool 0.6 s (14 or 21 tools) / 0.7 s (28 tools); chip-to-chip 1.3 s / 1.4 s.
  • Cutting feed rate 1 to 30,000 mm/min on X, Y and Z (value with high accuracy mode B).
  • Accuracy of bidirectional axis positioning (ISO230-2:1988) 0.006 to 0.020 mm; repeatability of bidirectional axis positioning (ISO230-2:2014) less than 0.004 mm.
  • Memory capacity 500 Mbytes (3 Gbytes optional), total capacity of program and data bank; up to 4,000 registrable programs.
  • Least input increment 0.001 mm / 0.0001 inch / 0.001 deg (0.0001 mm with optional submicron command).
  • Required floor space 2,410 x 2,233 mm with control unit door open, not including the coolant tank; machine height 2,633 mm.
  • Distance between table top and spindle nose end 150 to 530 mm.
  • Coolant Through Spindle (CTS) and BT dual contact spindle (BIG-PLUS) are options; CTS is selectable at 3 MPa or 7 MPa.

Safety

  • Max table loading capacity is 300 kg as standard; 500 kg requires a parameter change (table travel time is changed).
  • Max tool weight 4.0 kg requires a parameter change, which also changes tool indexing time.
  • Regular air pressure required: 0.4 to 0.6 MPa (recommended value 0.5 MPa); required flow 45 L/min. Set the pressure higher than the recommended value depending on machine specifications, machining program details, or peripheral equipment.
  • The machine may need to be equipped with a relocation detection device depending on the destination; those machines carry "RD" at the end of the model name.
  • Maximum tool length, diameter and weight are limited depending on spindle speed in use, configuration and center of gravity.
  • Only the W1000Xd2-5AX supports tool center point control, which is subject to restrictions on the axis configuration.
↑↓ navigate↵ openesc close